Export limit exceeded: 371938 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 371938 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371938 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40111 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix Use-after-free in validation Nodes stored in the validation duplicates hashtable come from an arena allocator that is cleared at the end of vmw_execbuf_process. All nodes are expected to be cleared in vmw_validation_drop_ht but this node escaped because its resource was destroyed prematurely. | ||||
| CVE-2025-40105 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfs: Don't leak disconnected dentries on umount When user calls open_by_handle_at() on some inode that is not cached, we will create disconnected dentry for it. If such dentry is a directory, exportfs_decode_fh_raw() will then try to connect this dentry to the dentry tree through reconnect_path(). It may happen for various reasons (such as corrupted fs or race with rename) that the call to lookup_one_unlocked() in reconnect_one() will fail to find the dentry we are trying to reconnect and instead create a new dentry under the parent. Now this dentry will not be marked as disconnected although the parent still may well be disconnected (at least in case this inconsistency happened because the fs is corrupted and .. doesn't point to the real parent directory). This creates inconsistency in disconnected flags but AFAICS it was mostly harmless. At least until commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon") which removed adding of most disconnected dentries to sb->s_anon list. Thus after this commit cleanup of disconnected dentries implicitely relies on the fact that dput() will immediately reclaim such dentries. However when some leaf dentry isn't marked as disconnected, as in the scenario described above, the reclaim doesn't happen and the dentries are "leaked". Memory reclaim can eventually reclaim them but otherwise they stay in memory and if umount comes first, we hit infamous "Busy inodes after unmount" bug. Make sure all dentries created under a disconnected parent are marked as disconnected as well. | ||||
| CVE-2025-40104 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix mailbox API compatibility by negotiating supported features There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. | ||||
| CVE-2025-40099 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: parse_dfs_referrals: prevent oob on malformed input Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS - reply smaller than sizeof(struct get_dfs_referral_rsp) - reply with number of referrals smaller than NumberOfReferrals in the header Processing of such replies will cause oob. Return -EINVAL error on such replies to prevent oob-s. | ||||
| CVE-2025-40096 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies When adding dependencies with drm_sched_job_add_dependency(), that function consumes the fence reference both on success and failure, so in the latter case the dma_fence_put() on the error path (xarray failed to expand) is a double free. Interestingly this bug appears to have been present ever since commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code back then looked like this: drm_sched_job_add_implicit_dependencies(): ... for (i = 0; i < fence_count; i++) { ret = drm_sched_job_add_dependency(job, fences[i]); if (ret) break; } for (; i < fence_count; i++) dma_fence_put(fences[i]); Which means for the failing 'i' the dma_fence_put was already a double free. Possibly there were no users at that time, or the test cases were insufficient to hit it. The bug was then only noticed and fixed after commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2") landed, with its fixup of commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies"). At that point it was a slightly different flavour of a double free, which commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") noticed and attempted to fix. But it only moved the double free from happening inside the drm_sched_job_add_dependency(), when releasing the reference not yet obtained, to the caller, when releasing the reference already released by the former in the failure case. As such it is not easy to identify the right target for the fixes tag so lets keep it simple and just continue the chain. While fixing we also improve the comment and explain the reason for taking the reference and not dropping it. | ||||
| CVE-2025-40095 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Refactor bind path to use __free() After an bind/unbind cycle, the rndis->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. | ||||
| CVE-2025-40094 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_acm: Refactor bind path to use __free() After an bind/unbind cycle, the acm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Call trace: usb_ep_free_request+0x2c/0xec gs_free_req+0x30/0x44 acm_bind+0x1b8/0x1f4 usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20 | ||||
| CVE-2025-40093 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Refactor bind path to use __free() After an bind/unbind cycle, the ecm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. | ||||
| CVE-2025-40092 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Refactor bind path to use __free() After an bind/unbind cycle, the ncm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Call trace: usb_ep_free_request+0x2c/0xec ncm_bind+0x39c/0x3dc usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20 | ||||
| CVE-2025-40090 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix recursive locking in RPC handle list access Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock. This causes hung connections / tasks when a client attempts to open a named pipe. Using Samba's rpcclient tool: $ rpcclient //192.168.1.254 -U user%password $ rpcclient $> srvinfo <connection hung here> Kernel side: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000 Workqueue: ksmbd-io handle_ksmbd_work Call trace: __schedule from schedule+0x3c/0x58 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8 rwsem_down_read_slowpath from down_read+0x28/0x30 down_read from ksmbd_session_rpc_method+0x18/0x3c ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68 ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228 ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8 create_smb2_pipe from smb2_open+0x10c/0x27ac smb2_open from handle_ksmbd_work+0x238/0x3dc handle_ksmbd_work from process_scheduled_works+0x160/0x25c process_scheduled_works from worker_thread+0x16c/0x1e8 worker_thread from kthread+0xa8/0xb8 kthread from ret_from_fork+0x14/0x38 Exception stack(0x8529ffb0 to 0x8529fff8) The task deadlocks because the lock is already held: ksmbd_session_rpc_open down_write(&sess->rpc_lock) ksmbd_rpc_open ksmbd_session_rpc_method down_read(&sess->rpc_lock) <-- deadlock Adjust ksmbd_session_rpc_method() callers to take the lock when necessary. | ||||
| CVE-2025-40088 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp() The hfsplus_strcasecmp() logic can trigger the issue: [ 117.317703][ T9855] ================================================================== [ 117.318353][ T9855] BUG: KASAN: slab-out-of-bounds in hfsplus_strcasecmp+0x1bc/0x490 [ 117.318991][ T9855] Read of size 2 at addr ffff88802160f40c by task repro/9855 [ 117.319577][ T9855] [ 117.319773][ T9855] CPU: 0 UID: 0 PID: 9855 Comm: repro Not tainted 6.17.0-rc6 #33 PREEMPT(full) [ 117.319780][ T9855] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 117.319783][ T9855] Call Trace: [ 117.319785][ T9855] <TASK> [ 117.319788][ T9855] dump_stack_lvl+0x1c1/0x2a0 [ 117.319795][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319803][ T9855] ? __pfx_dump_stack_lvl+0x10/0x10 [ 117.319808][ T9855] ? rcu_is_watching+0x15/0xb0 [ 117.319816][ T9855] ? lock_release+0x4b/0x3e0 [ 117.319821][ T9855] ? __kasan_check_byte+0x12/0x40 [ 117.319828][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319835][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319842][ T9855] print_report+0x17e/0x7e0 [ 117.319848][ T9855] ? __virt_addr_valid+0x1c8/0x5c0 [ 117.319855][ T9855] ? __virt_addr_valid+0x4a5/0x5c0 [ 117.319862][ T9855] ? __phys_addr+0xd3/0x180 [ 117.319869][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319876][ T9855] kasan_report+0x147/0x180 [ 117.319882][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490 [ 117.319891][ T9855] hfsplus_strcasecmp+0x1bc/0x490 [ 117.319900][ T9855] ? __pfx_hfsplus_cat_case_cmp_key+0x10/0x10 [ 117.319906][ T9855] hfs_find_rec_by_key+0xa9/0x1e0 [ 117.319913][ T9855] __hfsplus_brec_find+0x18e/0x470 [ 117.319920][ T9855] ? __pfx_hfsplus_bnode_find+0x10/0x10 [ 117.319926][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319933][ T9855] ? __pfx___hfsplus_brec_find+0x10/0x10 [ 117.319942][ T9855] hfsplus_brec_find+0x28f/0x510 [ 117.319949][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10 [ 117.319956][ T9855] ? __pfx_hfsplus_brec_find+0x10/0x10 [ 117.319963][ T9855] ? __kmalloc_noprof+0x2a9/0x510 [ 117.319969][ T9855] ? hfsplus_find_init+0x8c/0x1d0 [ 117.319976][ T9855] hfsplus_brec_read+0x2b/0x120 [ 117.319983][ T9855] hfsplus_lookup+0x2aa/0x890 [ 117.319990][ T9855] ? __pfx_hfsplus_lookup+0x10/0x10 [ 117.320003][ T9855] ? d_alloc_parallel+0x2f0/0x15e0 [ 117.320008][ T9855] ? __lock_acquire+0xaec/0xd80 [ 117.320013][ T9855] ? __pfx_d_alloc_parallel+0x10/0x10 [ 117.320019][ T9855] ? __raw_spin_lock_init+0x45/0x100 [ 117.320026][ T9855] ? __init_waitqueue_head+0xa9/0x150 [ 117.320034][ T9855] __lookup_slow+0x297/0x3d0 [ 117.320039][ T9855] ? __pfx___lookup_slow+0x10/0x10 [ 117.320045][ T9855] ? down_read+0x1ad/0x2e0 [ 117.320055][ T9855] lookup_slow+0x53/0x70 [ 117.320065][ T9855] walk_component+0x2f0/0x430 [ 117.320073][ T9855] path_lookupat+0x169/0x440 [ 117.320081][ T9855] filename_lookup+0x212/0x590 [ 117.320089][ T9855] ? __pfx_filename_lookup+0x10/0x10 [ 117.320098][ T9855] ? strncpy_from_user+0x150/0x290 [ 117.320105][ T9855] ? getname_flags+0x1e5/0x540 [ 117.320112][ T9855] user_path_at+0x3a/0x60 [ 117.320117][ T9855] __x64_sys_umount+0xee/0x160 [ 117.320123][ T9855] ? __pfx___x64_sys_umount+0x10/0x10 [ 117.320129][ T9855] ? do_syscall_64+0xb7/0x3a0 [ 117.320135][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320141][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320145][ T9855] do_syscall_64+0xf3/0x3a0 [ 117.320150][ T9855] ? exc_page_fault+0x9f/0xf0 [ 117.320154][ T9855] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 117.320158][ T9855] RIP: 0033:0x7f7dd7908b07 [ 117.320163][ T9855] Code: 23 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 08 [ 117.320167][ T9855] RSP: 002b:00007ffd5ebd9698 EFLAGS: 00000202 ---truncated--- | ||||
| CVE-2025-40087 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Define a proc_layoutcommit for the FlexFiles layout type Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT operation on a FlexFiles layout. | ||||
| CVE-2025-40084 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: transport_ipc: validate payload size before reading handle handle_response() dereferences the payload as a 4-byte handle without verifying that the declared payload size is at least 4 bytes. A malformed or truncated message from ksmbd.mountd can lead to a 4-byte read past the declared payload size. Validate the size before dereferencing. This is a minimal fix to guard the initial handle read. | ||||
| CVE-2025-40081 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: arm_spe: Prevent overflow in PERF_IDX2OFF() Cast nr_pages to unsigned long to avoid overflow when handling large AUX buffer sizes (>= 2 GiB). | ||||
| CVE-2025-40079 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Sign extend struct ops return values properly The ns_bpf_qdisc selftest triggers a kernel panic: Unable to handle kernel paging request at virtual address ffffffffa38dbf58 Current test_progs pgtable: 4K pagesize, 57-bit VAs, pgdp=0x00000001109cc000 [ffffffffa38dbf58] pgd=000000011fffd801, p4d=000000011fffd401, pud=000000011fffd001, pmd=0000000000000000 Oops [#1] Modules linked in: bpf_testmod(OE) xt_conntrack nls_iso8859_1 [...] [last unloaded: bpf_testmod(OE)] CPU: 1 UID: 0 PID: 23584 Comm: test_progs Tainted: G W OE 6.17.0-rc1-g2465bb83e0b4 #1 NONE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2024.01+dfsg-1ubuntu5.1 01/01/2024 epc : __qdisc_run+0x82/0x6f0 ra : __qdisc_run+0x6e/0x6f0 epc : ffffffff80bd5c7a ra : ffffffff80bd5c66 sp : ff2000000eecb550 gp : ffffffff82472098 tp : ff60000096895940 t0 : ffffffff8001f180 t1 : ffffffff801e1664 t2 : 0000000000000000 s0 : ff2000000eecb5d0 s1 : ff60000093a6a600 a0 : ffffffffa38dbee8 a1 : 0000000000000001 a2 : ff2000000eecb510 a3 : 0000000000000001 a4 : 0000000000000000 a5 : 0000000000000010 a6 : 0000000000000000 a7 : 0000000000735049 s2 : ffffffffa38dbee8 s3 : 0000000000000040 s4 : ff6000008bcda000 s5 : 0000000000000008 s6 : ff60000093a6a680 s7 : ff60000093a6a6f0 s8 : ff60000093a6a6ac s9 : ff60000093140000 s10: 0000000000000000 s11: ff2000000eecb9d0 t3 : 0000000000000000 t4 : 0000000000ff0000 t5 : 0000000000000000 t6 : ff60000093a6a8b6 status: 0000000200000120 badaddr: ffffffffa38dbf58 cause: 000000000000000d [<ffffffff80bd5c7a>] __qdisc_run+0x82/0x6f0 [<ffffffff80b6fe58>] __dev_queue_xmit+0x4c0/0x1128 [<ffffffff80b80ae0>] neigh_resolve_output+0xd0/0x170 [<ffffffff80d2daf6>] ip6_finish_output2+0x226/0x6c8 [<ffffffff80d31254>] ip6_finish_output+0x10c/0x2a0 [<ffffffff80d31446>] ip6_output+0x5e/0x178 [<ffffffff80d2e232>] ip6_xmit+0x29a/0x608 [<ffffffff80d6f4c6>] inet6_csk_xmit+0xe6/0x140 [<ffffffff80c985e4>] __tcp_transmit_skb+0x45c/0xaa8 [<ffffffff80c995fe>] tcp_connect+0x9ce/0xd10 [<ffffffff80d66524>] tcp_v6_connect+0x4ac/0x5e8 [<ffffffff80cc19b8>] __inet_stream_connect+0xd8/0x318 [<ffffffff80cc1c36>] inet_stream_connect+0x3e/0x68 [<ffffffff80b42b20>] __sys_connect_file+0x50/0x88 [<ffffffff80b42bee>] __sys_connect+0x96/0xc8 [<ffffffff80b42c40>] __riscv_sys_connect+0x20/0x30 [<ffffffff80e5bcae>] do_trap_ecall_u+0x256/0x378 [<ffffffff80e69af2>] handle_exception+0x14a/0x156 Code: 892a 0363 1205 489c 8bc1 c7e5 2d03 084a 2703 080a (2783) 0709 ---[ end trace 0000000000000000 ]--- The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer is treated as a 32bit value and sign extend to 64bit in epilogue. This behavior is right for most bpf prog types but wrong for struct ops which requires RISC-V ABI. So let's sign extend struct ops return values according to the function model and RISC-V ABI([0]). [0]: https://riscv.org/wp-content/uploads/2024/12/riscv-calling.pdf | ||||
| CVE-2025-40075 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: use dst_dev_net_rcu() Replace three dst_dev() with a lockdep enabled helper. | ||||
| CVE-2025-40074 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: start using dst_dev_rcu() Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF. Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(), ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu(). | ||||
| CVE-2025-40069 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix obj leak in VM_BIND error path If we fail a handle-lookup part way thru, we need to drop the already obtained obj references. Patchwork: https://patchwork.freedesktop.org/patch/669784/ | ||||
| CVE-2025-40068 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: Fix integer overflow in run_unpack() The MFT record relative to the file being opened contains its runlist, an array containing information about the file's location on the physical disk. Analysis of all Call Stack paths showed that the values of the runlist array, from which LCNs are calculated, are not validated before run_unpack function. The run_unpack function decodes the compressed runlist data format from MFT attributes (for example, $DATA), converting them into a runs_tree structure, which describes the mapping of virtual clusters (VCN) to logical clusters (LCN). The NTFS3 subsystem also has a shortcut for deleting files from MFT records - in this case, the RUN_DEALLOCATE command is sent to the run_unpack input, and the function logic provides that all data transferred to the runlist about file or directory is deleted without creating a runs_tree structure. Substituting the runlist in the $DATA attribute of the MFT record for an arbitrary file can lead either to access to arbitrary data on the disk bypassing access checks to them (since the inode access check occurs above) or to destruction of arbitrary data on the disk. Add overflow check for addition operation. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40067 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist Index allocation requires at least one bit in the $BITMAP attribute to track usage of index entries. If the bitmap is empty while index blocks are already present, this reflects on-disk corruption. syzbot triggered this condition using a malformed NTFS image. During a rename() operation involving a long filename (which spans multiple index entries), the empty bitmap allowed the name to be added without valid tracking. Subsequent deletion of the original entry failed with -ENOENT, due to unexpected index state. Reject such cases by verifying that the bitmap is not empty when index blocks exist. | ||||