Export limit exceeded: 395646 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395646 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93048 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2), since those special offsets rely on cur_offset tracking the previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them") later added MTDPART_OFS_RETAIN (-3) for the static partition table path without updating mtd_add_partition() to also reject this value. With offset=-3 passed via BLKPG, the RETAIN size calculation in allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD = parent_size + 3). If the underflow result does not appear to leave enough space, allocate_partition() jumps to out_register via goto, skipping erasesize initialization. This results in erasesize=0, which triggers: WARN_ON((!mtd->erasesize || !master->_erase) && !(mtd->flags & MTD_NO_ERASE)) in add_mtd_device(). If the underflow result appears to leave enough space, a bogus partition size is calculated, but the "out of reach" sanity check catches the invalid offset and creates a disabled empty partition (offset=0, size=0) instead of returning an error. Fix this by adding MTDPART_OFS_RETAIN to the rejection list in mtd_add_partition(), consistent with the existing handling of APPEND and NXTBLK. | ||||
| CVE-2026-92524 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc() When its_irq_gic_domain_alloc() fails, the following its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the corresponding interrupt, which leaks the resource. Invoke its_vpe_teardown() in the error handling path to avoid the leak. [ tglx: Massaged change log ] | ||||
| CVE-2026-92476 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requests the device IRQ before initializing irq_completion. Once the handler is registered it can run immediately, and ocs_aes_irq_handler() unconditionally calls complete(). An interrupt in this window would therefore use an uninitialized completion. Initialize the completion before requesting the IRQ, as the sibling OCS HCU and ECC drivers already do. | ||||
| CVE-2026-90418 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(), which copies dirty DAT file folios/pages to its shadow page cache. The BUG occurs when a retrieved dirty folio/page unexpectedly loses its 'dirty' status. This issue arises because, since the commit referenced below, the 'dirty' flag of a folio/page can be cleared asynchronously after the filesystem detects metadata corruption and transitions to read-only mode. Resolve the issue by returning an -EROFS error if the filesystem has transitioned to read-only mode. Also change the behavior to issue a kernel warning only once instead of triggering a kernel BUG when this unexpected 'dirty' state is detected while the filesystem is not in read-only mode. | ||||
| CVE-2026-90375 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop the reassignment and account on the wcid used for transmission. This also records the actual wcid in the queue entry. | ||||
| CVE-2026-90342 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock deadlock on arena lock failure Reported by the Sashiko AI review. arena_vm_fault() returns VM_FAULT_RETRY when it can't take arena->spinlock, but it never took mmap_lock. The fault path assumes a VM_FAULT_RETRY handler already dropped mmap_lock and re-takes it on the retry, so mmap_lock gets taken twice and can deadlock: do_user_addr_fault() { fault = handle_mm_fault(...); // calls arena_vm_fault() if (fault & VM_FAULT_RETRY) goto retry; // re-locks mmap_lock mmap_read_unlock(mm); } Return VM_FAULT_SIGBUS instead, for two reasons: 1. We could keep VM_FAULT_RETRY, but then we'd have to drop the fault lock first and cap the retry ourselves, the way __folio_lock_or_retry() does. 2. A failed raw_res_spin_lock_irqsave() already means a possible deadlock was detected, so retrying just hits the same lock again. So returning VM_FAULT_RETRY here is overkill. | ||||
| CVE-2026-90303 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Keep everything unchanged for kernel faults, because the kernel is already in the "oops" state, acquiring a lock may risk a deadlock. | ||||
| CVE-2026-90267 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page. | ||||
| CVE-2026-90264 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:264! Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0 Call Trace: <TASK> cow_file_range+0x744/0x12a0 fallback_to_cow+0x5ea/0xa00 run_delalloc_nocow+0x110c/0x17a0 btrfs_run_delalloc_range+0xbe4/0x1c20 writepage_delalloc+0x104d/0x1ba0 btrfs_writepages+0x1667/0x28b0 do_writepages+0x338/0x560 filemap_fdatawrite_range+0x1f2/0x300 btrfs_fdatawrite_range+0x54/0xf0 btrfs_direct_write+0x6a0/0xc30 btrfs_do_write_iter+0x329/0x790 do_iter_readv_writev+0x624/0x8d0 vfs_writev+0x34c/0x990 __se_sys_pwritev2+0x17a/0x2a0 do_syscall_64+0x174/0x580 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- [CAUSE] Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback for append direct writes"), if the direct IO finished short, we will revert the isize back to the original one, so that append writes can be respected during the buffered fallback. Normally we rely on lock_and_cleanup_extent_if_need() function during buffered writeback to wait for any existing ordered extents. But that ordered extent waiting only happens if the start_pos is inside the isize. Since we have reverted the isize during failed direct IO, we will not wait for any ordered extents. This means we can have a race where the direct IO OE is still in the tree, finished but not yet removed, then we're inserting the OE for the buffered write, causing the above crash. [FIX] Make the OE wait to be unconditional, to handle the reverted isize situation. And since lock_and_cleanup_extent_if_need() now either lock the extents or return -EAGAIN, also remove the branches that handles no-extent-locked cases, and rename it to remove the "_if_need" suffix. The following micro benchmark shows the runtime difference for btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload, all values are the average runtime in nano seconds. function runtime | before | after -----------------------------------+-------------+--------------- lock_and_cleanup_extent_if_need() | 58.2 | 183.0 btrfs_buffered_write() | 2115.6 | 2973.3 The overall runtime of btrfs_buffered_write() is still pretty tiny (still less than 3 micro seconds), I'd say the extra cost is still acceptable. An alternative to fix this problem is to wait ordered extents during iomap_end() where the isize revert is done. But that solution will break nowait requirement, as if a nowait direct IO finished short, we have to wait for the OEs unconditionally or the next append buffered IO can still hit the same problem. So here we have to move the wait cost to buffered write, but at least the code is slightly more streamline. | ||||
| CVE-2026-90233 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA pools are created lazily from nvme_init_hctx_common() once the admin tag set is allocated, but they are only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any probe failure after the admin tag set has been allocated unwinds through the out_disable label and nvme_pci_free_ctrl(), neither of which releases the pools, leaking the dma_pool objects. Release the descriptor pools in the out_disable error path. It must not be added to nvme_pci_free_ctrl(), as that would double-free against nvme_remove() on the normal teardown path. | ||||
| CVE-2026-90222 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: hold a reference to the request skb during send_frame __pn533_send_async() publishes the command and then calls dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame can be matched to this command: the I2C threaded IRQ runs pn533_recv_frame(), which queues cmd_complete_work, and pn533_send_async_complete() frees cmd->req with consume_skb(). On the I2C transport, pn533_i2c_send_frame() still dereferences the same skb after i2c_master_send() returns, so a completion that races the send can free the skb while the transport is still using it. The request skb is owned by the command object and may be freed by command completion at any time after dev->cmd is published, so the transport send path must not assume it stays alive. Hold a temporary reference to the request skb across the send_frame() call so the transport always sees a live skb even if completion races the send. Add a pn533_send_cmd_frame() helper and use it from all three send paths. | ||||
| CVE-2026-9314 | 2026-09-17 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-90201 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race This bug was discovered while testing the hns3 driver under channel reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on arm64. The race is intermittently triggered when page_pool_destroy() runs page_pool_scrub() concurrently with page return via page_pool_put_netmem() on a different CPU. A WARN in page_pool_clear_pp_info() surfaced the dangling DMA index bits left by the cmpxchg loser, which led to the investigation. page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no page ref held. __page_pool_release_netmem_dma() currently reads and writes netmem fields (dma_addr, DMA index bits in pp_magic) after xa_cmpxchg() returns. The unref path calls put_page() unconditionally regardless of the cmpxchg outcome; when it loses the cmpxchg, it still frees the page before the scrub winner finishes these netmem accesses, so scrub touches a freed page -- a Use-After-Free. Fix this by splitting the DMA release into two functions: 1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(), does the cmpxchg to remove the DMA mapping, and calls dma_unmap on the cached address. It never touches netmem fields after the cmpxchg, making it safe for the scrub path which holds no page ref. 2. __page_pool_release_netmem_dma() wraps the above and additionally clears dma_addr and DMA index bits in netmem fields. This is safe only when the caller holds a page ref, so it is used by the return path (page_pool_return_netmem). The scrub path calls __page_pool_unmap_netmem_dma() directly; the return path calls __page_pool_release_netmem_dma(). | ||||
| CVE-2026-90165 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger() See the procedure below: ksmbd_launch_ksmbd_durable_scavenger durable_scavenger_running = true server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR() server_ctrl_handle_reset ksmbd_stop_durable_scavenger kthread_stop(server_conf.dh_task) // invalid pointer | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90139 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function. | ||||
| CVE-2026-90128 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path. | ||||
| CVE-2026-90126 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own). | ||||
| CVE-2026-90122 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||