Export limit exceeded: 376128 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376128 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68135 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-68142 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: geneve: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns geneve->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in geneve->net can rewrite a geneve device whose underlay lives in geneve->net. geneve_changelink() applies the new configuration against geneve->net: geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair reopen the underlay sockets in that netns (geneve_sock_add() uses geneve->net), so the same reasoning as the tunnel changelink series applies here. Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68148 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_direct_keys' table caches master keys that are used by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY. It's just a global table for all filesystems (since the keys can be provided by the legacy process-subscribed keyrings mechanism, which makes it difficult to reuse super_block::s_master_keys). The entries in it ('struct fscrypt_direct_key') do contain a super_block pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when the last inode that references the key is evicted. However, when finding the fscrypt_direct_key for an inode, we weren't actually comparing the super_block pointer. As a result, inodes with different super_blocks could point to the same fscrypt_direct_key. That could extend the lifetime of a fscrypt_direct_key beyond the super_block it points to, causing a use-after-free later. Fix this by creating distinct fscrypt_direct_key structs for distinct super_block structs. Note that this problem doesn't exist in the v2 policy equivalent ("per-mode keys"), since the data structures there are per super_block. | ||||
| CVE-2026-68149 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE. | ||||
| CVE-2026-68156 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the old ceph_buffer and its vec.iov_base, but auth->authorizer_buf still points at that freed memory. A subsequent msgr1 reconnect can therefore queue the stale pointer and trigger a KASAN slab-use-after-free in _copy_from_iter() while tcp_sendmsg() copies the authorizer. Refresh auth->authorizer_buf and auth->authorizer_buf_len after a successful authorizer rebuild so the messenger sends the current buffer. | ||||
| CVE-2026-68158 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | ||||
| CVE-2026-68159 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | ||||
| CVE-2026-68165 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-68167 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that the check inside get_new_location() triggered: BTRFS info (device loop0): found 31 extents, stage: move data extents BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607 item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160 inode generation 5 transid 0 size 0 nbytes 0 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0 atime 1669132761.0 ctime 1669132761.0 mtime 1669132761.0 otime 0.0 item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12 index 0 name_len 2 item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160 inode generation 1 transid 16 size 733184 nbytes 106496 block group 0 mode 100600 links 0 uid 0 gid 0 rdev 0 sequence 24 flags 0x18 item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68 generation 16 type 0 inline extent data size 47 ram_bytes 4096 compression 1 [...] item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0 BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337 ------------[ cut here ]------------ btrfs_abort_should_print_stack(__error) [CAUSE] The above dump tree shows the first file extent item is inlined, which should make no sense for data reloc inodes, as such inodes just represent where the data extents are in the relocation destination chunk. However the relocation path preallocates space for each block, then dirties them, cluster by cluster. It's possible to have a single block at the beginning of the block group, and no other block in the same cluster. So relocation will preallocate a file extent for that block and dirty the first block. Then memory pressure forces the data reloc inode to be written back, before any other blocks are dirtied/allocated. Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated delalloc helper") changed the sequence of delalloc. Before that commit we always tried NOCOW first, so that dirtied block would be written back into the preallocated space, and appear as a regular extent. But with that commit, we always try inline first, and since compression is forced, we try compressing the first block, and then inline the compressed data, resulting in the above inlined file extent in the data reloc tree. Then the check in get_new_location() will check the file offset, without checking if the file extent is inlined or not, resulting in the above failure. [FIX] Do not allow compression for data reloc inodes. Since data reloc inode sizes are always block aligned, as long as we do not compress, @data_len will always be at least one block, and that will cause can_cow_file_range_inline() to return false, thus no inlined extent will be created. | ||||
| CVE-2026-68170 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready() -> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog entry referencing the ssk while the cleanup loop was in progress. Such an entry could be missed by the cleanup, or the concurrent list update could corrupt the traversal, leaving skb->sk pointing at the ssk after it is freed. A later mptcp_backlog_purge() then dereferences the stale pointer, triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0) followed by a use-after-free in mptcp_backlog_purge(). Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after subflow->closing is set to 1 and while the ssk lock is still held, serialized under mptcp_data_lock(). The cleanup runs only on the push path (MPTCP_CF_PUSH), where backlog references accumulate; on other teardown paths the caller already handles cleanup. With subflow->closing set and mptcp_data_lock() held across the purge, any concurrent mptcp_data_ready() either completes its enqueue before the purge runs and is caught, or observes closing=1 and bails out. Once mptcp_data_unlock() is reached, no new skb referencing the ssk can be enqueued, so the cleanup is exhaustive. Remove the unprotected traversal from mptcp_close_ssk() entirely. | ||||
| CVE-2026-68176 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev If the mmio_pipe_open() fails to find a PCI device, the hiter->dev will be assigned to NULL. The mmiotrace read() function dereferences the hiter->dev if hiter exists. Change the test of the read to not only check hiter being NULL, but also the hiter->dev before dereferencing it. | ||||
| CVE-2026-68177 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from freeing, but can still be triggered until after the RCU grace period has ended. The freeing of the enable_event data is put into the private_data_free() callback, but the put of the module refcount is done immediately. It is possible that if a module is removed that has an event that would enable (or disable) it is still active, it can read the data of the module after it is removed causing a use-after-free bug. Move the trace_event_put_ref() that releases the module into the delayed callback so that the module can not be removed until any reference to its events are finished. | ||||
| CVE-2026-68178 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: pin the module while the device is open misc_open() installs a misc driver's file operations with fops_get(), which pins file_operations::owner before replacing the file's f_op. The NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does not take a module reference on the nsm driver. If the driver is built as a module, an open file descriptor can therefore survive rmmod of the module that provides its ioctl callbacks. A later ioctl through that descriptor can call into unloaded module text. Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module while any /dev/nsm file descriptor is open, matching the lifetime expectation for the installed file operations. | ||||
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68299 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively. | ||||
| CVE-2026-16232 | 1 Checkpoint | 3 Multi-domain Management, Multi-domain Security Management, Quantum Security Management | 2026-08-10 | 9.8 Critical |
| An authentication bypass vulnerability in the Check Point SmartConsole login process allows an unauthenticated remote attacker to obtain an application login token and use it to authenticate with full administrative privileges. Successful exploitation allows the attacker to modify security policies and security configurations. Remote exploitation requires internet access to the Management Server IP address and a configuration that does not restrict Trusted Clients. Check Point is aware that this vulnerability is being exploited and has affected a very small number of customers. | ||||
| CVE-2026-68185 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Move jump_label_init() before parse_early_param() When enabling both CONFIG_MEM_ALLOC_PROFILING=y and CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will cause the kernel failed to boot. After analysis, this is because jump_label_init() must be called before parse_early_param(), the early param handlers may modify static keys by static_branch_enable/disable(). Fix this by moving jump_label_init() to before parse_early_param(). The solution is similar to other architectures. | ||||
| CVE-2026-68186 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O' (or 'C') flag. This happens well before it opens the interpreter. If that open fails the flag stays set on the bprm. binfmt_misc is at the head of the format list so an interpreter open failure that returns -ENOEXEC lets the search fall through to a later format. This means it runs the matched binary directly having never staged an interpreter. So bprm->executable is NULL while have_execfd falsely claims a descriptor is present. Consequently, begin_new_exec() dereferences the missing executable: would_dump(bprm, bprm->executable); and NULL derefs. Had it not, the hand-off later in the same function would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL file with -ENOMEM. Both sites are past the point of no return so the exec cannot be unwound either way. This can be reached by unprivileged users as binfmt_misc can be mounted in user namespaces. So a user can register an 'O' entry whose interpreter lives on a FUSE mount, have the FUSE server fail the open with -ENOEXEC and execute a native ELF file that matches the entry. have_execfd only means anything alongside the executable it describes which is not set until the interpreter has been opened and staged. So lets raise it there, next to execfd_creds, which is already set at that point. An open failure now leaves it clear, so the fallback format derives credentials from the binary and emits no AT_EXECFD, as it would for any native exec. The argv rewrite load_misc_binary() performs before the open is still not undone. This means the binary sees the interpreter path in argv[0] and its own path in argv[1] but that predates this change and only became observable once the exec stopped faulting. | ||||
| CVE-2026-68194 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus. mt7921_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on USB and SDIO it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Call Trace: mt7921_mac_tx_free+0x64/0x310 [mt7921_common] mt7921_rx_check+0x5f/0xf0 [mt7921_common] mt76u_rx_worker+0x1b9/0x620 [mt76_usb] Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices"). | ||||