Export limit exceeded: 24396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93063 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow. | ||||
| CVE-2026-93062 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well. | ||||
| CVE-2026-93061 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnprintf(), which returns the number of bytes actually written. | ||||
| CVE-2026-93060 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix use after free on error path in a6xx_gpu_init() The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points to freed memory. Preserve the error code before freeing the memory to avoid a use after free. Patchwork: https://patchwork.freedesktop.org/patch/732275/ | ||||
| CVE-2026-93059 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix task_struct reference leak in recover_worker get_pid_task() increments the task reference count, but the corresponding put_task_struct() was missing in the else branch, leaking a reference on every GPU hang recovery. Patchwork: https://patchwork.freedesktop.org/patch/730662/ | ||||
| CVE-2026-93058 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/ | ||||
| CVE-2026-93057 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context TX EQTR may run while devfreq gear scaling has quiesced the UFS tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr() and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct reclaim is triggered, reclaim/writeback can depend on I/O to UFS device. Because the queue is quiesced, this can cause deadlock. Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all allocations in the TX EQTR call tree, including: - params->eqtr_record in ufshcd_tx_eqtr() - eqtr_data in __ufshcd_tx_eqtr() - params in ufs_qcom_get_rx_fom() This is preferred over tagging individual call sites with GFP_NOIO, as it automatically covers any future allocations added anywhere in the call tree without requiring each caller to be aware of this constraint. [mkp: fix label as suggested by Bart] | ||||
| CVE-2026-93056 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for the fn_play, fn_cap, and fn_cntl string options. The store function contains an inverted null check on the kstrndup() return value. This means every write attempt returns -ENOMEM on success and dereferences a NULL pointer on allocation failure. The attributes have been broken and unused for many years. Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE, FILE_CONTROL) set in f_audio_alloc_inst() are unaffected. | ||||
| CVE-2026-93055 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: UDF symlink pathComponent header OOB read udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header. Validate that enough input remains for a complete pathComponent header before accessing it. Reject malformed symlink data that would otherwise make udf_pc_to_char() perform an out-of-bounds read. | ||||
| CVE-2026-93054 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-device_add() failures like unregister: remove UIO attributes while the info pointer is still valid, then clear idev->info under info_lock and wake existing waiters/async users before removing the device and minor. This makes already-open file descriptors observe the same "device gone" state as normal uio_unregister_device(). | ||||
| CVE-2026-93053 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds letter_offsets[] by using the first byte of each function name as an index via `(start & 31) - 1`. If function_names are overridden from sysfs (root) with a name starting outside [a–z], the index underflows or exceeds the array, leading to OOB write. Function names can be overridden with the following commands as root: modprobe speakup_soft echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names # then press Insert+2 on /dev/tty This fix checks the first letter in help_init(), and if it is not in the [a–z] range the function returns an error to the caller. Eventually this error is propagated to drivers/accessibility/speakup/main.c:2217, which causes a bleep sound. | ||||
| CVE-2026-93052 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to readers. | ||||
| CVE-2026-93051 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDAC sysfs files manually and then optionally creates the command sysfs group. This leaves probe responsible for rolling back partial sysfs state and makes remove responsible for matching every file that probe created. Move the device attributes into driver core dev_groups for the I2C and SPI drivers and use an is_visible() callback to expose only the attributes supported by the probed device. With this shape, the driver core creates the sysfs files only after probe succeeds and removes them before the remove callback frees the driver data. | ||||
| CVE-2026-93050 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issues arise when the device is removed while a tty session is still active: 1. UAF of struct ipoctal: the remove callback frees ipoctal via kfree() while tty ops may still access it. Fix by introducing kref-based lifetime management — kref is taken in install() when a tty is opened and released in cleanup() when the tty is finally destroyed; remove() uses kref_put() instead of kfree(). 2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove() frees xmit_buf via tty_port_free_xmit_buf() while a userspace process may still hold the tty fd and call write(). Fix by checking for NULL xmit_buf in ipoctal_write_tty(). 3. UAF in ipoctal_cleanup(): ipack_put_carrier(ipoctal->dev) dereferences ipoctal->dev after the ipack_device has been freed by ipack_device_del(). Fix by caching ipoctal->carrier_owner during probe() and calling module_put() on the cached pointer directly in cleanup(), avoiding any access to ipoctal->dev. Also introduce a "removed" flag in struct ipoctal, set at the start of __ipoctal_remove(), and checked in every tty op that accesses hardware resources (port_activate, write_tty, set_termios, hangup, shutdown). This prevents page faults when devm_ioremap() regions are unmapped after remove() returns. | ||||
| CVE-2026-93049 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfs setup failure after successful blktrans registration can free mbd_dev twice. add_mtd_blktrans_dev() initializes the blktrans device reference and publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the disk down and drops the blktrans reference; when that reference reaches zero, blktrans_dev_release() frees the mtd_blktrans_dev. The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell through the common cleanup label and called kfree(mbd_dev) again. Clear the local pointer after deregistration so the common cleanup can still release the mtdswap state without freeing the blktrans object twice. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-93048 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2), since those special offsets rely on cur_offset tracking the previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them") later added MTDPART_OFS_RETAIN (-3) for the static partition table path without updating mtd_add_partition() to also reject this value. With offset=-3 passed via BLKPG, the RETAIN size calculation in allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD = parent_size + 3). If the underflow result does not appear to leave enough space, allocate_partition() jumps to out_register via goto, skipping erasesize initialization. This results in erasesize=0, which triggers: WARN_ON((!mtd->erasesize || !master->_erase) && !(mtd->flags & MTD_NO_ERASE)) in add_mtd_device(). If the underflow result appears to leave enough space, a bogus partition size is calculated, but the "out of reach" sanity check catches the invalid offset and creates a disabled empty partition (offset=0, size=0) instead of returning an error. Fix this by adding MTDPART_OFS_RETAIN to the rejection list in mtd_add_partition(), consistent with the existing handling of APPEND and NXTBLK. | ||||
| CVE-2026-93047 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Associate BOs with every job that accesses them A submission can expand into a chain of jobs (e.g. bin + render + cache clean). Implicit synchronization in v3d_submit_lock_reservations() is gated on each job's bo[], but the BO list was only ever attached to the last job of the chain. When that last job is a trailing CACHE_CLEAN job, the job that actually consumes the BOs (that is, a RENDER or CSD job) was left with bo_count == 0 and picked up no implicit dependencies. It could therefore be dispatched to the hardware and read a BO while another context was still writing it, leading to data corruption. Attach the BOs to the job that consumes them, so (1) it acquires the correct implicit dependencies during reservation locking and (2) they are kept mapped until the end of the submission. Give it references to all consuming job's BOs through v3d_job_reference_bos() instead of looking the handles up a second time; that avoids a redundant lookup and guarantees both jobs reference the exact same objects. As the CACHE_CLEAN job now carries a BO array as well, add a per-job `has_implicit_dep` flag so that only the consuming jobs take implicit dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning waiting on another context is not a realistic scenario) are excluded. | ||||
| CVE-2026-93046 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case. | ||||
| CVE-2026-93045 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range. | ||||
| CVE-2026-93044 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when arena map is used in the prog to disallow interpreter fallback for arena-related insns. | ||||