Export limit exceeded: 393556 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (393556 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89999 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer. This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing. Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior. | ||||
| CVE-2026-89998 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk. | ||||
| CVE-2026-89997 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix resume-vs-remove race If the user issues the resume ioctl and the remove ioctl at the same time, it may be possible that the device is resumed after it is suspended in __dm_destroy. The result is that the table is destroyed without calling the postsuspend method. Dm targets expect that they may be removed only after the postsuspend method method was called. If we break this expectation, it can cause misbehavior in various targets. For example - in the dm-integrity target, the reboot notifier is not unregistered, leading to use-after-free. Fix this bug by refusing to resume if the device is being destroyed. | ||||
| CVE-2026-89996 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the caller's fd table via dma_buf_fd() -> fd_install() before dma_heap_ioctl() copies the result back to userspace. If the trailing copy_to_user() fails, userspace never learns the fd number, but the fd (and the underlying dma-buf reference) are already visible to other threads in the same process and are leaked for the lifetime of the process. The obvious "close it on the failure path" fix is unsafe: once fd_install() has run, another thread can already dup() the fd, send it via SCM_RIGHTS, or close() it and let its number be reused, so a subsequent close_fd() from the ioctl path can operate on an unrelated file. This was pointed out by Christian König on v1 [1]. Restructure the allocation path so that fd_install() is the last, unfailable step of a successful ioctl: 1. heap->ops->allocate() creates the dma_buf. 2. get_unused_fd_flags() reserves an fd number in the caller's fd table without publishing it, so no other thread can observe it. 3. copy_to_user() delivers the fd number to userspace; on failure the fd is returned with put_unused_fd() and the dma_buf reference is dropped with dma_buf_put(), leaving no user- visible state behind. 4. dma_buf_fd_install() publishes the fd and emits the trace_dma_buf_fd tracepoint -- from here on the ioctl cannot fail. A new dma_buf_fd_install() helper is introduced in dma-buf.c to wrap fd_install() together with the DMA_BUF_TRACE() call, preserving the export tracing that dma_buf_fd() provides. dma_heap_ioctl_allocate() is refactored to return the struct dma_buf * directly (returning ERR_PTR on failure) so the caller holds the dmabuf reference across steps 3 and 4. The failure at step 3 is easily reachable from userspace: pass a struct dma_heap_allocation_data that lives in a page whose protection is flipped to PROT_READ between copy_from_user() and copy_to_user() (e.g. via mprotect()). Before this change each such ioctl leaks one dmabuf fd; after it, the fd table is unchanged on failure and only /dev/dma_heap/<name> remains open. No UAPI or heap-driver interface change. [1] https://lore.kernel.org/dri-devel/175e98de-f414-47d7-81c1-c0fe0a8f7f62@amd.com/ | ||||
| CVE-2026-89995 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller. | ||||
| CVE-2026-89994 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: tracing: no ptr dereference during log output The fsl edma events store a pointer to a struct fsl_edma_engine in the ringbuffer and dereference it when a log entry is printed. At this time, the pointer may no longer be valid. Event injection can be used to trigger a crash: $ cd /sys/kernel/tracing $ echo 'value = 0' > events/fsl_edma/edma_writeb/inject $ cat trace The log output needs only edma->membase. Add a membase field at the end of the event and use the new field for log output. Keep the existing fields for backward compatibility. | ||||
| CVE-2026-89993 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Initialize IRQ data before requesting IRQs dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before dw_edma_channel_setup() fills the back pointer. A shared interrupt can therefore enter the handler with dw_irq->dw still NULL, leading to a NULL pointer dereference. Set the back pointer before installing each handler. | ||||
| CVE-2026-89992 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpuidle: dt_idle_genpd: kfree() the original name allocation dt_idle_pd_alloc() kasprintf()s the full node path, then points pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s pd->name, which is no longer the start of the allocation. Copy the basename instead. | ||||
| CVE-2026-89991 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix infinite loop in pcpu_freelist push with one possible CPU __pcpu_freelist_push() can loop forever when only one CPU is possible and an NMI re-enters pcpu_freelist_push() while the interrupted context holds that CPU's freelist lock. After the current-CPU fast path fails, the fallback loop walks cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or when an SMP kernel is limited to one possible CPU with nr_cpus=1 or possible_cpus=1, there are no other possible CPUs to examine. The loop therefore makes no lock acquisition attempt and can never make progress. The following stack was observed on a UP system: NMI context: pcpu_freelist_push free_htab_elem htab_map_delete_elem [perf-event BPF program] __perf_event_overflow perf_event_nmi_handler exc_nmi Interrupted context: __pcpu_freelist_push pcpu_freelist_push free_htab_elem htab_map_delete_elem [raw_tp/sys_enter BPF program] __bpf_trace_sys_enter do_syscall_64 raw_res_spin_lock() detects the same-CPU recursive acquisition and returns -EDEADLK, but the subsequent fallback loop has no candidate head on a system with one possible CPU. Restore the extra fallback head that existed before the rqspinlock conversion. Keep the current-CPU fast path, then try the other possible CPUs and finally the extra head. The additional head lets a push, which cannot fail without losing a preallocated element, make progress when the only per-CPU head is held by the interrupted context. Also check the extra head from the pop path so that nodes placed there can be reused. | ||||
| CVE-2026-89990 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE [..] pc : ceph_mds_check_access+0xd4/0x550 lr : ceph_mds_check_access+0xc8/0x550 [...] Call trace: ceph_mds_check_access+0xd4/0x550 (P) ceph_atomic_open+0x138/0xbe8 path_openat+0xa24/0xfa8 do_filp_open+0x94/0x158 do_sys_openat2+0x88/0xf8 | ||||
| CVE-2026-89989 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ima: Check for ERR_PTR from dentry_path() in validate_hash_algo() dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the buffer. validate_hash_algo() passes the result straight to integrity_audit_msg() without checking. ERR_PTR is not NULL, so integrity_audit_message() sees a valid pointer and calls strlen() on it, which faults: BUG: unable to handle page fault for address: ffffffffffffffdc RIP: 0010:strlen+0x30/0xa0 Call Trace: audit_log_untrustedstring+0x19/0x30 integrity_audit_message+0x366/0x4f0 ima_inode_setxattr+0x512/0x5f0 Check for IS_ERR() and use NULL instead, which makes the audit message skip the name= field instead of crashing. | ||||
| CVE-2026-89988 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Protect kprobe_blacklist with RCU __within_kprobe_blacklist() traverses kprobe_blacklist without holding kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist() removes blacklist entries and immediately frees them with kfree(). A concurrent call to within_kprobe_blacklist() can therefore dereference freed memory. Furthermore, within_kprobe_blacklist() can be called in atomic or non-preemptible contexts where the sleeping kprobe_mutex cannot be taken. Protect kprobe_blacklist with RCU. Use guard(rcu)() and list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim entries safely after a grace period. | ||||
| CVE-2026-89987 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: transfer the pmd dirty bit to the folio on zap zap_huge_pmd_folio() propagates the pmd young bit to the folio for the file case, but not the dirty bit. The pte path does propagate it, in zap_present_folio_ptes() and so does the pmd split path, in __split_huge_pmd_locked(). For most file mappings the omission is harmless, because writing to a shared file mapping goes through page_mkwrite(), which dirties the folio. tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify() is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault(). do_read_fault() does not call fault_dirty_shared_page(), so subsequent stores through that mapping set only the hardware dirty bit in the pmd and never call folio_mark_dirty(). A shmem folio allocated by a fault is marked uptodate but not dirty (see the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at all. Unmapping such a folio - munmap(), or exit_mmap() when the process dies - then loses the only record that it was written, because zap_huge_pmd() drops the pmd without transferring the dirty bit. Reclaim afterwards sees a clean shmem folio: the whole swap-out block in shrink_folio_list() is inside "if (folio_test_dirty(folio))", so pageout() is skipped and the folio falls into __remove_mapping(). There, folio_is_file_lru() is false for a swapbacked folio, so no shadow entry is created and __filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The data is freed without ever being written to swap, and the next fault on that index returns a freshly zeroed folio. This is silent data loss for any process that keeps state in a MAP_SHARED tmpfs segment across an unmap - for example a cache handed from one process generation to the next through /dev/shm. It requires the folio to be PMD-mapped, so it only shows up once shmem THP is enabled (which is what we did in Meta fleet and started noticing crashes); with THP off the pte path transfers the dirty bit correctly. It also only becomes visible when swap is enabled, because with no swap device shmem folios (which are on the anon LRU) are not scanned by reclaim at all, so the clean folio is never dropped. Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a 2MB-backed region, write a known pattern through the resulting mapping, munmap, force reclaim of the cgroup, then re-map and read back. Without this patch the region reads back as zeros and vmstat shows zswpout 0 - the data was discarded rather than swapped. With this patch the region reads back correctly and the pages are swapped out as expected. With huge=never, or when the first touch is a write, the test passes either way. | ||||
| CVE-2026-89986 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix sleeping allocation in alloc_pages_bulk_weighted_interleave() syzbot reported a sleeping function called from invalid context splat in bucket_table_alloc(). When rhashtable_insert_slow() rehashes the table under rcu_read_lock(), it calls bucket_table_alloc(..., GFP_ATOMIC | __GFP_NOWARN). If the bucket table allocation uses vmalloc, __vmalloc_node_range_noprof() invokes vm_area_alloc_pages() -> alloc_pages_bulk_mempolicy_noprof() with the passed GFP_ATOMIC flags. If the current task has an MPOL_WEIGHTED_INTERLEAVE mempolicy, alloc_pages_bulk_weighted_interleave() is called and currently hardcodes GFP_KERNEL when allocating the temporary weights array, triggering a might_alloc() splat in atomic/RCU contexts. Pass the gfp flags (masked with GFP_RECLAIM_MASK to strip page-allocator zone modifiers like __GFP_HIGHMEM) received by alloc_pages_bulk_weighted_interleave() to kmalloc() instead of hardcoding GFP_KERNEL. Since the weights buffer is immediately initialized in full, kmalloc() is sufficient. | ||||
| CVE-2026-89985 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: keep folio's objcg same as its node memcg_reparent_objcgs() has an inherent assumption that a folio's objcg is the objcg of the folio's node. Folio migration across nodes breaks that assumption: the new folio simply inherits the old folio's objcg while living on a different node. Once the assumption is broken, the reparenting of the folio's objcg and the reparenting of the folio's LRU list are no longer atomic. memcg_reparent_objcgs() handles one node per iteration and drops all the locks in between, so the objcg gets reparented in the iteration for the objcg's node while the LRU list gets spliced in the iteration for the folio's node. Any LRU operation on that folio in between resolves its lruvec through the objcg, and thus takes the lru_lock of the wrong memcg, not the lru_lock of the list the folio is actually on. Fix this by selecting the objcg by folio_nid() at charge time, and by re-deriving it for the destination node in mem_cgroup_migrate() and mem_cgroup_replace_folio(). | ||||
| CVE-2026-89984 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix kernel address leakages in LBR stack Before Arch LBR gained CPL filtering support, a user-only branch stack could still contain kernel addresses. As a result, kernel branch records may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. For example, on Intel Tiger Lake, the following command can still report SYSRET/ERET entries with kernel-space from addresses: $ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \ ./perf bench syscall basic --loop 1000 | \ ./perf script -i - --fields brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' Total time: 0.000 [sec] 0.219000 usecs/op 4,566,210 ops/sec [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.551 MB - ] 0xffffffff93c001c8/0x7f12a2b1d647/P/-/-/16959/SYSRET/- 0xffffffff93c001c8/0x7f12a2b1d5c2/P/-/-/17535/SYSRET/- 0xffffffff93c01928/0x7f12a2861000/P/-/-/6719/ERET/- 0xffffffff93c01928/0x7f12a297a000/P/-/-/8575/ERET/- The problem is that intel_pmu_lbr_filter() does not fully validate the privilege level of sampled entries. It filters some mismatches based on the branch type and the to address, but it does not reject entries whose from address violates the requested branch privilege filter. Fix this by extending software filtering to validate both from and to addresses against br_sel. Any LBR entry contains kernel address does not match the requested user filter is dropped. This prevents kernel addresses from appearing in user-only branch stacks. | ||||
| CVE-2026-89983 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix debugfs UAF on adapter removal i2c_del_adapter() frees the adapter's debugfs directory before it unregisters the adapter device, but the new_device sysfs attribute stays writable until device_del(). A write racing with removal still reaches i2c_device_probe(), which passes the freed adap->debugfs to debugfs_create_dir() as the new client's parent: BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430 Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090 lookup_noperm_common+0x407/0x430 simple_start_creating+0x9c/0x110 debugfs_start_creating+0xdb/0x1a0 debugfs_create_dir+0x24/0x350 i2c_device_probe+0x814/0xbf0 It's technically possible to create a client after i2c_deregister_clients has run. That client will never be unregistered and make wait_for_completion hang. Close the window by removing the new_device attribute at the start of i2c_del_adapter(). device_remove_file() will drain any clients left. | ||||
| CVE-2026-89982 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: mux: Fix channel node leak on adapter add failure i2c_mux_add_adapter() takes a reference to the Device Tree channel node before registering the new adapter. If adapter registration fails, the error path frees the private data without dropping that reference. Release the channel node before freeing the private data. | ||||
| CVE-2026-89981 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Don't read GMID_EL1 when MTE is disabled __cpuinfo_store_cpu() gates the GMID_EL1 read on the raw ID_AA64PFR1_EL1, so it reads the register even when the kernel has disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5 in that case, and pKVM injects an UNDEF the host cannot handle: Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP pc : __cpuinfo_store_cpu+0xf4/0x264 Kernel panic - not syncing: Attempted to kill the idle task! Only pKVM reaches it, and only after a CPU is offlined and brought back online: its CPU_ON relay sets the host HCR before the CPU enters EL1, while plain nVHE sets it at CPUHP_AP_KVM_ONLINE. Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line override applied, and on CONFIG_ARM64_MTE, which no register reflects. The boot CPU stores its registers before init_cpu_features() strips an unsafe override, so clamp against the hardware value here too. | ||||
| CVE-2026-89980 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state. | ||||