Export limit exceeded: 371926 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 371926 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371926 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39970 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix input validation logic for action_meta Fix condition to check 'greater or equal' to prevent OOB dereference. | ||||
| CVE-2025-39969 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix validation of VF state in get resources VF state I40E_VF_STATE_ACTIVE is not the only state in which VF is actually active so it should not be used to determine if a VF is allowed to obtain resources. Use I40E_VF_STATE_RESOURCES_LOADED that is set only in i40e_vc_get_vf_resources_msg() and cleared during reset. | ||||
| CVE-2025-39968 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add max boundary check for VF filters There is no check for max filters that VF can request. Add it. | ||||
| CVE-2025-39966 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix race during abort for file descriptors fput() doesn't actually call file_operations release() synchronously, it puts the file on a work queue and it will be released eventually. This is normally fine, except for iommufd the file and the iommufd_object are tied to gether. The file has the object as it's private_data and holds a users refcount, while the object is expected to remain alive as long as the file is. When the allocation of a new object aborts before installing the file it will fput() the file and then go on to immediately kfree() the obj. This causes a UAF once the workqueue completes the fput() and tries to decrement the users refcount. Fix this by putting the core code in charge of the file lifetime, and call __fput_sync() during abort to ensure that release() is called before kfree. __fput_sync() is a bit too tricky to open code in all the object implementations. Instead the objects tell the core code where the file pointer is and the core will take care of the life cycle. If the object is successfully allocated then the file will hold a users refcount and the iommufd_object cannot be destroyed. It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an issue because close() is already using a synchronous version of fput(). The UAF looks like this: BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164 CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline] __refcount_dec include/linux/refcount.h:455 [inline] refcount_dec include/linux/refcount.h:476 [inline] iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 __fput+0x402/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2025-39965 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_alloc_spi shouldn't use 0 as SPI x->id.spi == 0 means "no SPI assigned", but since commit 94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states and add them to the byspi list with this value. __xfrm_state_delete doesn't remove those states from the byspi list, since they shouldn't be there, and this shows up as a UAF the next time we go through the byspi list. | ||||
| CVE-2025-39964 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg Issuing two writes to the same af_alg socket is bogus as the data will be interleaved in an unpredictable fashion. Furthermore, concurrent writes may create inconsistencies in the internal socket state. Disallow this by adding a new ctx->write field that indiciates exclusive ownership for writing. | ||||
| CVE-2025-39962 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements. | ||||
| CVE-2025-39961 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU driver increases page table level. But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads pgtable->[root/mode] without lock. So its possible that in exteme corner case, when increase_address_space() is updating pgtable->[root/mode], fetch_pte() reads wrong page table level (pgtable->mode). It does compare the value with level encoded in page table and returns NULL. This will result is iommu_unmap ops to fail and upper layer may retry/log WARN_ON. CPU 0 CPU 1 ------ ------ map pages unmap pages alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte() pgtable->root = pte (new root value) READ pgtable->[mode/root] Reads new root, old mode Updates mode (pgtable->mode += 1) Since Page table level updates are infrequent and already synchronized with a spinlock, implement seqcount to enable lock-free read operations on the read path. | ||||
| CVE-2025-39960 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio() | ||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | ||||
| CVE-2025-39956 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: igc: don't fail igc_probe() on LED setup error When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: <TASK> igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind | ||||
| CVE-2025-39952 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: avoid buffer overflow in WID string configuration Fix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537) This patch introduces size check before accessing the memory buffer. The checks are base on the WID type of received data from the firmware. For WID string configuration, the size limit is determined by individual element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field of 'struct wilc_cfg_str'. | ||||
| CVE-2025-39949 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: qed: Don't collect too many protection override GRC elements In the protection override dump path, the firmware can return far too many GRC elements, resulting in attempting to write past the end of the previously-kmalloc'ed dump buffer. This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESS where "ADDRESS" is just past the end of the protection override dump buffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf and the size of the buffer is buf_size in the same data structure. The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783 or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663 Resolve this by clamping the firmware's return value to the maximum number of legal elements the firmware should return. | ||||
| CVE-2025-39948 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix Rx page leak on multi-buffer frames The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each buffer in the current frame. This function was introduced as part of handling multi-buffer XDP support in the ice driver. It works by iterating over the buffers from first_desc up to 1 plus the total number of fragments in the frame, cached from before the XDP program was executed. If the hardware posts a descriptor with a size of 0, the logic used in ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't call ice_put_rx_buf(). Because we don't call ice_put_rx_buf(), we don't attempt to re-use the page or free it. This leaves a stale page in the ring, as we don't increment next_to_alloc. The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented properly, and that it always points to a buffer with a NULL page. Since this function doesn't check, it will happily recycle a page over the top of the next_to_alloc buffer, losing track of the old page. Note that this leak only occurs for multi-buffer frames. The ice_put_rx_mbuf() function always handles at least one buffer, so a single-buffer frame will always get handled correctly. It is not clear precisely why the hardware hands us descriptors with a size of 0 sometimes, but it happens somewhat regularly with "jumbo frames" used by 9K MTU. To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on all buffers between first_desc and next_to_clean. Borrow the logic of a similar function in i40e used for this same purpose. Use the same logic also in ice_get_pgcnts(). Instead of iterating over just the number of fragments, use a loop which iterates until the current index reaches to the next_to_clean element just past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does call ice_put_rx_buf() on the last buffer of the frame indicating the end of packet. For non-linear (multi-buffer) frames, we need to take care when adjusting the pagecnt_bias. An XDP program might release fragments from the tail of the frame, in which case that fragment page is already released. Only update the pagecnt_bias for the first descriptor and fragments still remaining post-XDP program. Take care to only access the shared info for fragmented buffers, as this avoids a significant cache miss. The xdp_xmit value only needs to be updated if an XDP program is run, and only once per packet. Drop the xdp_xmit pointer argument from ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function directly. This avoids needing to pass the argument and avoids an extra bit-wise OR for each buffer in the frame. Move the increment of the ntc local variable to ensure its updated *before* all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic requires the index of the element just after the current frame. Now that we use an index pointer in the ring to identify the packet, we no longer need to track or cache the number of fragments in the rx_ring. | ||||
| CVE-2025-39943 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer If data_offset and data_length of smb_direct_data_transfer struct are invalid, out of bounds issue could happen. This patch validate data_offset and data_length field in recv_done. | ||||
| CVE-2025-39942 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size This is inspired by the check for data_offset + data_length. | ||||
| CVE-2025-39941 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix slot write race condition Parallel concurrent writes to the same zram index result in leaked zsmalloc handles. Schematically we can have something like this: CPU0 CPU1 zram_slot_lock() zs_free(handle) zram_slot_lock() zram_slot_lock() zs_free(handle) zram_slot_lock() compress compress handle = zs_malloc() handle = zs_malloc() zram_slot_lock zram_set_handle(handle) zram_slot_lock zram_slot_lock zram_set_handle(handle) zram_slot_lock Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done too early. In fact, we need to reset zram entry right before we set its new handle, all under the same slot lock scope. | ||||
| CVE-2025-39933 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: let recv_done verify data_offset, data_length and remaining_data_length This is inspired by the related server fixes. | ||||
| CVE-2025-39932 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work) In smbd_destroy() we may destroy the memory so we better wait until post_send_credits_work is no longer pending and will never be started again. I actually just hit the case using rxe: WARNING: CPU: 0 PID: 138 at drivers/infiniband/sw/rxe/rxe_verbs.c:1032 rxe_post_recv+0x1ee/0x480 [rdma_rxe] ... [ 5305.686979] [ T138] smbd_post_recv+0x445/0xc10 [cifs] [ 5305.687135] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687149] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687185] [ T138] ? __pfx_smbd_post_recv+0x10/0x10 [cifs] [ 5305.687329] [ T138] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 5305.687356] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687368] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687378] [ T138] ? _raw_spin_unlock_irqrestore+0x11/0x60 [ 5305.687389] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687399] [ T138] ? get_receive_buffer+0x168/0x210 [cifs] [ 5305.687555] [ T138] smbd_post_send_credits+0x382/0x4b0 [cifs] [ 5305.687701] [ T138] ? __pfx_smbd_post_send_credits+0x10/0x10 [cifs] [ 5305.687855] [ T138] ? __pfx___schedule+0x10/0x10 [ 5305.687865] [ T138] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 5305.687875] [ T138] ? queue_delayed_work_on+0x8e/0xa0 [ 5305.687889] [ T138] process_one_work+0x629/0xf80 [ 5305.687908] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687917] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687933] [ T138] worker_thread+0x87f/0x1570 ... It means rxe_post_recv was called after rdma_destroy_qp(). This happened because put_receive_buffer() was triggered by ib_drain_qp() and called: queue_work(info->workqueue, &info->post_send_credits_work); | ||||
| CVE-2025-39931 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop. | ||||