Export limit exceeded: 375075 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 375075 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (375075 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68192 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release. Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation. NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-44630 | 1 Apache | 1 Iotdb | 2026-08-10 | N/A |
| Improper validation of length fields in the Apache IoTDB RPC service may allow a remote unauthenticated attacker to cause a denial of service. By sending a crafted malformed Thrift frame, an attacker can cause IoTDB to allocate an excessive amount of memory and crash with an OutOfMemoryError. This issue affects Apache IoTDB: before 1.3.8, from 2.0.0 before 2.0.9. Users are recommended to upgrade to version 2.0.10, which fixes the issue. | ||||
| CVE-2026-44416 | 1 Apache | 1 Ranger | 2026-08-10 | N/A |
| Remote Code Execution via Arbitrary Class Instantiation in plugin-schema-registry component in Apache Ranger <= 2.8.0. Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-68189 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 remove_uuid+0x25e/0x560 hci_sock_sendmsg+0x1033/0x1ea0 Hold hdev->lock while generating and committing the class-of-device and EIR snapshots. Release it before sending an HCI command, so controller waits do not happen under the device lock. This protects all UUID list walks in these paths and restores the serialization lost in the command sync conversion. | ||||
| CVE-2026-68184 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it may not produce an obvious local failure. Reduce cgc->buflen by the same amount as the buffer pointer adjustment so the MODE SELECT transfer covers only the intended parameter list. | ||||
| CVE-2026-68183 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups. | ||||
| CVE-2026-68182 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_parport: deal with premature interrupt Syzbot reported a general protection fault in `comedi_get_is_subdevice_running()`, which was called from the interrupt handler `parport_interrupt()` in the "comedi_parport" driver, but it does not currently have a C reproducer for the problem. It's probably due to a premature interrupt for one of two reasons: 1. The driver sets up the interrupt handler before the comedi subdevices used by the interrupt handler have been allocated, but does not disable the interrupt in the parallel port's CTRL register first. 2. The driver uses a user-supplied I/O port base address which Syzbot would have supplied, but it might not be backed by real parallel port hardware. Change the initialization order in the driver's comedi "attach" handler (`parport_attach()`) so that the hardware registers are initialized before the interrupt handler is requested. This should prevent premature interrupts occurring for real hardware. Also add a test to the interrupt handler to ensure the comedi device is fully attached and return early if it isn't. | ||||
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68178 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: pin the module while the device is open misc_open() installs a misc driver's file operations with fops_get(), which pins file_operations::owner before replacing the file's f_op. The NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does not take a module reference on the nsm driver. If the driver is built as a module, an open file descriptor can therefore survive rmmod of the module that provides its ioctl callbacks. A later ioctl through that descriptor can call into unloaded module text. Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module while any /dev/nsm file descriptor is open, matching the lifetime expectation for the installed file operations. | ||||
| CVE-2026-68177 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from freeing, but can still be triggered until after the RCU grace period has ended. The freeing of the enable_event data is put into the private_data_free() callback, but the put of the module refcount is done immediately. It is possible that if a module is removed that has an event that would enable (or disable) it is still active, it can read the data of the module after it is removed causing a use-after-free bug. Move the trace_event_put_ref() that releases the module into the delayed callback so that the module can not be removed until any reference to its events are finished. | ||||
| CVE-2026-68176 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev If the mmio_pipe_open() fails to find a PCI device, the hiter->dev will be assigned to NULL. The mmiotrace read() function dereferences the hiter->dev if hiter exists. Change the test of the read to not only check hiter being NULL, but also the hiter->dev before dereferencing it. | ||||
| CVE-2026-68173 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: wait on ublk_dev_ready() instead of ub->completion ub->completion is only re-armed by a successful START_USER_RECOVERY. If the ublk server sends END_USER_RECOVERY without one - e.g. its START failed with -EBUSY and the error was ignored - the wait is satisfied by the stale completion of the previous recovery cycle, and the device is marked LIVE and the requeue list kicked while the FETCH stream is still running and ubq->canceling is still set. The kick redispatches a previously requeued request, __ublk_queue_rq_common() sees ->canceling and parks it again via __ublk_abort_rq(), and after the last FETCH clears ->canceling nothing ever kicks the requeue list again: the request is stranded there while holding its tag. If it is the flush machinery's flush_rq, every subsequent fsync piles up in uninterruptible sleep and teardown hangs on tag draining. This matches a report of a lost PREFLUSH with ext4 on top of ublk after daemon crash recovery. ub->completion is an edge-triggered latch used as a proxy for the level condition "every queue has fetched all I/O commands", which can regress (F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop it and wait on the real condition instead: the new helper ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then re-checks it under ub->mutex, waiting again on regression, and returns with the mutex held and readiness guaranteed. Readiness becomes true in the same ub->mutex critical section that clears the last queue's ->canceling, so END_USER_RECOVERY marks the device LIVE and kicks the requeue list strictly after ->canceling clears. The wait stays interruptible, so a server whose daemon died can still be signalled out. For ublk_ctrl_start_dev() this replaces the fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting until the device is ready again. | ||||
| CVE-2026-68170 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready() -> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog entry referencing the ssk while the cleanup loop was in progress. Such an entry could be missed by the cleanup, or the concurrent list update could corrupt the traversal, leaving skb->sk pointing at the ssk after it is freed. A later mptcp_backlog_purge() then dereferences the stale pointer, triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0) followed by a use-after-free in mptcp_backlog_purge(). Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after subflow->closing is set to 1 and while the ssk lock is still held, serialized under mptcp_data_lock(). The cleanup runs only on the push path (MPTCP_CF_PUSH), where backlog references accumulate; on other teardown paths the caller already handles cleanup. With subflow->closing set and mptcp_data_lock() held across the purge, any concurrent mptcp_data_ready() either completes its enqueue before the purge runs and is caught, or observes closing=1 and bails out. Once mptcp_data_unlock() is reached, no new skb referencing the ssk can be enqueued, so the cleanup is exhaustive. Remove the unprotected traversal from mptcp_close_ssk() entirely. | ||||
| CVE-2026-66058 | 1 Frappe | 1 Frappe | 2026-08-10 | N/A |
| Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user. This issue is fixed in versions 16.20.0 and 15.112.0. | ||||
| CVE-2026-68167 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that the check inside get_new_location() triggered: BTRFS info (device loop0): found 31 extents, stage: move data extents BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607 item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160 inode generation 5 transid 0 size 0 nbytes 0 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0 atime 1669132761.0 ctime 1669132761.0 mtime 1669132761.0 otime 0.0 item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12 index 0 name_len 2 item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160 inode generation 1 transid 16 size 733184 nbytes 106496 block group 0 mode 100600 links 0 uid 0 gid 0 rdev 0 sequence 24 flags 0x18 item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68 generation 16 type 0 inline extent data size 47 ram_bytes 4096 compression 1 [...] item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0 BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337 ------------[ cut here ]------------ btrfs_abort_should_print_stack(__error) [CAUSE] The above dump tree shows the first file extent item is inlined, which should make no sense for data reloc inodes, as such inodes just represent where the data extents are in the relocation destination chunk. However the relocation path preallocates space for each block, then dirties them, cluster by cluster. It's possible to have a single block at the beginning of the block group, and no other block in the same cluster. So relocation will preallocate a file extent for that block and dirty the first block. Then memory pressure forces the data reloc inode to be written back, before any other blocks are dirtied/allocated. Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated delalloc helper") changed the sequence of delalloc. Before that commit we always tried NOCOW first, so that dirtied block would be written back into the preallocated space, and appear as a regular extent. But with that commit, we always try inline first, and since compression is forced, we try compressing the first block, and then inline the compressed data, resulting in the above inlined file extent in the data reloc tree. Then the check in get_new_location() will check the file offset, without checking if the file extent is inlined or not, resulting in the above failure. [FIX] Do not allow compression for data reloc inodes. Since data reloc inode sizes are always block aligned, as long as we do not compress, @data_len will always be at least one block, and that will cause can_cow_file_range_inline() to return false, thus no inlined extent will be created. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-68165 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function. | ||||
| CVE-2026-68163 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_vma_mapped: fix device-private PMD handling Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") introduced the concept of device-private PMD entries, but did not correctly update the rmap walk code to account for them. As a result, when page_vma_mapped_walk() encounters device-private PMD entries, it takes no action other than to acquire the PMD lock and exit. However this is highly problematic for two reasons - firstly, device private entries possess a PFN so check_pmd() needs to be called to ensure an overlapping PFN range. Secondly, and more importantly, if PVMW_MIGRATION is set the caller assumes the returned entry is a migration entry, resulting in memory corruption when the caller tries to interpret the device private entry as such. In addition, commit 146287290023 ("mm/huge_memory: implement device-private THP splitting") allowed device private PMDs to be split like THP mappings, but again did not update this code path. As a result, we might race a PMD split prior to acquiring the PMD lock. This patch addresses all of these issues by invoking check_pmd(), ensuring PMVW_MIGRATION is not set and checks whether a split raced us we do for PMD THP and migration entries. Instead of checking for a subset of the cases after taking the pmd_lock(), put device-private along with pmd_trans_huge() and pmd_is_migration_entry(). Also remove thp_migration_supported() as it is already guarded by pmd_is_migration_entry(). [akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David] | ||||
| CVE-2026-68162 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardown window where auth_enable stayed writable after inet_ctl_sock_destroy() had released the control socket. Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after sctp_ctl_sock_init() succeeds, and unregister the sysctl table before destroying the control socket in sctp_ctrlsock_exit(). If sysctl registration fails after the control socket was created, destroy the control socket in the same init path. Make sctp_sysctl_net_unregister() tolerate a missing header and clear the saved pointer so init-error and exit paths can safely share the unregister helper. | ||||
| CVE-2026-68161 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | ||||