Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90160 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_header_len is 14 but the cached copy needs 16 bytes. If an LWT_XMIT BPF program calls bpf_skb_change_head(skb, 1, 0), the skb can still have 15 bytes of headroom after the program. The existing check accepts that, after which neigh_hh_output() hits its headroom warning and drops the skb. Use LL_RESERVED_SPACE(dst->dev) in the post-BPF headroom check to match the reservation made before LWT xmit. | ||||
| CVE-2026-90159 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME. | ||||
| CVE-2026-90158 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered. | ||||
| CVE-2026-90157 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-bound validation already present in the sockptr-based getsockopt hook. | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90152 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails. | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90148 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease(). | ||||
| CVE-2026-90147 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com | ||||
| CVE-2026-90144 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page | ||||
| CVE-2026-90140 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() | delayed_release() | fc->release() | -> cuse_fc_release() | ^^^ freed text! The freed module text is unmapped by vfree(), so the jump into the stale callback triggers a page-fault Oops. If the virtual address is subsequently reused, the callback could execute unrelated code (undefined behaviour). Fix this by calling rcu_barrier() in cuse_exit() so that any pending fuse_conn release callback completes before the module is removed. | ||||
| CVE-2026-90139 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function. | ||||
| CVE-2026-90128 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path. | ||||
| CVE-2026-90127 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown. | ||||
| CVE-2026-90126 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own). | ||||
| CVE-2026-90124 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved. | ||||
| CVE-2026-90122 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-90121 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed. | ||||