Export limit exceeded: 20844 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20844 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64006 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ] | ||||
| CVE-2026-64014 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len. | ||||
| CVE-2026-64019 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma mapping leak on data setup error We're leaking the initial DMA mapping during iteration if we fail to allocate the tracking descriptor for both PRP and SGL. Unmap the iterator directly; we can't use the existing unmap helper because it depends on the tracking descriptor being successfully allocated, so a new one for an in-use iterator is provided. The mappings were also leaking when the driver detects an invalid bio_vec when mapping PRPs, so fix that too. | ||||
| CVE-2026-64028 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Avoid NULL return from hist_field_name() on truncation hist_field_name() returns "" everywhere except the fully-qualified VAR_REF/EXPR case, where snprintf() truncation returns NULL early and bypasses the bottom NULL->"" guard. Callers don't expect NULL: strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758 and the strcmp() in the sort-key match loop at :4804 both deref it. system and event_name are bounded by MAX_EVENT_NAME_LEN, but the field name on a VAR_REF is kstrdup'd from a histogram variable name parsed out of the trigger string and has no length cap, so a long enough var name in a fully qualified reference can reach the truncation path. Keep the length check but leave field_name as "" on overflow. | ||||
| CVE-2026-64001 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules. | ||||
| CVE-2026-64012 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked When sfb has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (sfb in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(sfb) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (sfb). And herein lies the problem. - sfb will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full) [ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq] [ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b [ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216 [ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0 [ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3 [ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000 [ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000 [ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000 [ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0 [ 127.598390][ T453] PKRU: 55555554 [ 127.598509][ T453] Call Trace: [ 127.598629][ T453] <TASK> [ 127.598718][ T453] ? mark_held_locks+0x40/0x70 [ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599053][ T453] sfb_dequeue+0x88/0x4d0 [ 127.599174][ T453] ? ktime_get+0x137/0x230 [ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq] [ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf] [ 127.599988][ T453] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead. | ||||
| CVE-2026-63957 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. | ||||
| CVE-2026-63948 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. | ||||
| CVE-2026-63956 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. | ||||
| CVE-2026-63963 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. | ||||
| CVE-2026-63936 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized. | ||||
| CVE-2026-63953 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path. | ||||
| CVE-2026-63907 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label. | ||||
| CVE-2026-63873 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range() aie2_populate_range() jumps back to the again label without calling mmput(mm), leaking a reference to the mm_struct. Add the missing mmput() before jumping to again. | ||||
| CVE-2026-63899 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. | ||||
| CVE-2026-63901 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. | ||||
| CVE-2026-63896 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling The WebUSB GET_URL handler in composite_setup() narrows landing_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset; If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the unsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset); ends up copying close to UINT_MAX bytes from cdev->landing_page into cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the memcpy as a 4294967293-byte field-spanning write into url_descriptor->URL (size 252). A USB host can reach this from a single SETUP packet against any gadget that has webusb/use=1 and a landingPage configured. Handle the small-wLength case before the math: when the host requested fewer bytes than the URL descriptor header, only the header is meaningful and no URL bytes need to be copied. Setting landing_page_length to landing_page_offset makes the existing memcpy a no-op and leaves the descriptor returned to the host unchanged for all larger wLength values. | ||||
| CVE-2026-63871 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst, iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock(). These fields may be modified concurrently by connect() or setsockopt() on the same socket, resulting in data-races reported by KCSAN. Fix this by snapshotting the required fields under lock_sock() before calling hci_get_route(). BUG: KCSAN: data-race in memcmp+0x45/0xb0 race at unknown origin, with read to 0xffff8880122135cf of 1 bytes by task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-63878 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check num_entries in GEM_OP GET_MAPPING_INFO kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at amdgpu_gem.c:1050 uses the user-supplied num_entries directly without any upper bounds check. Since num_entries is a __u32 and sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries produces an allocation exceeding INT_MAX, triggering WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING, TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems. Add a size bounds check before we invoke the kvzalloc() to reject oversized num_entries early with -EINVAL. (cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d) | ||||
| CVE-2026-63862 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found In mtk_pcie_setup_irq(), the IRQ domains are allocated before the controller's IRQ is fetched. If the latter fails, the function directly returns an error, without cleaning up the allocated domains. Hence, reverse the order so that the IRQ domains are allocated after the controller's IRQ is found. This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI: mediatek-gen3: add power control support". | ||||