Export limit exceeded: 20882 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20882 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64110 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix potential skb leak in igc_fpe_xmit_smd_frame() When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 | ||||
| CVE-2026-64111 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. | ||||
| CVE-2026-64114 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-64363 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced. | ||||
| CVE-2026-64209 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access. | ||||
| CVE-2026-64211 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU. | ||||
| CVE-2026-64212 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") | ||||
| CVE-2026-64214 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. [Maddy: Fixed the commit title] | ||||
| CVE-2026-64224 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix double free in rvu_rep_rsrc_init() rvu_rep_rsrc_init() allocates queue memory before calling otx2_init_hw_resources(). When hardware resource setup fails, otx2_init_hw_resources() already unwinds the partially initialized SQ, CQ, and aura state before returning an error. The representor error path then calls otx2_free_hw_resources() again and can free the same resources a second time. Fix this by splitting the cleanup labels so that a failure from otx2_init_hw_resources() only releases queue memory. Keep the otx2_free_hw_resources() call for failures that happen after hardware resource initialization completed successfully. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2 representor hardware. | ||||
| CVE-2026-64230 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc : regulator_notifier_call_chain lr : tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. | ||||
| CVE-2026-64234 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. | ||||
| CVE-2026-64236 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: davinci: fix division by zero on missing clock-frequency When the 'clock-frequency' property is missing from the device tree, the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this macro was defined in kHz (100), whereas the device tree property is expected in Hz. The probe function divided the fallback value by 1000, causing integer truncation that resulted in dev->bus_freq = 0. This triggered a deterministic division-by-zero kernel panic when calculating clock dividers later in the probe sequence. Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000) to match the expected device tree property unit, allowing the existing division logic to work correctly for both cases. | ||||
| CVE-2026-64237 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | ||||
| CVE-2026-64244 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. | ||||
| CVE-2026-64248 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: report dying CPU to RCU in stop_this_cpu() smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") however, irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. That is the asm-generic default used by MIPS. Any irq_work_sync() issued in the reboot/shutdown path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue was noticed on several Realtek MIPS switch SoCs (MIPS interAptiv) and came up during kernel bump downstream in OpenWrt from 6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable branch. The patch also has been backported all the way back to 6.1. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. MIPS shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug offline path is not unprecedented: arm64 does the same in cpu_die_early(). There it is an exception for a CPU that was coming online and is aborting bringup, rather than the default shutdown action as on MIPS. | ||||
| CVE-2026-64253 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kernel/fork: clear PF_BLOCK_TS in copy_process() PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is non-NULL, and blk_finish_plug() clears it via __blk_flush_plug() before NULLing the plug pointer. copy_process() breaks the invariant by inheriting PF_BLOCK_TS from the parent while resetting the child's plug to NULL. Clear PF_BLOCK_TS alongside that assignment so callers can rely on "PF_BLOCK_TS set implies current->plug != NULL" and dereference current->plug unguarded. | ||||
| CVE-2026-64256 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64. | ||||
| CVE-2026-64258 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: remove request-less entries from ent_w_req_queue to fix NULL deref If a copy into the userspace ring buffer fails, a request will be terminated and fuse_uring_req_end() will set ent->fuse_req to NULL but it will leave the entry on ent_w_req_queue in FRRS_FUSE_REQ state. This can lead to a NULL deref if the request expiration logic scans ent_w_req_queue in the window before the entry is moved off it. Fix this by taking the entry off ent_w_req_queue and changing its state from FRRS_FUSE_REQ to FRRS_INVALID before terminating the request. | ||||
| CVE-2026-64262 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: end fuse_req on io-uring cancel task work When io_uring delivers task work with tw.cancel set (PF_EXITING, PF_KTHREAD fallback, or percpu_ref_is_dying on the ring context), fuse_uring_send_in_task() takes the cancel branch, assigns -ECANCELED, and falls through to fuse_uring_send(). That path only flips the entry to FRRS_USERSPACE and completes the io_uring cmd; it never discharges the ring entry's owning reference to the fuse_req that fuse_uring_add_req_to_ring_ent() handed it at dispatch time. fuse_uring_send_in_task() tw.cancel == true err = -ECANCELED fuse_uring_send(ent, cmd, err, issue_flags) ent->state = FRRS_USERSPACE list_move(&ent->list, &queue->ent_in_userspace) ent->cmd = NULL io_uring_cmd_done(-ECANCELED) /* ent->fuse_req still set, req still hashed */ The fuse_req stays linked on fpq->processing[hash] and fuse_request_end() is never invoked. The originating syscall thread blocks in D-state in request_wait_answer() until fuse_abort_conn() runs, which can be the entire connection lifetime. For FR_BACKGROUND requests fc->num_background is never decremented either, so repeated cancels inflate the counter until max_background is hit and all later background ops stall. tw.cancel does not imply a connection abort (e.g. a single io_uring worker thread exits while the fuse connection stays up), so this cannot be left for fuse_abort_conn() to clean up. Ending the req but still routing the entry through fuse_uring_send() is not enough: that leaves a req-less entry on ent_in_userspace, and ent_list_request_expired() dereferences ent->fuse_req unconditionally on the head of that list, which would then NULL-deref. Fix the cancel branch to release the entry directly. Remove it from the queue, complete the io_uring cmd, end the fuse_req, free the entry, and drop its queue_refs (waking the teardown waiter if it was the last). | ||||