Export limit exceeded: 417539 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417539 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99166 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] | ||||
| CVE-2026-99165 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | ||||
| CVE-2026-99163 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). | ||||
| CVE-2026-99161 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released. | ||||
| CVE-2026-99160 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | ||||
| CVE-2026-99159 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree. | ||||
| CVE-2026-99158 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place. | ||||
| CVE-2026-99157 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. | ||||
| CVE-2026-99156 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: st: Fix use-after-free race between st_remove() and st_open() st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put(). | ||||
| CVE-2026-99155 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: xen/scsifront: Check for a NULL shadow entry on a backend response scsifront_do_response() validates the rqid in a backend response against VSCSIIF_MAX_REQS before using it to index info->shadow[], but then dereferences the entry to test ->inflight without checking that the slot is populated. Shadow slots are NULL before a command is submitted (the host private area is zeroed at allocation) and are reset to NULL in _scsifront_put_rqid() once a request completes, so an in-range rqid that does not correspond to an outstanding request makes the frontend dereference a NULL pointer. A malicious or buggy backend can thus crash the guest by returning a response whose rqid is in range but not in flight -- for example a spurious response before any command has been issued, or a duplicate of one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots, so before the first command every in-range rqid selects a NULL slot. Reject a response whose shadow slot is not populated. | ||||
| CVE-2026-99154 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. | ||||
| CVE-2026-99153 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 | ||||
| CVE-2026-99152 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named by a management response __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206 [ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020 [ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060 [ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 [ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800 [ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000 [ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0 [ 6.298712] PKRU: 55555554 [ 6.298713] Call Trace: [ 6.298714] <IRQ> [ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0 [ 6.298758] iscsi_complete_pdu+0x54/0xa0 [ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80 [ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.298804] __tcp_read_sock+0x1ab/0x810 [ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.298814] tcp_rcv_established+0x1f56/0x3a00 [ 6.298842] tcp_v4_do_rcv+0x449/0x960 [ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 | ||||
| CVE-2026-99150 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr amdgpu_debugfs_gpr_read() drops its runtime PM reference right after reading the wave registers. When copying them to userspace fails, it jumps to the err label, which drops the reference a second time. A read into a bad buffer on Navi31 either steals a reference somebody else holds (power/runtime_usage goes from 1 to 0) or underflows the count: amdgpu 0000:03:00.0: Runtime PM usage count underflow! The registers are already in the kernel buffer at that point, so finish the hardware access first and copy the buffer with a single copy_to_user() instead of the put_user() loop with its own error path. (cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) | ||||
| CVE-2026-99147 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/exec: don't immediately add prelocked obj to array of locked objs When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop. | ||||
| CVE-2026-99143 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit. | ||||
| CVE-2026-99142 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry. | ||||
| CVE-2026-99140 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix hist trigger timestamps for buffered events Syzkaller triggered a WARN_ON_ONCE(!nest) warning: WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp Call trace: ring_buffer_event_time_stamp hist_field_timestamp hist_fn_call event_hist_trigger event_triggers_call __event_trigger_test_discard trace_event_buffer_commit do_trace_event_raw_event_sched_switch trace_event_raw_event_sched_switch The warning is probabilistically reproducible and is related to syzkaller executing the following commands: echo 'prev_pid == 999999' > events/sched/sched_switch/filter echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger The specific triggering process is as follows: CPU 0 CPU 1 (context switching) (echo 'hist:keys=common_timestamp' > \ events/sched/sched_switch/trigger) do_trace_event_raw_event_##call trace_event_buffer_lock_reserve if (!tr->no_filter_buffering_ref && trace_file->flags & EVENT_FILE_FL_FILTERED) return entry; // return directly event_hist_trigger_parse hist_register_trigger tracing_set_filter_buffering(file->tr, true); tr->no_filter_buffering_ref++; __trace_buffer_lock_reserve rb_start_commit local_inc(&cpu_buffer->committing); // skipped and not executed trace_event_buffer_commit __event_trigger_test_discard event_triggers_call event_hist_trigger hist_fn_call hist_field_timestamp ring_buffer_event_time_stamp nest = local_read(&cpu_buffer->committing); WARN_ON_ONCE(!nest) // trigger warning The root cause is that when an event file has a filter attached and the hist trigger has not yet been attached, trace_event_buffer_lock_reserve() writes the event into the per-CPU trace_buffered_event temp buffer instead of reserving it in the ring buffer, so cpu_buffer->committing is not incremented. When the event is later processed at commit time by a hist trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a zero committing count, triggering WARN_ON_ONCE(!nest). tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing: Add tracing_event_time_stamp() API") for exactly this case: if the event is the per-CPU trace_buffered_event, it returns the current ring buffer timestamp. But it never gained a caller. Use it in hist_field_timestamp(), so that a hist trigger that races onto a buffered event records the current time, which is only marginally later than when the event was recorded, instead of warning and recording a bogus timestamp. | ||||
| CVE-2026-99139 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue. | ||||
| CVE-2026-99138 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer. | ||||