Export limit exceeded: 416358 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99123 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path. | ||||
| CVE-2026-99154 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. | ||||
| CVE-2026-99158 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place. | ||||
| CVE-2026-99169 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Fix mm reuse handling for FUT_OFF_MMSHARED A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) | ||||
| CVE-2026-99172 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it. | ||||
| CVE-2026-99180 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: unicode: free the map after a grace period generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: <TASK> utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone. | ||||
| CVE-2026-99182 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided. | ||||
| CVE-2026-99184 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: search every core slot when a core is removed rocket_remove() decrements rdev->num_cores for each core it removes, while find_core_for_dev() searches slots 0 to num_cores - 1. Unbinding the cores in the order they were bound therefore loses the last one: by the time it is removed the search range has already shrunk past its slot, so find_core_for_dev() returns -1 and rocket_remove() gives up without doing anything. num_cores never reaches zero, rocket_device_fini() never runs, and the file-scoped rdev keeps pointing at a device that is going away. Binding the cores again starts from that stale count, because rocket_probe() takes rdev->num_cores as the slot to fill. On an RK3588, which describes three cores, the second round lands on slots 1, 2 and 3 while rdev->cores was allocated with room for three: rocket fdab0000.npu: Rockchip NPU core 1 version: 1179210309 rocket fdac0000.npu: Rockchip NPU core 2 version: 1179210309 rocket fdad0000.npu: Rockchip NPU core 3 version: 1179210309 The write to rdev->cores[3] is past the end of the array. Nothing in tree reads the core array often enough to notice, so the overrun is silent today. It turned up while testing a devfreq series on top of this, where a worker walks every core a few times a second, and UBSAN caught the first bool it read out of the overrun entry: UBSAN: invalid-load in drivers/accel/rocket/rocket_devfreq.c:47:10 load of value 5 is not a valid value for type '_Bool' Workqueue: devfreq_wq devfreq_monitor Record how many slots were allocated and search all of them. Every core is then found on removal, num_cores reaches zero, the device is torn down and a later bind starts from a clean rdev. This does not make unbinding a single core out of several work. probe still takes num_cores as the slot to fill, so rebinding one core while its siblings stay bound would write over a slot that is already in use, and rocket_open() still reaches for cores[0] whether or not anything is there. Both of those want more thought than a fix should carry. Found by unbinding and rebinding all three cores on an Orange Pi 5 Plus. With this applied, 25 unbind/rebind rounds and 5 module unload/reload rounds run clean there: the cores land in slots 0, 1 and 2 every time, whichever order they are bound in, and the shared supply goes back to a single user after each round. | ||||
| CVE-2026-99185 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition in split transaction handling For a split transaction, either fw_core_handle_response() or split_transaction_timeout_callback() may manipulate the same transaction entry in the pending transaction list. The return value of timer_delete() is used to determine which function handles the entry. If the transaction is a split transaction and timer_delete() returns zero, the timeout callback may already be running. In this case, the response handler must leave the entry in the list for the timeout callback to remove. A previous code refactoring broke this behavior, introducing a race condition in which both functions could process the same transaction. This could lead to a use-after-free on the transaction initiator side. Fix the regression by ensuring that the response handler does not process the transaction when timer_delete() returns zero. The timeout callback is responsible for removing the entry from the pending transaction list. | ||||
| CVE-2026-99186 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx() Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made for_each_insn_prefix() declare its own loop counter named idx. get_seg_reg_override_idx() keeps its result in a local of the same name, so the assignments in the loop body now write the loop counter: - the function always returns INAT_SEG_REG_DEFAULT, so FS and GS overrides are ignored; - a CS override sets the counter to INAT_SEG_REG_CS (2), the increment makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again, so the loop never terminates. The UMIP emulation reaches this from the #GP handler for user space: an SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task spinning in the kernel, never returning to user space, with a SIGKILL that is never delivered. Any user can thus tie up CPUs until reboot. With an FS or GS prefix, the emulated result is written to the wrong address. Rename the internal macro iterator variable. [ Lukas' original patch renamed the use site, I changed it to rename the iterator in the macro instead, but left Lukas' commit message and authorship - Linus ] | ||||
| CVE-2026-99189 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irq_chained_handler() is called before the IRQ domain, the generic IRQ chip, and the port list entry are set up. If an interrupt arrives in that window: - mx3_gpio_irq_handler() calls generic_handle_domain_irq() with port->domain still NULL. - mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not been added to the list yet. Additionally, if any of the subsequent probe steps (gpio_generic_chip_init(), devm_gpiochip_add_data(), irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error paths never unregister the chained handler, leaving a dangling handler that points at freed memory. Move the handler installation after all its dependencies are ready and after list_add_tail(), so the handler is never live while the data structures it touches are incomplete, and is never installed if probe fails. | ||||
| CVE-2026-99191 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. | ||||
| CVE-2026-99192 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: unshare the skb before writing the control block bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. | ||||
| CVE-2026-99195 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethoc: move setting of netops to fix crash ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY, before netdev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99196 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: au1000: move setting of netops to fix crash au1000_probe() calls au1000_mii_probe(), which connects the PHY, before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99197 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mv643xx: move setting of netops to fix crash mv643xx_eth_probe() connects the PHY before dev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99107 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize(). | ||||
| CVE-2026-99148 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: keep the eviction fence until the last handle is closed amdgpu_gem_object_close() detaches the user queue eviction fence from the BO before it checks bo_va->ref_count, so closing any handle of a BO removes the fence, even when the file still has another handle to the BO and the bo_va with its GPU mappings stays. The BO can then be evicted without suspending the user queues of the file, which keep accessing it through mappings that are only marked for update. Seen on navi31 with a SDMA user queue: a BO opened twice in the same file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second handle is closed (traced attach/detach of the fence): attach bo=ffff8c78a6c84c00 GEM_CLOSE handle=7 detach bo=ffff8c78a6c84c00 while handle 6 and the mapping are still in use. Only detach the fence when the last reference to the bo_va goes away, matching amdgpu_gem_object_open(), which attaches it only when the bo_va is created. With this the fence stays until the file is closed. (cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a) | ||||
| CVE-2026-99162 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: shared: fix use-after-free bug when adding shared proxies The GPIO lookup table can stay alive for longer than the kobject whose name string's address we're assigning to lookup->dev_id. Fix a potential UAF by duplicating the string. | ||||
| CVE-2026-99126 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. | ||||