Export limit exceeded: 376502 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376502 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68130 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_id assignment to after ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user rather than the pre-authentication lookup result. This matches the ordering already used by krb5_authenticate(), where destroy_previous_session() is called only after ksmbd_krb5_authenticate() returns success. | ||||
| CVE-2026-68131 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | ||||
| CVE-2026-68132 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: super: fix emergency thaw deadlock on frozen block devices do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount exclusively. If the block device was frozen via bdev_freeze() dropping the last block layer freeze reference calls fs_bdev_thaw() which reacquires s_umount: do_thaw_all_callback(sb) super_lock_excl(sb) # holds sb->s_umount bdev_thaw(sb->s_bdev) mutex_lock(&bdev->bd_fsfreeze_mutex) # bd_fsfreeze_count drops 1 -> 0 bd_holder_ops->thaw == fs_bdev_thaw get_bdev_super(bdev) bdev_super_lock(bdev, true) super_lock(sb, true) down_write(&sb->s_umount) # same task: deadlock The emergency thaw worker deadlocks against itself holding both s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount, freeze, or thaw of that filesystem and block device. [ 81.878470] sysrq: Show Blocked State [ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000 [ 81.884876] Workqueue: events do_thaw_all [ 81.886656] Call Trace: [ 81.887759] <TASK> [ 81.888763] __schedule+0x579/0x1420 [ 81.890372] schedule+0x3a/0x100 [ 81.891794] schedule_preempt_disabled+0x15/0x30 [ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900 [ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10 [ 81.896528] down_write+0xbd/0xc0 [ 81.897505] super_lock+0x91/0x180 [ 81.898457] ? __mutex_lock+0xa99/0x1140 [ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400 [ 81.902069] bdev_super_lock+0x5b/0x150 [ 81.903132] get_bdev_super+0x10/0x60 [ 81.904042] fs_bdev_thaw+0x23/0xf0 [ 81.904755] bdev_thaw+0x82/0x100 [ 81.905484] do_thaw_all_callback+0x2c/0x50 [ 81.906298] __iterate_supers+0x5d/0x130 [ 81.907067] do_thaw_all+0x20/0x40 [ 81.907739] process_one_work+0x206/0x5e0 [ 81.908545] worker_thread+0x1e2/0x3c0 [ 81.909339] ? __pfx_worker_thread+0x10/0x10 [ 81.910171] kthread+0xf4/0x130 [ 81.910799] ? __pfx_kthread+0x10/0x10 [ 81.911528] ret_from_fork+0x2e2/0x3b0 [ 81.912259] ? __pfx_kthread+0x10/0x10 [ 81.913010] ret_from_fork_asm+0x1a/0x30 [ 81.913806] </TASK> bdev_super_lock() even documents the violated requirement with lockdep_assert_not_held(&sb->s_umount). Acquiring bd_fsfreeze_mutex under s_umount also inverts the bd_fsfreeze_mutex vs. s_umount ordering established by bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer freeze even when the recursive path isn't hit. Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin the superblock with an active reference instead as filesystems_freeze_callback() does. The active reference keeps the superblock from being shut down and so ->s_bdev stays valid without holding s_umount. The block-layer-held freeze is dropped by fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as a regular unfreeze would and thaw_super_locked() handles filesystem-level freezes as before. The emergency thaw path has deadlocked like this in one form or another for a long long time but the current exclusively-held shape dates back to commit [1] where thaw_bdev() already ended in thaw_super() with s_umount held by do_thaw_all_callback(). | ||||
| CVE-2026-68133 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | ||||
| CVE-2026-68135 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-68142 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: geneve: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns geneve->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in geneve->net can rewrite a geneve device whose underlay lives in geneve->net. geneve_changelink() applies the new configuration against geneve->net: geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair reopen the underlay sockets in that netns (geneve_sock_add() uses geneve->net), so the same reasoning as the tunnel changelink series applies here. Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68146 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Add global mutex to serialize trace_parser access In ftrace, the trace_parser structure is allocated and initialized when a trace file is opened, and is subsequently used across write and release handlers to parse user input. The affected handler paths and their specific functions are: - Open paths: ftrace_regex_open(), ftrace_graph_open() - Write paths: ftrace_regex_write(), ftrace_graph_write() - Release paths: ftrace_regex_release(), ftrace_graph_release() If userspace opens a trace file descriptor and shares it across multiple threads, concurrent write calls will race on the parser's internal state, specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted input or undefined behavior. Fix this by adding a global mutex, parser_lock, to serialize all access to trace_parser across write and release paths, preventing concurrent corruption of parser state. | ||||
| CVE-2026-68149 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE. | ||||
| CVE-2026-68156 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the old ceph_buffer and its vec.iov_base, but auth->authorizer_buf still points at that freed memory. A subsequent msgr1 reconnect can therefore queue the stale pointer and trigger a KASAN slab-use-after-free in _copy_from_iter() while tcp_sendmsg() copies the authorizer. Refresh auth->authorizer_buf and auth->authorizer_buf_len after a successful authorizer rebuild so the messenger sends the current buffer. | ||||
| CVE-2026-68158 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | ||||
| CVE-2026-68159 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | ||||
| CVE-2026-68165 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function. | ||||
| CVE-2026-68175 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was added May 12th 2008. At that time, resources created in pipe_open() could not be freed because there was not pipe_close function pointer of the tracer. The pipe_close function pointer was added in December 7th, 2009, but the mmiotrace tracer was not updated. mmio_pipe_open() allocates a header_iter and takes a pci_dev reference when trace_pipe is opened. mmio_close() frees them, but it was only wired to the tracer's .close callback. tracing_release_pipe() invokes .pipe_close, not .close, when the trace_pipe file is released. As a result, closing trace_pipe with the mmiotrace tracer active leaked the header_iter allocation and left a stale pci_dev reference. Set .pipe_close to mmio_close, matching how function_graph wires both callbacks to the same handler. Note, if the trace_pipe is read to completion, it will clean up the resources, but if one were to run: # head -n 1 /sys/kernel/tracing/trace_pipe VERSION 20070824 Over and over again, it would trigger a massive leak. | ||||
| CVE-2026-68177 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from freeing, but can still be triggered until after the RCU grace period has ended. The freeing of the enable_event data is put into the private_data_free() callback, but the put of the module refcount is done immediately. It is possible that if a module is removed that has an event that would enable (or disable) it is still active, it can read the data of the module after it is removed causing a use-after-free bug. Move the trace_event_put_ref() that releases the module into the delayed callback so that the module can not be removed until any reference to its events are finished. | ||||
| CVE-2026-68228 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Move src_buf Removal to finish_encode During encoder processing, there is a case where the IRQ response could return the buffer back to userspace via v4l2_m2m_buf_done call. In this time, userspace could queue up this same buffer before start_encode removes the index from the ready queue. This would then lead to a case where the buffer in the ready queue could be a self loop due to the WRITE_ONCE(prev->next, new) call in __list_add. When __list_del is finally called, the loop is already made so nothing points back to ready queue list head and pointers are poisoned. A buffer should not be marked as DONE before the buffer is removed from m2m ready queue. Move removal entirely to finish_encode. | ||||
| CVE-2026-68231 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clear_bit label, which already drains s->queued_bufs via vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68233 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Shut down BO cache timer before teardown The BO cache timer callback schedules time_work, and time_work can rearm the timer through vc4_bo_cache_free_old(). vc4_bo_cache_destroy() deletes the timer and then cancels the work, which does not break that cycle: the work being cancelled can rearm the timer, and the timer then queues work again after teardown. Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the cycle ends with cancel_work_sync(). | ||||
| CVE-2026-68238 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) | ||||
| CVE-2026-68241 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/mst: limit DP MST ESI service loop The loop in intel_dp_check_mst_status() keeps servicing interrupts originating from the sink without bound. Add an upper bound to the new interrupts occurring during interrupt processing to not get stuck on potentially stuck sink devices. Use arbitrary 32 tries to clear incoming interrupts in one go. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Note: The condition likely pre-dates the commit in the Fixes: tag, but this is about as far back as a backport has any chance of succeeding. Before that, the retry had a goto. (cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) | ||||
| CVE-2026-68242 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix NULL deref on sched_engine alloc failure Avoid using intel_context_put() before intel_context_init() in execlists_create_virtual() as the kref_put() inside would lead to NULL deref on the IOCTL path when sched_engine allocation fails. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 4f2a12f2d50e9f48227656e4dcbd6423506be31d) | ||||