Export limit exceeded: 378695 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378695 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378695 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74400 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to lock the inode of the supplied dentry without checking if it is NULL. If a negative dentry is passed (e.g. from security_inode_create), d_inode(dentry) returns NULL, and inode_lock(inode) will cause a NULL pointer dereference. Trivially fix this by adding a NULL check for inode before attempting to lock it, returning -EINVAL if it is NULL. Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and bpf_xattr_write_permission(). These warnings could be triggered by passing a negative dentry to bpf_get_dentry_xattr() or the _locked variants of the xattr kfuncs, potentially causing a Denial of Service on systems with panic_on_warn enabled. Instead, simply return -EINVAL. | ||||
| CVE-2026-74418 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-fence: Fix potential tracepoint null pointer dereferences Trace_dma_fence_signaled, trace_dma_fence_wait_end and trace_dma_fence_destroy can all currently dereference a null fence->ops pointer after it has been reset on fence signalling. Lets use the safe string getters for most tracepoints to avoid this class of a problem, while for the signal tracepoint we move it to before ops are cleared to avoid losing the driver and timeline name information. Apart from moving it we also need to add a new tracepoint class to bypass the safe name getters since the signaled bit is already set. For dma_fence_init we also need to use the new tracepoint class since the rcu read lock is not held there, and we can do the same for the enable signaling since there we are certain the fence cannot be signaled while we are holding the lock and have even validated the fence->ops. | ||||
| CVE-2026-74420 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page objects, which GPUSVM requires in order to operate correctly. In particular, get_pages() relies on hmm_range_fault() to resolve struct pages for the target range. Attempting to create an SVM range on such VMAs results in repeated get_pages() failures and can lead to an infinite loop inside a driver’s page‑fault handler. Prevent this by rejecting ranges on VM_IO or VM_PFNMAP VMAs and returning -EIO. | ||||
| CVE-2026-74423 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix leak when pinning ubuf pages When pin_user_pages_fast() returns fewer pages than requested, the pages that were successfully pinned are not released, leading to a leak. Fix this by unpinning any partially pinned pages before returning failure. | ||||
| CVE-2026-74426 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: fix NULL pointer dereference in afs_get_tree() afs_alloc_sbi() uses kzalloc for memory allocation. And, if ctx->dyn_root is not null, as->cell and as->volume are null. In trace_afs_get_tree() they are dereferenced. KASAN error message: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550 include/trace/events/afs.h:1365 Call Trace: trace_afs_get_tree include/trace/events/afs.h:1365 [inline] afs_get_tree+0x922/0x1350 fs/afs/super.c:599 vfs_get_tree+0x8e/0x300 fs/super.c:1572 do_new_mount fs/namespace.c:3011 [inline] path_mount+0x14a5/0x2220 fs/namespace.c:3341 do_mount fs/namespace.c:3354 [inline] __do_sys_mount fs/namespace.c:3562 [inline] __se_sys_mount fs/namespace.c:3539 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3539 do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-74501 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix use-after-free in ump_to_endpoint() create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a back-pointer to its per-interface snd_usb_midi2_ump object in ump->private_data, but it never installs an ump->private_free hook and never clears that pointer. If a later step of snd_usb_midi_v2_create() fails, its error path calls free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while the already-registered endpoint keeps pointing at it. The created /dev/snd/umpC*D* node stays exposed, so the first operation of any UMP open, ump_to_endpoint(), dereferences the dangling ump->private_data and reads rmidi->eps[dir] out of freed memory. A malicious USB MIDI 2.0 device that makes creation fail after the endpoint is registered can thus trigger a slab use-after-free read on a subsequent open of the UMP node. Clear the endpoint's back-pointer before freeing the object, and let ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger callbacks fail cleanly (their callers already handle a NULL endpoint) instead of dereferencing a stale pointer. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74353 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: always resume_all after suspend_all Need to restore any good queues even if the suspend_all failed for some. Always run remove_queue as that will schedule a GPU reset is removing the queue fails. v2: move resume_all after remove | ||||
| CVE-2026-74432 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not). | ||||
| CVE-2026-74441 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix race condition and ordering in port unregistration A synchronization issue exists during port unregistration where pending partner work items can race against workqueue destruction, leading to use-after-free conditions: cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__queue_work+0x83/0x4a0 Call Trace: <IRQ> __cfi_delayed_work_timer_fn+0x10/0x10 run_timer_softirq+0x3b6/0xbd0 sched_clock_cpu+0xc/0x110 irq_exit_rcu+0x18d/0x330 fred_sysvec_apic_timer_interrupt+0x5e/0x80 Fix this by ensuring strict ordering and proper serialization during teardown: 1. Move ucsi_unregister_partner() to the beginning of the teardown sequence and protect it under the connector mutex lock. 2. Ensure all pending partner tasks are explicitly flushed and finished before the workqueue is destroyed. 3. Switch from mod_delayed_work() to a cancel_delayed_work() and queue_delayed_work() sequence. This guarantees that items currently marked as pending won't be scheduled an additional time, preventing a double release of resources which leads to the following crash: Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP NOPTI Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker RIP: 0010:ucsi_poll_worker+0x65/0x1e0 Call Trace: <TASK> process_scheduled_works+0x218/0x6d0 worker_thread+0x188/0x3f0 __cfi_worker_thread+0x10/0x10 kthread+0x226/0x2a0 To ensure these rules are applied identically across both the normal teardown and the ucsi_init() error paths, consolidate the cleanup logic into a new helper, ucsi_unregister_port(). | ||||
| CVE-2026-74442 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | ||||
| CVE-2026-74445 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | ||||
| CVE-2026-74368 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the NWIFI header length is invalid, causing the function to abort early with -EINVAL. When this happens, the error propagates to ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it to NULL. As a result, the corresponding MSDU is no longer referenced by the defragmentation path and is never freed. This leads to a memory leak for the affected MSDU on this error path. Proper cleanup is required to ensure the MSDU is released when header validation fails during TKIP MIC verification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74369 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish() In luo_file_unpreserve_files() and luo_file_finish(), reorder module_put() and xa_erase() to ensure the file handler module remains pinned while its operations are being accessed. Specifically, luo_get_id() dereferences fh->ops->get_id, so the module reference must be held until after xa_erase() (which calls luo_get_id) completes. For luo_file_finish(), this requires moving the module_put() call out of the luo_file_finish_one() helper and into the main loop of luo_file_finish() itself. | ||||
| CVE-2026-74379 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dax/kmem: account for partial discontiguous resource upon removal When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed. | ||||
| CVE-2026-74381 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Allow entries in BO caches to be freed When a buffer object is pinned via host1x_bo_pin() with a cache, the resulting mapping is kept in the cache so it can be reused on subsequent pins. Each mapping held a reference to the underlying host1x_bo (taken in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached, the bo itself could not be freed. However, the only way to remove the cached mapping was through the free path of the buffer object. This meant that if a bo got cached, it could never get freed again. Resolve the circularity by holding a weak reference to the bo from the cache side. This is done by having the .pin callbacks not bump the bo's refcount -- instead the common Host1x bo code does so, except for the cache reference. Also move the remove-cache-mapping-on-free code into a common function inside Host1x code. This is only called from the TegraDRM GEM buffers since those are the only ones that can be cached at the moment. | ||||
| CVE-2026-74382 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: prevent unbounded recursion in offload rollback Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u | ||||
| CVE-2026-74391 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Bound synthetic-field strings with seq_buf The synthetic field helpers build a prefixed synthetic variable name and a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The current code appends those strings with raw strcat(), so long key lists, field names, or saved filters can run past the end of the staging buffers. Build both strings with seq_buf and propagate -E2BIG if either the synthetic variable name or the generated command exceeds MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while using the helper intended for bounded command construction. [ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] | ||||
| CVE-2022-49983 | 1 Linux | 1 Linux Kernel | 2026-08-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: Set the DMA mask for the udmabuf device (v2) If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. | ||||
| CVE-2022-49527 | 1 Linux | 1 Linux Kernel | 2026-08-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: avoid null dereference in deinit If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary. | ||||
| CVE-2022-48877 | 2026-08-15 | 5.5 Medium | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||