Export limit exceeded: 373862 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373862 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16242 | 1 Redhat | 10 Acm, Advanced Cluster Management For Kubernetes, Logging and 7 more | 2026-08-06 | 9.4 Critical |
| A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic. | ||||
| CVE-2026-64601 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission In capture_urb_complete(), usb_anchor_urb() is called on every completion callback, but the URB is already anchored from the initial submission in tascam_trigger_start(). Each redundant call corrupts the anchor's doubly-linked list and inflates the URB refcount. When usb_kill_anchored_urbs() traverses the list during stream stop / suspend / disconnect, the corrupted list leads to use-after-free. Remove the redundant usb_anchor_urb() from the resubmit path. | ||||
| CVE-2026-64588 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix data races on ring->ready On weakly-ordered architectures, the store to fiq->ops can be reordered past the store to ring->ready, allowing a CPU that sees ring->ready == true via fuse_uring_ready() to dispatch requests through a stale fiq->ops pointer. Upgrade the store to smp_store_release() and the load in fuse_uring_ready() to smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...) is visible to any CPU that observes ring->ready == true. Additionally, fuse_uring_do_register() publishes ring->ready with WRITE_ONCE() but the fast-path check reads it with a plain load. This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in READ_ONCE() to mark it without adding unnecessary ordering. Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to prevent the compiler from reloading it between the NULL check and the dereference. | ||||
| CVE-2026-64598 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: Fix error code in smb2_aead_req_alloc() The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work. We would have to do something similar to the previous line where it's cast to int and then long. However, it's simpler to store the return in an int ret variable. This bug would eventually result in a crash when dereference the invalid error pointer. | ||||
| CVE-2026-64602 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: spear: Initialize completion before requesting IRQ In the report from Jaeyoung Chung: "spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in spear_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ spear_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). | ||||
| CVE-2026-64604 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in guest mode so that a future change can have update CR8 intercepts during vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion. ------------[ cut here ]------------ debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count)) WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879 WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879 Modules linked in: CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline] RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879 Call Trace: <TASK> apic_update_ppr arch/x86/kvm/lapic.c:984 [inline] kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023 kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986 kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847 kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201 kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> No functional change intended. | ||||
| CVE-2026-51992 | 1 Clickhouse | 1 Clickhouse | 2026-08-06 | 9.1 Critical |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. ClickHouse's PostgreSQL integration intentionally allows users with valid PostgreSQL credentials to execute queries against a remote PostgreSQL server. No vulnerability in ClickHouse is exploited; code execution occurs on the downstream PostgreSQL server using credentials explicitly provided by the user with specific pg_execute_server_program permission, exploiting a feature that was wrongly reported as CVE-2019-9193 in PostgreSQL (https://www.postgresql.org/about/news/cve-2019-9193-not-a-security-vulnerability-1935/). | ||||
| CVE-2026-64585 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: kill anchored URBs before freeing netdevs esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reorder the teardown so the anchored URBs are killed before the netdevs are freed, matching other CAN/USB drivers in the same directory such as ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then free: unregister the netdevs first (which stops their TX queues), call unlink_all_urbs(dev) once, then free the netdevs. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-64592 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Unconditionally sfence.vma for spurious fault Svvptc does not guarantee that it's safe to just return here. Since we have already cleared our bit, if, theoretically, the bounded timeframe for the accessed page to become valid still hasn't happened after sret, we could fault again and actually crash. Hopefully, these spurious faults should be rare enough that this is an acceptable slowdown. | ||||
| CVE-2026-64593 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not trim a device which is not writeable [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]--- Also the reporter is very kind to test the following ASSERT() added to btrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state); And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82) Which means the device->bdev is NULL, and the dev_state is BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without BTRFS_DEV_STATE_WRITEABLE flag set. [CAUSE] The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev) So the NULL pointer dereference is caused by device->bdev being NULL. This looks impossible by a quick glance, as just before calling btrfs_trim_free_extents_throttle(), we have skipped any device that has BTRFS_DEV_STATE_MISSING flag set. However in this particular case, there is a window where the missing device is later re-scanned, causing btrfs to remove the BTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag. This allows the missing device to re-appear and clear the BTRFS_DEV_STATE_MISSING flag. However the device still does not have the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated. The bdev pointer remains NULL, triggering the crash later. [FIX] This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and device->bdev pointer, and shows a gap in btrfs's re-appearing-device handling. The proper handling of re-appearing device will need quite some extra work, which is out of the context of this small ---truncated--- | ||||
| CVE-2026-64594 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: initialize reset_work at allocation time ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on ffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work); However ffs->reset_work is only ever initialized via INIT_WORK() in ffs_func_set_alt() and ffs_func_disable(), and only on the FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed() when the instance is mounted with the "no_disconnect" option, so for the common case (no "no_disconnect", or mounted and unmounted without ever being deactivated) reset_work is never initialized. ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch it either, so reset_work.func is left NULL. cancel_work_sync() on such a work then trips the WARN_ON(!work->func) guard in __flush_work(): WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount Call trace: __flush_work cancel_work_sync ffs_fs_kill_sb [usb_f_fs] deactivate_locked_super deactivate_super cleanup_mnt __cleanup_mnt task_work_run exit_to_user_mode_loop el0_svc On older kernels cancel_work_sync() on a zero-initialized work struct was a silent no-op, which hid the missing initialization. Initialize reset_work once in ffs_data_new() so it is always valid for the lifetime of the ffs_data, and drop the now-redundant INIT_WORK() calls from the two deactivation paths. | ||||
| CVE-2026-64597 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_close() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_close_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64599 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meson_allocate_chanlist() fail after partial initialization. On the unpatched kernel this reliably triggered a slab-use-after-free. With this fix applied, the same reproducer no longer emits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lock ---truncated--- | ||||
| CVE-2026-18510 | 2 Cozmoslabs, Wordpress | 2 Translatepress – Translate Multilingual Sites With Ai Translation, Wordpress | 2026-08-06 | 7.2 High |
| The TranslatePress – Translate Multilingual sites with AI Translation plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content (URL-encoded gettext markers) in all versions up to, and including, 3.2.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Comment moderation may delay exploitation for first-time commenters, but does not prevent it, as the payload uses only WordPress-permitted tags and attributes with percent-encoded characters that pass wp_kses URL validation unmodified. | ||||
| CVE-2026-16734 | 2026-08-06 | N/A | ||
| The Stripe Payment Forms by WP Full Pay WordPress plugin before 8.5.2 does not verify that the caller owns the Stripe payment intent referenced by two unauthenticated payment-form AJAX actions, allowing an unauthenticated visitor — using a nonce that is embedded in every public page containing a payment form — to change the amount of a payment intent that the Stripe Payment Forms by WP Full Pay WordPress plugin before 8.5.2 then updates server-side through the Stripe API with the store's secret key. An ownership check added in 8.5.0 was applied to only one payment-intent handler, leaving the pricing-recalculation and payment-intent-update actions unprotected against amount manipulation. | ||||
| CVE-2026-16054 | 2026-08-06 | N/A | ||
| The Drag and Drop Multiple File Upload for WooCommerce WordPress plugin before 1.1.8 does not prevent unauthenticated users from obtaining a valid nonce that is the only control gating its file-deletion routine, allowing anonymous attackers to delete files staged in its upload directory and irreversibly destroy customers' pending order attachments. | ||||
| CVE-2026-24552 | 2 Mischiefmarmot, Wordpress | 2 Create By Mediavine, Wordpress | 2026-08-06 | 8.5 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in John-Michael L'Allier Create allows Blind SQL Injection. This issue affects Create: from n/a through 2.5.3. | ||||
| CVE-2026-64596 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo() Since commit 1e7ab6f67824 ("anon_inode: rework assertions"), path_noexec() warns when an anonymous-inode file is mmap'd from a superblock that has not set SB_I_NOEXEC. dma-buf backs its files this way and never set the flag, so mmap of any exported buffer trips the warning on a CONFIG_DEBUG_VFS=y kernel: WARNING: CPU: 11 PID: 121813 at fs/exec.c:118 path_noexec+0x47/0x50 do_mmap+0x2b5/0x680 vm_mmap_pgoff+0x129/0x210 ksys_mmap_pgoff+0x177/0x240 __x64_sys_mmap+0x33/0x70 init_pseudo() sets up internal SB_NOUSER mounts that are never path-reachable. Set both flags here so every pseudo filesystem gets them by default instead of each caller setting them. SB_I_NODEV is inert for unreachable mounts. SB_I_NOEXEC has one visible effect: an executable mapping of a pseudo-fs fd, such as a dma-buf, now fails with -EPERM, which is the invariant the assertion enforces. No in-tree caller maps these executable. Reproduce on CONFIG_DEBUG_VFS=y: make -C tools/testing/selftests/dmabuf-heaps sudo ./tools/testing/selftests/dmabuf-heaps/dmabuf-heap -t system | ||||
| CVE-2026-64589 | 1 Linux | 1 Linux Kernel | 2026-08-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix NULL-deref on adapter registration failure If adapter registration ever fails the release callback would trigger a NULL-pointer dereference as the completion struct has not been initialised. Note that before the offending commit this would instead have resulted in a minor memory leak of the adapter name. | ||||
| CVE-2023-7355 | 2026-08-06 | N/A | ||
| Erroneously reserved under wrong year by automation defect; never assigned. | ||||