Export limit exceeded: 430617 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26769 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26769 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99759 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.1 Low |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: don't drop local events queued during TVLV update batadv_tt_tvlv_container_update() read the number of local changes without holding changes_list_lock. batadv_tt_local_event() is not serialized by the commit_lock and can queue new events before the changes_list is flushed: CPU0 CPU1 batadv_tt_tvlv_container_update() num = ...local_changes; batadv_tt_local_event() list_add_tail(...); ...local_changes++; spin_lock_bh(&...changes_list_lock); /* only num events copied but all freed */ The additional events were freed without ever being sent. Other nodes will only notice this via a CRC mismatch and must request the full table. The number of changes and the changes_list must therefore be taken atomically. Events queued afterwards then stay in the tt.changes_list for the next TT round. The changes can no longer be kept for the next round when the TVLV buffer allocation fails. But they would be sent with a skipped TTVN anyway, so the other nodes have to request the full table in this case either way. The last changeset is only dropped in this case when the TTVN was incremented. Without new changes, it still describes the current TTVN. Previously, the unconsumed changes caused a retry of the TVLV container update in the next commit round. Since the changes are now consumed, the next round would only take the path without changes and wait for BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until then, the outdated container with the previous TTVN would still be announced. The ogm_append_cnt is therefore reset on failure to retry the update in the next OGM interval. This doesn't make the CRC consistent with the announced changeset. The local table modifications are still not serialized with the commit and batadv_tt_local_transition_new() can still make a client part of the CRC for which the event is only part of the next TT round. Such an inconsistency is detected by the CRC check of the other nodes and solved via a full table request. | ||||
| CVE-2026-99762 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: validate tracker padding before forwarding A multicast tracker with an even number of destinations needs two padding bytes after its destination list. batadv_mcast_forw_packet() currently only checks that the count field and the addresses fit in the tracker TVLV. If an unpadded even tracker is compacted to an odd number of destinations, batadv_mcast_forw_shrink_update_headers() includes those missing padding bytes in the amount to remove. The subsequent memmove can then write two bytes past the old packet tail. With no tailroom, this corrupts skb_shared_info. Include the required padding in the existing tracker length check. This rejects the malformed tracker before either received or locally generated packets can reach the compactor. | ||||
| CVE-2026-99763 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: 9p: don't decrement a server-owned zero nlink A 9P2000.L server can report nlink=0 for a regular file that still exists. On a cache=loose or cache=fscache mount, lookup stores that value with set_nlink(). A later successful unlink calls v9fs_dec_count(), which still calls drop_nlink() for a non-directory. drop_nlink() warns, and the unsigned link count wraps to 4294967295. fstat() on a descriptor opened before the unlink shows 0 before and 4294967295 after. The warning on the unpatched kernel, trimmed: WARNING: fs/inode.c:408 at drop_nlink+0xac/0xd0, CPU#1: trigger/188 CPU: 1 UID: 0 PID: 188 Comm: trigger Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy) RIP: 0010:drop_nlink+0xac/0xd0 Call Trace: <TASK> v9fs_remove+0x529/0x750 vfs_unlink+0x2f0/0xbd0 filename_unlinkat+0x340/0x6c0 __x64_sys_unlink+0x46/0x70 do_syscall_64+0xe8/0x4f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- Directories whose cached nlink is at most 2 already skip this decrement, because the exported filesystem may not maintain nlink (commit ac89b2ef9b559). cache=none skips it as well (commit 574aa0b479947). cache=mmap does not take this path: it sets neither CACHE_META nor CACHE_LOOSE. A regular file on cache=loose or cache=fscache still does. Its count came from GETATTR and may already be zero, so skip the decrement when i_nlink is already 0. Verified on 7.3-rc4-00537-ga3ff15db6820 with only this change. A server that advertises nlink=0 and accepts the unlink no longer warns, and the open descriptor stays at nlink 0. An honest server on the same mount still goes from 1 to 0. A rejected unlink leaves the count unchanged. cache=none is unchanged. With panic_on_warn the unpatched kernel panics on the warning; the patched kernel does not. | ||||
| CVE-2026-99764 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: 9p/xen: validate the response size from the backend p9_xen_response() takes the length of an incoming response from the ring -- the first field of the 9p header, which the Xen transport reuses as its framing header -- and uses it to advance the consumer index, but never checks that it is at least the header size or no larger than the number of bytes the backend has actually produced. A malicious or buggy backend can post a response whose size is smaller than the header (for example 0). The consumer index then never advances, so the response work re-reads the same ring contents instead of making progress. In testing this raced with the teardown that the malformed reply triggers and dereferenced a freed p9_client: 9pfs 9pfs-0: Wrong req tag=ffff BUG: kernel NULL pointer dereference, address: 0000000000000060 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: events p9_xen_response RIP: 0010:idr_find+0x4/0x10 RSP: 0018:ffffbf5d80063de8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffa229c21195a0 RCX: ffffa229c2400000 RDX: ffffa229c11c2200 RSI: 000000000000ffff RDI: 0000000000000050 RBP: 000000000000ffff R08: 3fffffffffffdfff R09: ffffffffffffffff R10: 3fffffffffffdfff R11: ffffffff87a60e80 R12: 0000000000000050 R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000100000 FS: 0000000000000000(0000) GS:ffffa22a7661c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 000000003ac34002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> p9_tag_lookup+0x2b/0x90 p9_xen_response+0x17c/0x2e0 process_one_work+0x16a/0x3a0 worker_thread+0x172/0x2e0 kthread+0xdd/0x110 ret_from_fork+0x18b/0x240 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000060 ---[ end trace 0000000000000000 ]--- Reject a response whose size is outside [sizeof(header), queued] before using it, matching the validation the backend already applies to incoming requests. | ||||
| CVE-2026-99321 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them. | ||||
| CVE-2026-99323 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix invalid pointer dereference when get_inode_acl() fails When get_inode_acl() fails, it returns an ERR_PTR(), but ksmbd_acls_fattr() stored that pointer in smb_fattr without checking for errors. Later callers then passed the error pointer to security descriptor helpers or posix_acl_release(), resulting in an invalid pointer dereference. This was reproduced on an XFS-backed share when xfs_get_acl() returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client triggered the crash: BUG: unable to handle page fault for address: fffffffffffffff8 RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd] Call Trace: smb2_query_info+0x40d/0x17c0 [ksmbd] handle_ksmbd_work+0x1ca/0x770 [ksmbd] Fix this by checking the return values from get_inode_acl() in ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is available, and propagate all other errors to the callers. Update smb2_open() and smb2_get_info_sec() to handle these errors. | ||||
| CVE-2026-99324 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding. | ||||
| CVE-2026-99325 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed. | ||||
| CVE-2026-99326 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work. | ||||
| CVE-2026-99327 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus. | ||||
| CVE-2026-99328 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first. | ||||
| CVE-2026-99329 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research. | ||||
| CVE-2026-99330 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||
| CVE-2026-99331 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||
| CVE-2026-99332 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift. | ||||
| CVE-2026-99333 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports. | ||||
| CVE-2026-99334 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches. | ||||
| CVE-2026-99335 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready Wait to bind a memslot to a guest_memfd instance until *after* the memslot is fully prepared, as creating the binding in guest_memfd will effectively expose the memslot to readers. As pointed out by Sashiko, binding the memslot before it's ready to be exposed to the rest of the world can break various memslot assumption and rules. E.g. x86 could observe a NULL rmap pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created, but before KVM made it through kvm_prepare_memory_region(). | ||||
| CVE-2026-99661 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast The overflow check in gup_fast_fallback() only covers the addition to start. The preceding nr_pages << PAGE_SHIFT can already have truncated the length on 32bit. Users such as RapidIO's rio_dma_transfer() can derive such page counts from a 64-bit userspace length. Let's just check_shl_overflow() to reject any such overflow with -EOVERFLOW early. | ||||
| CVE-2026-99662 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||