Export limit exceeded: 20882 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20882 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64486 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64474 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time, looping to skip optional states the device does not support until *next_fsm is supported. A blocked transition is encoded as VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL. The skip loop does not account for the ERROR sentinel. state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is ERROR, so once *next_fsm becomes ERROR the loop condition stays true and *next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a precopy-capable device, causing the loop to spin forever while holding the driver state mutex. This can result in a soft lockup, and a panic with softlockup_panic set. Terminate the skip loop on the ERROR sentinel so a blocked transition falls through to the existing return and reports -EINVAL. | ||||
| CVE-2026-64464 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. Free the pages array after sg_alloc_table_from_pages() succeeds. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction. | ||||
| CVE-2026-64457 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths. | ||||
| CVE-2026-64421 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid. | ||||
| CVE-2026-64371 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock | ||||
| CVE-2026-64360 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. | ||||
| CVE-2026-64348 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-64329 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis. | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64302 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix freeing of PMD-sized vmemmap pages Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from freeing non-boot page tables through __free_pages() to pagetable_free(). However, the function is also called to free vmemmap pages. Given that vmemmap pages are not page tables, already the page_ptdesc(page) is wrong. But worse, pagetable_free() calls: __free_pages(page, compound_order(page)); Since vmemmap pages are not compound pages (see vmemmap_alloc_block()) -- except for HVO, which doesn't apply here -- only first page of a PMD-sized vmemmap page is freed, leaking the other ones. Fix it by properly decoupling pagetable and vmemmap freeing. free_pagetable() no longer has to mess with SECTION_INFO, as only the vmemmap is marked like that in register_page_bootmem_memmap(). The indentation in remove_pmd_table() is messed up. Fix that while touching it. Bootmem info handling will soon be fixed up. For now, handle it similar to free_pagetable(), just avoiding the ifdef. [ dhansen: changelog munging. More imperative voice ] | ||||
| CVE-2026-64275 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - prevent division by zero and arithmetic underflow The Elan I2C touchpad driver queries the device for its physical dimensions and trace counts to calculate the device resolution and width. However, if the device firmware or device tree provides invalid zero values for x_traces or y_traces, it results in a fatal division-by-zero exception leading to a kernel panic during device probe. Add checks to ensure these parameters are non-zero before performing the division. If invalid trace values are detected, fall back to a safe default of 1. Additionally, prevent an arithmetic underflow in the touch reporting logic. Previously, if the calculated or fallback width was smaller than ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a massive unsigned integer being reported to userspace. Clamp the adjusted width to a minimum of 0 to safely handle small physical dimensions and fallback scenarios. Completing the probe with safe fallback values ensures the sysfs nodes are created, keeping the firmware update path intact so a recovery firmware can be flashed to the device. | ||||
| CVE-2026-64273 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. | ||||
| CVE-2026-63870 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit() The aoe driver (or similar) generates a non-IPv6 packet (e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit() on a 6LoWPAN interface (configured by the user or test case). Since the packet is not IPv6, the 6LoWPAN header_ops->create function (lowpan_header_create or header_create) returns early without initializing the lowpan_addr_info structure in the skb headroom. In the transmit function (lowpan_xmit), the driver calls lowpan_header (or setup_header) which unconditionally copies and uses the lowpan_addr_info from the headroom, which contains uninitialized data. Fix this by dropping non IPv6 packets. A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). | ||||
| CVE-2026-63887 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) | ||||
| CVE-2026-63897 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). | ||||
| CVE-2026-63910 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: fix UAF in dma_buf_fd() tracepoint Once FD_ADD() returns, the fd is live in the file descriptor table and a thread sharing that table can close() it before DMA_BUF_TRACE() runs. The close drops the last reference, __fput() frees the dma_buf, and the tracepoint then dereferences dmabuf to take dmabuf->name_lock -- slab-use-after-free. Split FD_ADD() back into get_unused_fd_flags() + fd_install() and emit the tracepoint between them. While the fdtable slot is reserved with a NULL file pointer, a racing close() returns -EBADF without entering __fput(), so the dma_buf stays alive across the trace. Same approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put() tracepoint"). This undoes the FD_ADD() conversion done in commit 34dfce523c90 ("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to hook the tracepoint safely. | ||||
| CVE-2026-63929 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled. | ||||
| CVE-2026-63934 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. | ||||