Export limit exceeded: 378913 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378913 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72386 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective. | ||||
| CVE-2026-72349 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. | ||||
| CVE-2026-72326 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | ||||
| CVE-2026-72266 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: vesafb: fix memory leak in vesafb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller. But the string is not freed in vesafb_probe(). Fix that by freeing the option string after setup. | ||||
| CVE-2026-72258 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assign reserved memory with of_reserved_mem_device_init(), but the assignment is never released on driver removal or later probe failures. Register a devm cleanup action so the reserved memory assignment is released consistently, matching newer Mediatek AFE drivers. | ||||
| CVE-2026-72228 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if. | ||||
| CVE-2026-72215 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on 64-bit data) and control goes astray. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap, or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started, and the kernel will hang at: pid_max: default: 32768 minimum: 301 or somewhat later, but always before: cblist_init_generic: Setting adjustable number of callback queues. has been printed. It seems that only the prom_printf() entry point is affected. Of all the other entry points wired only rex_slot_address() and rex_gettcinfo() are called from a kernel thread other than the initial one, specifically kernel_init(), and they are leaf functions that do no business with the stack, having worked with no issue ever since 64-bit support was added for the platform back in 2002. To address this issue then, arrange for the stack to be switched in the o32 wrapper as required for prom_printf() only, by supplying call_o32() with a pointer to a chunk of initdata space, which is placed in the CKSEG0 32-bit compatibility segment, observing that prom_printf() is only called from console output handler and therefore with the console lock held, implying no need for this code to be reentrant. Other firmware entry points may be called with interrupts enabled and no lock held, and may therefore require that call_o32() be reentrant. They trigger no issue at this point and "if it ain't broke, don't fix it," so just leave them alone. | ||||
| CVE-2026-72187 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid self-deadlock during inode eviction An attribute-list update performed while allocating clusters can drop the last reference to the temporary attribute inode. Evicting that inode drops its reference to the base inode and can invoke ntfs_drop_big_inode() for the base inode from within the base inode's own writeback path. If the base inode is unlinked, ntfs_drop_big_inode() calls truncate_setsize(), which waits for the inode's folio writeback to complete. The same writeback worker is responsible for completing that writeback, so it waits for itself indefinitely. Prevent this self-deadlock by grabbing a reference to the base inode at the beginning of ntfs_writepages() and releasing it at the end of the function. This defers eviction until all bios have been submitted, allowing the wait for folio writeback to complete safely. | ||||
| CVE-2026-72174 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole() A PAGEMAP_SCAN ioctl requesting PM_SCAN_WP_MATCHING on a hugetlb VMA hangs the calling thread, unkillably, as soon as the scan reaches an unpopulated part of the range: do_pagemap_scan() walk_page_range() walk_hugetlb_range() hugetlb_vma_lock_read() # take the vma lock for read ... pagemap_scan_pte_hole() # ... ->pte_hole() for a hole uffd_wp_range() change_protection() hugetlb_change_protection() hugetlb_vma_lock_write() # ... and block taking it for write walk_hugetlb_range() holds the hugetlb vma lock for read across the whole walk. A present entry goes to ->hugetlb_entry(); an unpopulated one goes to ->pte_hole(), i.e. pagemap_scan_pte_hole(). To write-protect the hole that handler calls uffd_wp_range(), which on a hugetlb VMA reaches hugetlb_change_protection() and takes the same vma lock for write. The thread then blocks in down_write() waiting for the read lock it is itself holding. The populated path avoids this: pagemap_scan_hugetlb_entry() write-protects the entry inline under the page-table lock and never enters hugetlb_change_protection(). Do the same for holes. Fault in the page table and install the uffd-wp marker directly with make_uffd_wp_huge_pte() under the page-table lock, rather than routing through uffd_wp_range(). That is the same sequence hugetlb_change_protection() runs for an unpopulated entry, minus the vma write lock -- which is safe to skip because PMD sharing is disabled on uffd-wp VMAs (hugetlb_unshare_all_pmds() runs at registration), leaving nothing for that lock to serialise against. | ||||
| CVE-2026-72147 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma-pcie: Reject devices without driver data dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device. | ||||
| CVE-2026-13360 | 2 Wordpress, Wplegalpages | 2 Wordpress, Wplp Cookie Consent – Cookie Banner & Consent Management For Gdpr, Ccpa & Google Consent Mode | 2026-08-15 | 7.2 High |
| The Cookie Banner for GDPR / CCPA – WPLP Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'regionArray' parameter in all versions up to, and including, 4.3.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the site administrator has enabled the 'Support Google Consent Mode (GCM)' setting, which is disabled by default. Additionally, the AJAX handler performs no nonce or capability check, allowing any authenticated user including those with Subscriber-level access to overwrite the affected plugin setting. | ||||
| CVE-2026-15993 | 2 10web, Wordpress | 2 Form Maker By 10web – Mobile-friendly Drag & Drop Contact Form Builder, Wordpress | 2026-08-15 | 5.3 Medium |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to blind SQL Injection via '{username}' Placeholder in Dynamic-Choice Field WHERE Clause in all versions up to, and including, 1.15.44 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This requires that a form is configured with a DB-backed dynamic choice field whose WHERE template references the {username} placeholder, and the attacker must first set their own display_name to a SQL payload via the standard WordPress profile edit screen before triggering the fm_reload_input AJAX endpoint. | ||||
| CVE-2026-15453 | 2 Iqonicdesign, Wordpress | 2 Kivicare – Clinic & Patient Management System (ehr), Wordpress | 2026-08-15 | 6.5 Medium |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to generic SQL Injection via the 'searchTerm' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires a KiviCare custom role with the 'settings_view' permission (e.g., Doctor or Receptionist), meaning standard WordPress subscribers cannot exploit this without a KiviCare-assigned role. | ||||
| CVE-2026-73627 | 1 Jupyter | 1 Jupyterlab | 2026-08-15 | 7.1 High |
| JupyterLab (pip package 'jupyterlab') versions >=4.1.0,<=4.5.9 and >=4.6.0,<=4.6.1 contain a plugin manager lock-rule enforcement bypass. Two server-side enforcement gaps allow an authenticated user to circumvent administrator lock rules by making direct requests to the /lab/api/plugins endpoint, enabling or disabling plugins that were locked — including child plugins of multi-plugin extensions and plugins locked via the 'lock all' mechanism. This can impact data integrity and bypass hardening or restrictions (e.g., download/upload limits) implemented through locked plugins. Fixed in versions 4.6.2 and 4.5.10. | ||||
| CVE-2026-73623 | 2 Gitpython-developers, Gitpython Project | 2 Gitpython, Gitpython | 2026-08-15 | 7.5 High |
| GitPython before 3.1.54 contains an incomplete denylist in unsafe_git_clone_options that omits --template, allowing attackers to achieve arbitrary command execution during clone operations. Attackers can supply --template pointing to a directory containing malicious post-checkout hooks that execute when git clones the repository. | ||||
| CVE-2026-73619 | 2 Gitpython-developers, Gitpython Project | 2 Gitpython, Gitpython | 2026-08-15 | 6.5 Medium |
| GitPython before 3.1.57 contains an incomplete denylist in the unsafe_git_archive_options guard that omits --add-file and --add-virtual-file options. Attackers can supply these options to Repo.archive() to read arbitrary files from the filesystem and include them in the returned archive. | ||||
| CVE-2026-73507 | 1 Netty | 1 Netty | 2026-08-15 | 7.5 High |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-53789 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-15 | 6.5 Medium |
| rsync before 3.5.0 contains an improper path handling vulnerability that allows a malicious sender to expand the scope of --delete operations beyond the intended destination subtree by sending a crafted file list that causes rsync to reclassify implied parent directory entries or treat synthetic paths as the transfer root. Attackers can exploit multiple variants including implied parent reclassification, synthetic root path construction, legacy protocol behavior below version 30, and non-directory root handling to cause the receiver to delete files outside the authorized destination directory. | ||||
| CVE-2026-53784 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-15 | 7.1 High |
| rsync before 3.5.0 contains a path traversal vulnerability that allows remote clients to access files outside the intended module root when use chroot is disabled and the module root path or a component of it is a symlink. The daemon calls chdir() to the module root at session initialization without resolving symlinks via realpath() or equivalent, causing subsequent relative-path operations to reference files relative to the symlink target rather than the intended module root, enabling unauthorized file access. | ||||
| CVE-2026-49478 | 2026-08-15 | 8.7 High | ||
| Fulcio is a certificate authority for issuing code signing certificates for an OpenID Connect (OIDC) identity. Versions through 1.8.5 improperly follow cross-host redirects and attach Kubernetes ServiceAccount tokens during OIDC discovery, allowing a malicious or compromised issuer to perform blind SSRF, substitute and cache malicious JWKS keys, or disclose ServiceAccount tokens to external hosts. Version 1.8.6 blocks cross-host redirects, restricts token injection, and restricts local token loading. No known workarounds are available. | ||||