Export limit exceeded: 381540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381540 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74962 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.1 High |
| Site isolation issue in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74953 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.8 High |
| Privilege escalation in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74949 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.8 High |
| Privilege escalation due to use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74941 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.8 High |
| Privilege escalation in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-18249 | 1 Ibm | 1 I | 2026-08-19 | 8.4 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of pointers read from Java-controlled addresses. | ||||
| CVE-2026-74475 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use neigh_ha_snapshot() in route_shortcircuit() The neighbour hardware address n->ha can be updated asynchronously by the neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without holding the seqlock loop can lead to torn reads or reading a partially updated MAC address. Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under read_seqbegin()/read_seqretry() lock protection before using it. Note that arp_reduce() and neigh_reduce() seem to have the same issue left for future patches. | ||||
| CVE-2026-74471 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | ||||
| CVE-2026-74470 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-18193 | 1 Ibm | 1 I | 2026-08-19 | 8.9 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to bypass security restrictions due to improper validation of user-controlled addresses. | ||||
| CVE-2026-74463 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message). | ||||
| CVE-2026-17476 | 1 Ibm | 1 I | 2026-08-19 | 4.8 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an improper buffer write. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74456 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-18101 | 1 Ibm | 1 I | 2026-08-19 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to gain elevated privileges due to improper management of thread authority swaps. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-72181 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: sched: Fix CPUMASK_OFFSTACK memory corruption This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data directly into the allocated buffer. | ||||
| CVE-2026-72146 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent(). | ||||