Export limit exceeded: 47253 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47253 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64225 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. | ||||
| CVE-2026-64283 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Treat memslot binding offset+size as unsigned values When binding a memslot to a guest_memfd file, treat the offset and size as unsigned values to fix a bug where the sum of the two can result in a false negative when checking for overflow against the size of the file. Passing unsigned values also avoids relying on somewhat obscure checks in other flows for safety, and tracks the offset and size as they are intended to be tracked, as unsigned values. On 64-bit kernels, the number of pages a memslot contains and thus the size (and offset) of its guest_memfd binding are unsigned 64-bit values. Taking the offset+size as an loff_t instead of a uoff_t inadvertently converts the unsigned value to a signed value if the offset and/or size is massive. Locally storing the offset and size as signed values is benign in and of itself (though even that is *extremely* difficult to discern), but operating on their sum is not. For the offset, KVM explicitly checks against a negative value, which might seem like a bug as KVM could incorrectly reject a legitimate binding, but that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value for its size, i.e. a would-be-negative offset is also greater than the maximum possible size of any guest_memfd file. Regarding the size, while KVM lacks an explicit check for a negative value, i.e. seemingly has a flawed overflow check, KVM restricts the number of pages in a single memslot to the largest positive signed 32-bit value: if (id < KVM_USER_MEM_SLOTS && (mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES) return -EINVAL; and so that maximum "size" will ever be is 0x7fffffff000. The sum of the two is, however, problematic. While the size is restricted by KVM's memslot logic, the offset is not, i.e. the offset is completely unchecked until the "offset + size > i_size_read(inode)" check. If the offset is the (nearly) largest possible _positive_ value, then adding size to the offset can result in a signed, negative 64-bit value. When compared against the size of the file (guaranteed to be positive), the negative sum is always smaller, and KVM incorrectly allows the absurd offset. Opportunistically add missing includes in kvm_mm.h (instead of relying on its parents). | ||||
| CVE-2026-64330 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes(). | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64349 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs | ||||
| CVE-2026-64384 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64412 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: module names must be null-terminated We need to explicitly check the length, else we may pass non-null terminated string to request_module(). | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||
| CVE-2026-64522 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. | ||||
| CVE-2026-64515 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64450 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. | ||||
| CVE-2026-64447 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths. | ||||
| CVE-2026-64444 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. | ||||
| CVE-2026-64441 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. | ||||
| CVE-2026-64440 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB write in HT_caps_handler() HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE. | ||||
| CVE-2026-64432 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns In the analysis pass of $LogFile journal replay, log_replay() copies LCNs from each action log record into an existing Dirty Page Table (DPT) entry without bounding the destination index. A crafted NTFS image with DPT entry lcns_follow=1 and an action log record with lcns_follow=2 produces a kernel slab out-of-bounds write at mount time: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mount Two attacker-controlled fields can drive j+i past the allocated page_lcns[] array: 1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow. 2. lrh->target_vcn may be smaller than dp->vcn, making the u64 subtraction wrap to a huge size_t. Validate target VCN delta and per-record LCN count against the DPT entry capacity, bail via the existing out: cleanup label with -EINVAL. This mirrors the bounds-check pattern added in commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in journal-replay file record check"). | ||||
| CVE-2026-64431 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access. An attacker can craft a malicious NTFS image with: - large index_block.usa_ofs offset, pointing outside the ntfs_record - index_block.usa_count = 0, causing integer underflow - or index_block.usa_count larger than actual number of sectors in the ntfs_record, causing out-of-bounds access KASAN reports describing the memory corruption: ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0 Read of size 2 at addr ffff8881586c9018 by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x19c/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x19c/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x19c/0x1d0 post_write_mst_fixup+0x19c/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0 Write of size 2 at addr ffff8881586c91fe by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x1aa/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x1aa/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x1aa/0x1d0 post_write_mst_fixup+0x1aa/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== Let's move the post_write_mst_fixup() call to ntfs_ib_write(). The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning. If the index_block contents is invalid, pre_write_mst_fixup() fails and ntfs_ib_write() returns early without calling post_write_mst_fixup() on bad index_block. | ||||