Export limit exceeded: 23993 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23993 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64296 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer. | ||||
| CVE-2026-64277 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting. | ||||
| CVE-2026-64276 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. | ||||
| CVE-2026-64247 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Failure to check the bounds of the VP ID leads to an out-of-bounds read when testing the sparse bank, and super strictly speaking could lead to KVM performing an unnecessary TLB flush for an L2 vCPU. ================================================================== BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm] Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802 CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5d0 kasan_report+0xb4/0xe0 kasan_check_range+0x35/0x1b0 hv_is_vp_in_sparse_set+0x85/0x100 [kvm] kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm] kvm_hv_hypercall+0xe6b/0x1e60 [kvm] vmx_handle_exit+0x485/0x1b60 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm] kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0xb9/0xcf0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f0e62d1a9bf </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f flags: 0x4000000000000000(zone=1) raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000 raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Opportunistically add a compile time assertion to ensure the maximum number of sparse banks exactly matches the number of possible bits in the passed in mask. [sean: add KASAN splat, drop comment, add assert, massage changelog] | ||||
| CVE-2026-64223 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. | ||||
| CVE-2026-64219 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) | ||||
| CVE-2026-64237 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | ||||
| CVE-2026-13820 | 1 Google | 1 Chrome | 2026-07-27 | 6.5 Medium |
| Out of bounds read in Skia in Google Chrome on Mac prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-57869 | 1 Microrealestate | 1 Microrealestate | 2026-07-26 | N/A |
| Broken object-level access controls and the use of a deterministic pattern during random ID generation in MicroRealEstate allows attackers to access documents uploaded by landlords or tenants without authorization. This issue affects MicroRealEstate: through 1.0.0-alpha3. | ||||
| CVE-2026-15123 | 1 Google | 1 Chrome | 2026-07-26 | 8.8 High |
| Inappropriate implementation in DOM in Google Chrome prior to 150.0.7871.115 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-51602 | 1 Tenda | 1 Cp3 | 2026-07-26 | 7.5 High |
| A stack-based buffer overflow vulnerability in the RTSP service of Tenda CP3 V3.0 (firmware V31.1.9.91) allows an unauthenticated remote attacker to cause a denial of service via a crafted SETUP request. The RTSP service's second-stage URL routing parser fails to validate the length of the URL field in the first SETUP request. By supplying a URL consisting of exactly four consecutive repetitions of a valid RTSP URL, an attacker can bypass first-stage format validation and trigger a stack buffer overflow, causing an immediate crash of the RTSP service process and rendering the device inaccessible to all clients on the local network. | ||||
| CVE-2026-58303 | 1 Samsung Open Source | 1 Escargot | 2026-07-26 | 6.1 Medium |
| Stack-based buffer overflow vulnerability in Samsung Open Source Escargot allows Overflow Buffers. This issue affects Escargot: before b30b63fc63b403907d8137da1c65aaa4521fe74e. | ||||
| CVE-2026-58306 | 1 Samsung Open Source | 1 Escargot | 2026-07-26 | 6.1 Medium |
| Heap-based buffer overflow vulnerability in Samsung Open Source Escargot allows Overflow Buffers. This issue affects Escargot: before ef525f337fafddecde77a3c426212a84bb20cb98. | ||||
| CVE-2026-51541 | 1 Eipstackgroup | 1 Opener | 2026-07-26 | 9.1 Critical |
| OpENer 2.3.0 (commit 76b95cf) has an out-of-bounds read issue in CIP message parsing when handling malformed explicit requests with a forged EPath size. An attacker can send a valid ENIP SendRRData frame carrying a very short CIP payload whose path_size field claims that many more path words are present than are actually available. Because the parser trusts the attacker-controlled path_size and continues decoding path segments without a remaining-length boundary, it reads beyond the end of the stack receive buffer. | ||||
| CVE-2026-63893 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject u32 wrap in tb_property_entry_valid() entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum is rejected. | ||||
| CVE-2026-63915 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header. | ||||
| CVE-2026-63920 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options. | ||||
| CVE-2026-63932 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf. | ||||
| CVE-2026-63938 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Check PSC request indices against the actual size of the buffer When processing Page State Change (PSC) requests, validate the PSC buffer against the effective size of the scratch area, which could be less than the maximum size if the guest provided a pointer that isn't exactly at the start of the GHCB shared buffer. | ||||
| CVE-2026-16419 | 1 Google | 1 Chrome | 2026-07-26 | 9.6 Critical |
| Out of bounds read and write in ANGLE in Google Chrome on Android prior to 150.0.7871.182 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||