Export limit exceeded: 398039 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398039 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97931 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades. | ||||
| CVE-2026-97930 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout. | ||||
| CVE-2026-97928 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) | ||||
| CVE-2026-97927 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb->s_root before it loaded the cylinder group structures for a writable mount: sb->s_root = d_make_root(inode); ... if (!sb_rdonly(sb)) if (!ufs_read_cylinder_structures(sb)) goto failed; When ufs_read_cylinder_structures() failed, the error path freed the in-core superblock information and set sb->s_fs_info to NULL while sb->s_root stayed installed. get_tree_bdev() then reached deactivate_locked_super(), and because s_root was present, generic_shutdown_super() called sync_filesystem() and the put_super operation. Both dereference UFS_SB(sb), which is now NULL, so a mount that fails only while reading the cylinder groups oopses during teardown. A crafted image whose first cylinder group cannot be read reaches this path. Load the cylinder group metadata first and create the root dentry last, so the superblock is published to the VFS only once it is fully set up. ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the super_block and do not use the root inode, so the reordering is safe. | ||||
| CVE-2026-97926 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose rotors fall outside the group, before the metadata is cached. Valid filesystems keep cg_cgx equal to the group number and the rotors within the group, so only malformed images are rejected. | ||||
| CVE-2026-97925 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it. | ||||
| CVE-2026-97922 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram var refs regardless of how often they are referenced Using the same variable three or more times in one hist trigger leaks the variable reference and its strings when the trigger is removed. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made a trigger's var_refs[] array the only owner of a var ref: destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field expressions never destroy one. One entry, freed once, no count needed. commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same var as value") then made repeated references share one object and added a count of them. Only the increment side exists, since those expressions still return early and never drop a reference, so __destroy_hist_field() sees how many references were created rather than how many are left. It frees when the decremented count is 0 or 1, so two references work and three or more leak. Sharing kept one array entry per object, and create_var_ref() searches and appends within a single trigger, so nothing outside it holds the object. Removing a trigger whose variables are still referenced is already refused by check_var_refs() with -EBUSY. Drop the count and free unconditionally. | ||||
| CVE-2026-97921 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag. | ||||
| CVE-2026-97920 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-97913 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure cmd stream ends with a stop op While the QSIZE register setting should prevent an out of bounds access of the command stream, it is not clear whether the h/w generates an interrupt in this case as is required (to prevent a timeout). As a stop op is expected end of the command stream, let's just ensure it is present. A stop op in the middle of the command stream also makes no sense. | ||||
| CVE-2026-97912 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0. | ||||
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97902 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched. | ||||