Export limit exceeded: 393556 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393556 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89959 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove The vfio_ap_config_remove function uses the bitmap_andnot function to clear bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains assigned to the mdev). This prevents the explicitly unplugged control domains from being removed the KVM guest. The bitmap_and function is used instead. | ||||
| CVE-2026-89958 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL The ap_driver structure has two fields which are function pointers to callbacks: * .on_config_changed: called at the start of the AP bus scan function to notify the device driver that the host AP configuration has changed and the associated AP devices will be added or removed accordingly. This gives the implementor a chance to evaluate the configuration changes and respond to them before the associated devices are added or removed. * .on_scan_complete: Called at the end of the AP bus scan function to notify the device driver that the host AP configuration has changed and the AP devices have been added or removed accordingly. This gives the implementor the opportunity to respond to the changes after the associated devices are added or removed. These two callbacks are implemented in the vfio_ap device driver via the vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively. Within the call stack of these two callback functions the matrix_mdev->kvm->lock mutex is taken without checking whether matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set, trying to take the lock will trigger a NULL pointer dereference. This patch adds checks for matrix_mdev->kvm == NULL before taking the matrix_mdev->kvm->lock mutex. Note that the matrix_mdev->kvm->lock mutex taken in the vfio_ap_mdev_hot_plug_config function is moved to the calling function along with the matrix_dev->mdevs_lock which is needed there to access the fields of the matrix_mdev. It makes little sense to make the change the check for matrix_mdev->kvm there before taking the kvm->lock mutex only to have to move it out via another patch, so it is done in this patch. It is important to make note of the following: 1. The matrix_dev->guests_lock is acquired at the start of both callback functions. This ensures that matrix_mdev will not be removed via the vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock before removing the object; so, matrix_mdev will be available for the duration of the callback functions. 2. The matrix_dev->mdevs_lock mutex must be taken in order to access fields within the matrix_mdev structure 3. matrix_mdev->kvm->lock mutex must be taken before the matrix_dev->mdevs_lock to prevent a lockdep splat. 4: The kvm->lock must be held while plugging the guest's AP configuration into its SIE state description via the vfio_ap_mdev_update_guest_apcb function. 5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it is not NULL before doing the hot plug of the guest's AP configuration. | ||||
| CVE-2026-89957 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of bitmap_andnot() to determine whether the guest APCB needs to be updated. However, bitmap_andnot() returns false when the resulting destination bitmap is empty. This means that if the only adapter, domain or control domain assigned to an mdev is removed from the host's AP configuration, the bit is correctly cleared from the shadow APCB, but bitmap_andnot() returns false because the result is an empty bitmap. Consequently, do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called, leaving the KVM guest with stale hardware access to the unplugged AP devices. Fix this by replacing the bitmap_andnot() return value check with bitmap_intersects() to determine whether the shadow APCB actually overlaps with the removal mask. If there is an intersection, call bitmap_andnot() solely for its side effect of clearing the bits, then unconditionally set do_hotplug to trigger the guest APCB update. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89955 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix NULL deref in status_show() during queue probe When vfio_ap_mdev_probe_queue() creates the sysfs attribute group, the queue's driver data has not yet been set. A concurrent read of the 'status' attribute can therefore call dev_get_drvdata() and get NULL, which is then passed directly to vfio_ap_mdev_for_queue() where q->apqn is unconditionally dereferenced, causing a NULL pointer dereference. Fix this by acquiring the update locks before calling sysfs_create_group(). The status_show() function acquires guests_lock before reading the driver data, so any concurrent read will block until after dev_set_drvdata() has been called and the update locks are released. As a bonus, the APQN no longer needs to be read from the queue struct after allocation — it can be read directly from apdev before allocation and stored in a local variable, which is then assigned to q->apqn once the allocation succeeds. | ||||
| CVE-2026-89954 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: afs: validate v2 image info bounds The AFS v2 parser uses footer[8] to locate the image information block inside the current erase block, then uses the image information region_count to walk entries from a fixed local array. The footer offset and region count come from flash contents and are not checked against the erase block or the local image-info array before use. Reject v2 entries whose image information offset would underflow the erase block calculation, and reject region counts that cannot fit in the local image-info array before walking region entries. | ||||
| CVE-2026-89953 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mtdoops: free page bitmap when the backing MTD is removed mtdoops_notify_add() allocates oops_page_used when the configured MTD device is registered. mtdoops_notify_remove() detaches from that device but leaves the bitmap allocated. If the same MTD device is later registered again, the add path allocates a new bitmap and overwrites the old pointer, leaking one vmalloc allocation per remove/add cycle. This is only visible when the backing MTD device can disappear and be registered again while mtdoops remains loaded, so the usual static MTD case does not expose it. Free the bitmap after unregistering the dumper and flushing the pending workers, then clear the pointer and page count before a later attach can allocate fresh state. Clearing the pointer also keeps the module exit path from freeing the same bitmap a second time after a remove event. | ||||
| CVE-2026-89952 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: validate ONFI extended parameter page sections nand_flash_detect_ext_param_page() allocates the length declared by the ONFI parameter page, then treats the data as a fixed header followed by variable-length sections. It reads that header and advances over sections without first proving that the fixed page and each current section fit in the allocation. Reject pages shorter than the fixed header, track the remaining variable area while walking sections, and require the ECC section to contain every field read from struct onfi_ext_ecc_info. Use device-scoped diagnostics that identify the malformed ONFI section. | ||||
| CVE-2026-89951 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix stale receive device on merged fragments Fragment reassembly reuses the skb from the highest-numbered buffered fragment as the merged packet. When that fragment was received on a hard interface which is deleted before the chain completes, the merged skb can re-enter the receive path with a stale skb->dev and skb_iif. batadv_batman_skb_recv() passes such merged packets through the normal receive handlers again. DAT and bridge loop avoidance both derive the ARP header length from skb->dev, so they can dereference the freed net_device before the packet reaches the local mesh interface. Refresh the receive device metadata from the current receive device before running the packet handlers. This keeps internally reinjected merged fragments consistent with the normal receive path after hard interface teardown. | ||||
| CVE-2026-89950 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: linearize skbuff for packet generation batadv_mcast_forw_packet() and batadv_mcast_forw_scrape() is not only called (indirectly) by the unsharing+linearizing batadv_recv_mcast_packet() handler. When it is called (indirectly) by batadv_mcast_forw_mcsend() then it will be unshared but not linearized. The SKB_LINEAR_ASSERT() can therefore cause a fatal BUG(). The linearization should happen during the expansion of the head because the scrape function can be hit already during the initial batadv_mcast_forw_mode() selection code: * batadv_interface_tx * batadv_mcast_forw_mode * batadv_mcast_forw_mode_by_count() * batadv_mcast_forw_push() -> calls batadv_mcast_forw_expand_head() before everything else * batadv_mcast_forw_push_tvlvs() * batadv_mcast_forw_push_dests() * batadv_mcast_forw_push_adjust_padding() * batadv_mcast_forw_scrape() | ||||
| CVE-2026-89949 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: avoid unaligned fault in IP extraction Independent of the alignment of the ARP packet in the SKB, either the batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access (on HW without native unaligned read support). Use get_unaligned() to handle this properly on all architectures. | ||||
| CVE-2026-89948 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix freeing of claims on meshif deletion When the mesh interface is getting deleted, then batadv_bla_del_backbone_claims() (via batadv_bla_purge_backbone_gw()) could make sure that all claims gets removed. But this function is only executed when bat_priv->bla.claim_hash is not NULL. And since batadv_bla_free() is always setting it to NULL before it is (indirectly) called, it was never actually executed. But the batadv_bla_purge_claims() -> batadv_handle_unclaim() is at the moment too fragile because the BLA code is not handling the rehashing in batadv_bla_update_orig_address(). The stored backbone address doesn't have to be the one actually used for the hash bucket selection during the initial adding of the backbone. The batadv_handle_unclaim() can therefore fail to find the respective backbone for the unclaim and then stop the deletion. But the actual backbone_gw object is not needed for the unclaim because all relevant information is always provided by the caller. And the check for the existence of the backbone_gw doesn't provide any additional security check for the deletion of a claim. | ||||
| CVE-2026-89947 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: meson: align gxbb_32k_clk_sel number of parents with actual count The following out-of-bounds read has been observed by Christian on a GXBB WeTek Hub: ================================================================== BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418 Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT Hardware name: WeTek Hub (DT) Call trace: show_stack+0x14/0x20 (C) dump_stack_lvl+0x74/0x94 print_report+0x164/0x4b0 kasan_report+0x98/0xd8 __asan_report_load8_noabort+0x1c/0x24 __clk_register+0x1b70/0x2418 devm_clk_hw_register+0x74/0x15c meson_clkc_init+0xd4/0x20c meson_clkc_syscon_probe+0x5c/0x94 platform_probe+0xbc/0x17c really_probe+0x184/0x844 __driver_probe_device+0x154/0x35c driver_probe_device+0x60/0x188 __driver_attach+0x168/0x4a0 bus_for_each_dev+0xec/0x180 driver_attach+0x38/0x58 bus_add_driver+0x238/0x4c0 driver_register+0x150/0x388 __platform_driver_register+0x54/0x7c gxbb_clkc_driver_init+0x18/0x20 do_one_initcall+0xb8/0x340 kernel_init_freeable+0x49c/0x52c kernel_init+0x24/0x148 ret_from_fork+0x10/0x20 The buggy address belongs to the variable: gxbb_32k_clk_parents+0x60/0x400 The buggy address belongs to a vmalloc virtual mapping The buggy address belongs to the physical page: Memory state around the buggy address: ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9 >ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 ^ ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9 ================================================================== Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel mux but didn't adjust the hard-coded num_parents field. Fix the actual number of parents of that mux by using ARRAY_SIZE instead (avoiding similar problems in future). | ||||
| CVE-2026-89946 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l33: drain threaded IRQ before runtime suspend cs35l33_runtime_suspend() currently switches the codec into regcache_cache_only(true) and powers it down without first quiescing the threaded IRQ registered by devm_request_threaded_irq(). That leaves a window where cs35l33_irq_thread() can still run after suspend has closed off live register access. A running system can reach this during runtime PM while the driver still has critical fault IRQs unmasked. If the threaded handler runs in that window, it reads volatile INT_STATUS_1/2 after cache_only has been enabled, ignores the regmap_read() failures, and can still drive the AMP_SHORT_RLS, CAL_ERR_RLS, OTE_RLS, and OTW_RLS release paths. Use disable_irq() before entering cache_only/power-off so any in-flight threaded handler is drained and no new IRQ thread can run during the suspended state. Re-enable the IRQ only after runtime_resume() has restored live register access with regcache_sync(). Since probe only warns if devm_request_threaded_irq() fails, track whether the IRQ was actually installed before disabling or re-enabling it. | ||||
| CVE-2026-89945 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l34: drain threaded IRQ before runtime suspend cs35l34_runtime_suspend() currently switches the codec into regcache_cache_only(true), asserts reset low, and powers the device off without first quiescing the threaded IRQ registered by devm_request_threaded_irq(). That leaves a window where cs35l34_irq_thread() can still run after suspend has removed live hardware access. A running system can reach this during runtime PM while the driver still has critical fault IRQs unmasked. If the threaded handler runs in that window, it reads volatile INT_STATUS_1..4 after cache_only has been enabled, ignores the regmap_read() failures, and can still execute the PROT_RELEASE_CTL release sequence or the BST fault power-down writes. Use disable_irq() before entering cache_only/reset-low/power-off so any in-flight threaded handler is drained and no new IRQ thread can run while the device is suspended. Re-enable the IRQ only after runtime_resume() has restored live register access with regcache_sync(). Since probe only logs request_threaded_irq() failures and keeps going, track whether the IRQ was actually installed before disabling or re-enabling it. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89943 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: loongson: Fix error handling in ACPI property parsing In loongson_card_parse_acpi(), the return value of device_property_read_string() for the `codec-dai-name` property was ignored. If the property is missing or invalid, an uninitialized pointer would be used later, potentially leading to undefined behavior. Fix this by checking the return value and propagating the error appropriately. | ||||
| CVE-2026-89942 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix potential use-after-free in anonymous buffer release An anonymous buffer handle holds a reference to the underlying IIO device. The reference is dropped in the buffer handle's release function. If the device has been removed, either through unbind or hot-unplug, the buffer handle might hold the last reference. The release function takes the mutex for the buffer using a guard, which means the unlock happens after all the code in the function, including `iio_device_put()`. If the anonymous buffer holds the last reference this might free both the IIO device and the buffer, which contains the mutex, leading to use-after-free when the mutex is unlocked. Fix this by using a scoped guard just around the buffer dmabuf list access, making sure the mutex is unlocked before releasing the IIO device. Version 10 of the patch that introduced this issue used this exact scheme of first unlocking and then dropping the reference [1]. During review it was suggested to use a guard instead, and version 11 made that change [2]. | ||||
| CVE-2026-89941 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Make IIO DMA fence release RCU-safe The `dma_fence` documentation states that if a custom release implementation is provided, the `dma_fence` object must be freed in an RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`, which might result in a use-after-free. Remove the custom `release` implementation. This makes the DMA fence core fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence. This requires that the fence be the first member of `struct iio_dma_fence`. Using the default release method for extended DMA fence structures is a common pattern. | ||||
| CVE-2026-89940 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Tie IIO dma fence lock lifetime to the fence The `iio_dma_fence` implementation currently uses a lock embedded in the `iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the `iio_dmabuf_priv`, which can cause a use-after-free. Tie the lifetime of the lock to the lifetime of the fence by embedding them in the same struct. We can't just hold a reference to the `iio_dmabuf_priv` from the `iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the fence release callback is not allowed to sleep. Note that the `dma_fence` framework now has an internal lock that gets used when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to allow this patch to be backportable use an external lock. | ||||