Export limit exceeded: 376257 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376257 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-65819 | 1 Gopacket | 1 Gopacket | 2026-08-11 | 7.5 High |
| gopacket provides packet processing capabilities for Go. Through version 1.7.0, multiple layer decoders use attacker-controlled lengths, counts, or offsets before validating them against packet buffers, allowing a crafted packet decoded through DecodingLayerParser or DecodeFromBytes to trigger an unrecovered panic and remotely deny service. A patch commit is available at 210f25f. | ||||
| CVE-2026-72917 | 1 Mintplexlabs | 1 Anything-llm | 2026-08-11 | 5.9 Medium |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. From 1.0.0 to 1.15.0, AnythingLLM's unauthenticated account-recovery flow in server/utils/PasswordRecovery/index.js uses recoverAccount() to deduplicate the raw recoveryCodes values before trimming them, so one valid code submitted twice with different surrounding whitespace can satisfy the two-code check. Each normalized value can also match the same stored hash instead of consuming a distinct hash. An attacker who knows the target username and one recovery code can call POST /api/system/recover-account in multi-user mode, receive a password-reset token, and use POST /api/system/reset-password to take over the account, including an administrator account. | ||||
| CVE-2026-46194 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-63872 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2021-47504 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||
| CVE-2026-8718 | 1 Zephyrproject | 1 Zephyr | 2026-08-11 | 8.4 High |
| tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the caller-supplied optval directly to mbedtls_ssl_get_peer_cid() without verifying the buffer was at least MBEDTLS_SSL_CID_OUT_LEN_MAX (default 32) bytes. mbedtls_ssl_get_peer_cid() copies the peer-negotiated DTLS Connection ID (length 1..MBEDTLS_SSL_CID_OUT_LEN_MAX) into that buffer without a destination-size parameter, so a caller-supplied optlen smaller than the CID causes a write of up to 31 bytes past the buffer end. In CONFIG_USERSPACE builds the getsockopt syscall verifier (z_vrfy_zsock_getsockopt) bounce-buffers the user's optval into a kernel allocation of exactly optlen bytes (k_usermode_alloc_from_copy -> z_thread_malloc), so an unprivileged user thread that passes a small optlen on a connected DTLS socket with Connection ID enabled induces a kernel-heap buffer overflow, with the overflowing content being the remote peer's CID. The defect requires CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID, an established DTLS session with a negotiated peer CID, and (for the kernel-crossing case) CONFIG_USERSPACE. Introduced when the TLS_DTLS_CID option was added (v3.5.0). The fix rejects callers whose optlen is below MBEDTLS_SSL_CID_OUT_LEN_MAX with -EINVAL. | ||||
| CVE-2026-19373 | 1 Phialsbasement | 1 Koboldcpp-mcp-server | 2026-08-11 | 5.3 Medium |
| A weakness has been identified in PhialsBasement KoboldCPP-MCP-Server 1.0.0. Affected by this issue is the function makeRequest of the file src/index.ts of the component BaseConfigSchema. Executing a manipulation of the argument apiUrl can lead to server-side request forgery. It is possible to launch the attack on the local host. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19368 | 1 Pv-bhat | 1 Gemsuite-mcp | 2026-08-11 | 3.3 Low |
| A vulnerability was found in PV-Bhat gemsuite-mcp 1.0.0. Affected by this issue is some unknown functionality of the file src/handlers/unified-gemini.ts of the component gemini_search/gemini_reason/gemini_process/gemini_analyze. The manipulation of the argument file_path/file_paths results in path traversal. The attack must be initiated from a local position. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19363 | 1 Lmammino | 1 Oidc-authorizer | 2026-08-11 | 5.3 Medium |
| A vulnerability was found in lmammino oidc-authorizer up to 0.4.0. Impacted is an unknown function of the file src/handler.rs of the component Lambda Authorizer. The manipulation results in sensitive information in log files. The attack can be executed remotely. `src/handler.rs` logs raw Authorization header values and complete bearer tokens/JWTs on authentication failure paths, potentially exposing credentials through CloudWatch Logs. `src/models.rs` serializes the complete validated JWT claims set with `serde_json::to_string(token_claims).unwrap()` and propagates it through `context["jwtClaims"]` to downstream integrations. This code performs serialization, not deserialization, and does not process attacker-controlled `jwtClaims` input. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-19358 | 1 3coresec | 1 Trapdoor | 2026-08-11 | 6.3 Medium |
| A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. Affected by this vulnerability is the function DefaultFunction. This manipulation causes improper access controls. The attack can be initiated remotely. The vendor was contacted early about this disclosure. | ||||
| CVE-2026-19353 | 1 Dedecms | 1 Dedecms | 2026-08-11 | 5 Medium |
| A vulnerability has been found in DedeCMS up to 5.7.118 UTF8SP2. The affected element is the function _4_Setup of the file install/index.php of the component Installation Wizard. Such manipulation leads to file inclusion. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is described as difficult. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-19347 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-11 | 6.3 Medium |
| A vulnerability was identified in itsourcecode Hospital Management System 1.0. This issue affects some unknown processing of the file /viewdoctor.php. Such manipulation of the argument delid leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-19342 | 1 Code-projects | 1 Task Management System | 2026-08-11 | 7.3 High |
| A vulnerability was detected in code-projects Task Management System 1.0. Affected is an unknown function of the file /index.php of the component Login. Performing a manipulation of the argument Password results in improper authentication. The attack is possible to be carried out remotely. The exploit is now public and may be used. | ||||
| CVE-2026-68085 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush. | ||||
| CVE-2026-68363 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened. | ||||
| CVE-2026-68368 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary. | ||||
| CVE-2026-68370 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the "emulated single-request FIFO" fast-path in dummy_queue() reuses for small IN transfers: it copies the caller's request into it (req->req = *_req) and queues it, treating list_empty(&fifo_req.queue) as "the slot is free". The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows the standard pattern: list_del_init(&req->queue) unlinks the request, then the lock is dropped and usb_gadget_giveback_request() invokes req->complete(). But list_del_init() makes fifo_req.queue look empty *before* the completion callback returns, so a concurrent dummy_queue() on another CPU sees the slot as free, reuses fifo_req and runs req->req = *_req -- overwriting req->complete while dummy_timer is mid-calling it. The indirect call then jumps to a clobbered pointer, causing a general protection fault / page fault in dummy_timer (syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an in-bounds memcpy on a live shared object, so KASAN cannot flag it. Add a fifo_req_busy bit covering the shared request's whole lifetime: set it in dummy_queue() when the FIFO fast-path takes fifo_req (making it the fast-path guard, replacing the list_empty(&fifo_req.queue) test), and clear it after the completion callback has returned, via a dummy_giveback() helper used at all four gadget-request giveback sites. The shared slot can no longer be reused until its completion callback has finished. | ||||
| CVE-2026-68376 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_hmacs array size in struct sctp_cookie The auth_hmacs array in struct sctp_cookie is supposed to store a complete SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr followed by N HMAC identifiers. However, the array size was calculated using an extra 2 bytes instead of sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers are configured, the HMAC-ALGO parameter stored in the endpoint is larger than the auth_hmacs buffer in the cookie. As a result, sctp_association_init() copies beyond the end of auth_hmacs when initializing the association, corrupting the adjacent auth_chunks field. This can lead to an invalid HMAC identifier being accepted and later cause an out-of-bounds read in sctp_auth_get_hmac(). Fix the array size calculation by including the full SCTP parameter header size. | ||||
| CVE-2026-68423 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy(). | ||||