Export limit exceeded: 372370 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372370 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-66374 | 1 Nic | 1 Knot Resolver | 2026-08-01 | 8.1 High |
| Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path. | ||||
| CVE-2026-64257 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions. | ||||
| CVE-2026-64262 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: end fuse_req on io-uring cancel task work When io_uring delivers task work with tw.cancel set (PF_EXITING, PF_KTHREAD fallback, or percpu_ref_is_dying on the ring context), fuse_uring_send_in_task() takes the cancel branch, assigns -ECANCELED, and falls through to fuse_uring_send(). That path only flips the entry to FRRS_USERSPACE and completes the io_uring cmd; it never discharges the ring entry's owning reference to the fuse_req that fuse_uring_add_req_to_ring_ent() handed it at dispatch time. fuse_uring_send_in_task() tw.cancel == true err = -ECANCELED fuse_uring_send(ent, cmd, err, issue_flags) ent->state = FRRS_USERSPACE list_move(&ent->list, &queue->ent_in_userspace) ent->cmd = NULL io_uring_cmd_done(-ECANCELED) /* ent->fuse_req still set, req still hashed */ The fuse_req stays linked on fpq->processing[hash] and fuse_request_end() is never invoked. The originating syscall thread blocks in D-state in request_wait_answer() until fuse_abort_conn() runs, which can be the entire connection lifetime. For FR_BACKGROUND requests fc->num_background is never decremented either, so repeated cancels inflate the counter until max_background is hit and all later background ops stall. tw.cancel does not imply a connection abort (e.g. a single io_uring worker thread exits while the fuse connection stays up), so this cannot be left for fuse_abort_conn() to clean up. Ending the req but still routing the entry through fuse_uring_send() is not enough: that leaves a req-less entry on ent_in_userspace, and ent_list_request_expired() dereferences ent->fuse_req unconditionally on the head of that list, which would then NULL-deref. Fix the cancel branch to release the entry directly. Remove it from the queue, complete the io_uring cmd, end the fuse_req, free the entry, and drop its queue_refs (waking the teardown waiter if it was the last). | ||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | ||||
| CVE-2026-64267 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: avoid 32-bit prune notification count wrap FUSE_NOTIFY_PRUNE validates the nodeid payload length with: size - sizeof(outarg) != outarg.count * sizeof(u64) On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled count multiplication can wrap. A prune notification with count 0x20000000 and no nodeid payload passes the check, enters the copy loop, and asks the device copy path to read nodeids that are not present in the userspace write buffer. In QEMU this reaches the fuse_copy_fill() BUG_ON(!err) path. Validate the payload length with array_size() instead. That accepts exactly the same valid messages, but avoids wrapping arithmetic before the copy loop consumes the count. | ||||
| CVE-2026-64268 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | ||||
| CVE-2026-64270 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer. | ||||
| CVE-2026-64271 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do. | ||||
| CVE-2026-64272 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size. | ||||
| CVE-2026-64274 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. | ||||
| CVE-2026-64280 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. | ||||
| CVE-2026-64285 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Pin source page for write when adding CPUID data for SNP guest When populating a guest_memfd instance with the initial CPUID data for an SNP guest, acquire a writable pin on the source page as KVM will write back the "correct" CPUID information if the userspace provided data is rejected by trusted firmware. Because KVM writes to the source page using a kernel mapping, pinning for read could result in KVM clobbering read-only memory. Note, well-behaved VMMs are unlikely to be affected, as CPUID information is almost always dynamically generated by userspace, i.e. it's unlikely for the CPUID information to be backed by a read-only mapping. [sean: rewrite shortlog and changelog, tag for stable@] | ||||
| CVE-2026-64287 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU on every run. The vGIC list register save and restore use used_lrs as their loop bound and expect it to stay within the number of implemented list registers. While this is generally the case, flush_hyp_vcpu() copies vgic_v3 verbatim and does not enforce this, so a value provided by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2 (host -> EL2). Fix by clamping used_lrs to the number of implemented list registers after the copy, as the trusted path already does in vgic_flush_lr_state(). The number of implemented list registers is constant after init, so it is replicated once from kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on every entry. | ||||
| CVE-2026-64289 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. | ||||
| CVE-2026-64292 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Move vevent memory allocation outside spinlock The veventq memory allocation happens inside the spinlock. Given its depth is decided by the user space, this leaves a vulnerability, where userspace can allocate large queues to exhaust atomic memory reserves. Move the allocation outside the spinlock and use GFP_NOWAIT, which can fail fast under memory pressure without dipping into the GFP_ATOMIC reserves or direct-reclaiming from the threaded IRQ handler. On allocation failure, queue the lost_events_header (so userspace learns of the drop) and return -ENOMEM so the caller learns of the kernel-side memory pressure. This is intentionally distinct from the queue-overflow path, which also queues the lost_events_header but returns 0: a full queue is an expected userspace-pacing condition rather than a kernel error. A subsequent change will cap the upper bound of the veventq_depth. | ||||
| CVE-2026-64294 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied In the case of mincore/madvise MADV_PAGEOUT, this is usually benign, because file_permission(file, MAY_WRITE) will probably succeed, as it uses the proper idmap internally, but it does not need to be the case on e.g a 0444 file where even the owner itself doesn't have permissions to write to it. Since this is clearly not trivial to get right, introduce a file_owner_or_capable() that can carry the correct semantics, and switch the various users in mm to it. The issue was found by manual code inspection & an off-list discussion with Jan Kara. | ||||
| CVE-2026-64301 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. | ||||
| CVE-2026-64303 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: terminate the RX channel on TX prepare failure path When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path. | ||||
| CVE-2026-64304 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds. | ||||
| CVE-2026-64306 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: drbg - Fix returning success on failure in CTR_DRBG drbg_ctr_generate() sometimes returns success when it fails, leaving the output buffer uninitialized. Fix it. | ||||