Export limit exceeded: 371904 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (371904 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68206 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding. | ||||
| CVE-2025-68195 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode Running x86_match_min_microcode_rev() on a Zen5 CPU trips up KASAN for an out of bounds access. | ||||
| CVE-2025-68192 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 | ||||
| CVE-2025-68189 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix GEM free for imported dma-bufs Imported dma-bufs also have obj->resv != &obj->_resv. So we should check both this condition in addition to flags for handling the _NO_SHARE case. Fixes this splat that was reported with IRIS video playback: ------------[ cut here ]------------ WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm] CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : msm_gem_free_object+0x1f8/0x264 [msm] lr : msm_gem_free_object+0x138/0x264 [msm] sp : ffff800092a1bb30 x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08 x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6 x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200 x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020 x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032 x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8 Call trace: msm_gem_free_object+0x1f8/0x264 [msm] (P) drm_gem_object_free+0x1c/0x30 [drm] drm_gem_object_handle_put_unlocked+0x138/0x150 [drm] drm_gem_object_release_handle+0x5c/0xcc [drm] drm_gem_handle_delete+0x68/0xbc [drm] drm_gem_close_ioctl+0x34/0x40 [drm] drm_ioctl_kernel+0xc0/0x130 [drm] drm_ioctl+0x360/0x4e0 [drm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ Patchwork: https://patchwork.freedesktop.org/patch/676273/ | ||||
| CVE-2025-68184 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Disable AFBC support on Mediatek DRM driver Commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") added AFBC support to Mediatek DRM and enabled the 32x8/split/sparse modifier. However, this is currently broken on Mediatek MT8188 (Genio 700 EVK platform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used by default since Mesa v25.0. Kernel trace reports vblank timeouts constantly, and the render is garbled: ``` [CRTC:62:crtc-0] vblank wait timed out WARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c [...] Hardware name: MediaTek Genio-700 EVK (DT) Workqueue: events_unbound commit_work pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c lr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c sp : ffff80008337bca0 x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000 x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000 x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80 x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000a x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000 x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206b x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70 x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70 x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480 Call trace: drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P) drm_atomic_helper_commit_tail_rpm+0x64/0x80 commit_tail+0xa4/0x1a4 commit_work+0x14/0x20 process_one_work+0x150/0x290 worker_thread+0x2d0/0x3ec kthread+0x12c/0x210 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ``` Until this gets fixed upstream, disable AFBC support on this platform, as it's currently broken with upstream Mesa. | ||||
| CVE-2025-68183 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr Currently when both IMA and EVM are in fix mode, the IMA signature will be reset to IMA hash if a program first stores IMA signature in security.ima and then writes/removes some other security xattr for the file. For example, on Fedora, after booting the kernel with "ima_appraise=fix evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima, installing/reinstalling a package will not make good reference IMA signature generated. Instead IMA hash is generated, # getfattr -m - -d -e hex /usr/bin/bash # file: usr/bin/bash security.ima=0x0404... This happens because when setting security.selinux, the IMA_DIGSIG flag that had been set early was cleared. As a result, IMA hash is generated when the file is closed. Similarly, IMA signature can be cleared on file close after removing security xattr like security.evm or setting/removing ACL. Prevent replacing the IMA file signature with a file hash, by preventing the IMA_DIGSIG flag from being reset. Here's a minimal C reproducer which sets security.selinux as the last step which can also replaced by removing security.evm or setting ACL, #include <stdio.h> #include <sys/xattr.h> #include <fcntl.h> #include <unistd.h> #include <string.h> #include <stdlib.h> int main() { const char* file_path = "/usr/sbin/test_binary"; const char* hex_string = "030204d33204490066306402304"; int length = strlen(hex_string); char* ima_attr_value; int fd; fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644); if (fd == -1) { perror("Error opening file"); return 1; } ima_attr_value = (char*)malloc(length / 2 ); for (int i = 0, j = 0; i < length; i += 2, j++) { sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]); } if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) { perror("Error setting extended attribute"); close(fd); return 1; } const char* selinux_value= "system_u:object_r:bin_t:s0"; if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) { perror("Error setting extended attribute"); close(fd); return 1; } close(fd); return 0; } | ||||
| CVE-2025-68182 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link() This code frees "link" by calling kfree_rcu(link, rcu_head) and then it dereferences "link" to get the "link->fw_id". Save the "link->fw_id" first to avoid a potential use after free. | ||||
| CVE-2025-68181 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Remove calls to drm_put_dev() Since the allocation of the drivers main structure was changed to devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd should be done by devres. However, drm_put_dev() is still in the probe error and device remove paths. When the driver fails to probe warnings like the following are shown because devres is trying to drm_put_dev() after the driver already did it. [ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22 [ 5.649605] ------------[ cut here ]------------ [ 5.649607] refcount_t: underflow; use-after-free. [ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 (cherry picked from commit 3eb8c0b4c091da0a623ade0d3ee7aa4a93df1ea4) | ||||
| CVE-2025-68179 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible crashes. The problem is that kernel page tables are modified without flushing corresponding TLB entries. Even if it looks like the empty flush_tlb_all() implementation on s390 is the problem, it is actually a different problem: on s390 it is not allowed to replace an active/valid page table entry with another valid page table entry without the detour over an invalid entry. A direct replacement may lead to random crashes and/or data corruption. In order to invalidate an entry special instructions have to be used (e.g. ipte or idte). Alternatively there are also special instructions available which allow to replace a valid entry with a different valid entry (e.g. crdte or cspg). Given that the HVO code currently does not provide the hooks to allow for an implementation which is compliant with the s390 architecture requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is basically a revert of the original patch which enabled it. | ||||
| CVE-2025-68175 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix streaming cleanup on release The current implementation unconditionally calls mxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This can lead to situations where any release call (like from a simple "v4l2-ctl -l") may release a currently streaming queue when called on such a device. This is reproducible on an i.MX8MP board by streaming from an ISI capture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesink While this stream is running, querying the caps of the same device provokes the error state: v4l2-ctl -l -d /dev/videoX This results in the following trace: [ 155.452152] ------------[ cut here ]------------ [ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6 [ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT [ 157.064369] Hardware name: imx8mp_board_01 (DT) [ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi] [ 157.087126] sp : ffff800080003ee0 [ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000 [ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50 [ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000 [ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000 [ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000 [ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38 [ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000 [ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000 [ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200 [ 157.161850] Call trace: [ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P) [ 157.170319] __handle_irq_event_percpu+0x58/0x218 [ 157.175029] handle_irq_event+0x54/0xb8 [ 157.178867] handle_fasteoi_irq+0xac/0x248 [ 157.182968] handle_irq_desc+0x48/0x68 [ 157.186723] generic_handle_domain_irq+0x24/0x38 [ 157.191346] gic_handle_irq+0x54/0x120 [ 157.195098] call_on_irq_stack+0x24/0x30 [ 157.199027] do_interrupt_handler+0x88/0x98 [ 157.203212] el0_interrupt+0x44/0xc0 [ 157.206792] __el0_irq_handler_common+0x18/0x28 [ 157.211328] el0t_64_irq_handler+0x10/0x20 [ 157.215429] el0t_64_irq+0x198/0x1a0 [ 157.219009] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the vb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal of the manual cleanup from mxc_isi_video_release(). | ||||
| CVE-2025-68174 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: enhance kfd process check in switch partition current switch partition only check if kfd_processes_table is empty. kfd_prcesses_table entry is deleted in kfd_process_notifier_release, but kfd_process tear down is in kfd_process_wq_release. consider two processes: Process A (workqueue) -> kfd_process_wq_release -> Access kfd_node member Process B switch partition -> amdgpu_xcp_pre_partition_switch -> amdgpu_amdkfd_device_fini_sw -> kfd_node tear down. Process A and B may trigger a race as shown in dmesg log. This patch is to resolve the race by adding an atomic kfd_process counter kfd_processes_count, it increment as create kfd process, decrement as finish kfd_process_wq_release. v2: Put kfd_processes_count per kfd_dev, move decrement to kfd_process_destroy_pdds and bug fix. (Philip Yang) [3966658.307702] divide error: 0000 [#1] SMP NOPTI [3966658.350818] i10nm_edac [3966658.356318] CPU: 124 PID: 38435 Comm: kworker/124:0 Kdump: loaded Tainted [3966658.356890] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [3966658.362839] nfit [3966658.366457] RIP: 0010:kfd_get_num_sdma_engines+0x17/0x40 [amdgpu] [3966658.366460] Code: 00 00 e9 ac 81 02 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 48 8b 4f 08 48 8b b7 00 01 00 00 8b 81 58 26 03 00 99 <f7> be b8 01 00 00 80 b9 70 2e 00 00 00 74 0b 83 f8 02 ba 02 00 00 [3966658.380967] x86_pkg_temp_thermal [3966658.391529] RSP: 0018:ffffc900a0edfdd8 EFLAGS: 00010246 [3966658.391531] RAX: 0000000000000008 RBX: ffff8974e593b800 RCX: ffff888645900000 [3966658.391531] RDX: 0000000000000000 RSI: ffff888129154400 RDI: ffff888129151c00 [3966658.391532] RBP: ffff8883ad79d400 R08: 0000000000000000 R09: ffff8890d2750af4 [3966658.391532] R10: 0000000000000018 R11: 0000000000000018 R12: 0000000000000000 [3966658.391533] R13: ffff8883ad79d400 R14: ffffe87ff662ba00 R15: ffff8974e593b800 [3966658.391533] FS: 0000000000000000(0000) GS:ffff88fe7f600000(0000) knlGS:0000000000000000 [3966658.391534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3966658.391534] CR2: 0000000000d71000 CR3: 000000dd0e970004 CR4: 0000000002770ee0 [3966658.391535] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3966658.391535] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [3966658.391536] PKRU: 55555554 [3966658.391536] Call Trace: [3966658.391674] deallocate_sdma_queue+0x38/0xa0 [amdgpu] [3966658.391762] process_termination_cpsch+0x1ed/0x480 [amdgpu] [3966658.399754] intel_powerclamp [3966658.402831] kfd_process_dequeue_from_all_devices+0x5b/0xc0 [amdgpu] [3966658.402908] kfd_process_wq_release+0x1a/0x1a0 [amdgpu] [3966658.410516] coretemp [3966658.434016] process_one_work+0x1ad/0x380 [3966658.434021] worker_thread+0x49/0x310 [3966658.438963] kvm_intel [3966658.446041] ? process_one_work+0x380/0x380 [3966658.446045] kthread+0x118/0x140 [3966658.446047] ? __kthread_bind_mask+0x60/0x60 [3966658.446050] ret_from_fork+0x1f/0x30 [3966658.446053] Modules linked in: kpatch_20765354(OEK) [3966658.455310] kvm [3966658.464534] mptcp_diag xsk_diag raw_diag unix_diag af_packet_diag netlink_diag udp_diag act_pedit act_mirred act_vlan cls_flower kpatch_21951273(OEK) kpatch_18424469(OEK) kpatch_19749756(OEK) [3966658.473462] idxd_mdev [3966658.482306] kpatch_17971294(OEK) sch_ingress xt_conntrack amdgpu(OE) amdxcp(OE) amddrm_buddy(OE) amd_sched(OE) amdttm(OE) amdkcl(OE) intel_ifs iptable_mangle tcm_loop target_core_pscsi tcp_diag target_core_file inet_diag target_core_iblock target_core_user target_core_mod coldpgs kpatch_18383292(OEK) ip6table_nat ip6table_filter ip6_tables ip_set_hash_ipportip ip_set_hash_ipportnet ip_set_hash_ipport ip_set_bitmap_port xt_comment iptable_nat nf_nat iptable_filter ip_tables ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sn_core_odd(OE) i40e overlay binfmt_misc tun bonding(OE) aisqos(OE) aisqo ---truncated--- | ||||
| CVE-2025-68171 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure XFD state on signal delivery Sean reported [1] the following splat when running KVM tests: WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70 Call Trace: <TASK> fpu__clear_user_states+0x9c/0x100 arch_do_signal_or_restart+0x142/0x210 exit_to_user_mode_loop+0x55/0x100 do_syscall_64+0x205/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chao further identified [2] a reproducible scenario involving signal delivery: a non-AMX task is preempted by an AMX-enabled task which modifies the XFD MSR. When the non-AMX task resumes and reloads XSTATE with init values, a warning is triggered due to a mismatch between fpstate::xfd and the CPU's current XFD state. fpu__clear_user_states() does not currently re-synchronize the XFD state after such preemption. Invoke xfd_update_state() which detects and corrects the mismatch if there is a dynamic feature. This also benefits the sigreturn path, as fpu__restore_sig() may call fpu__clear_user_states() when the sigframe is inaccessible. [ dhansen: minor changelog munging ] | ||||
| CVE-2025-68170 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Do not kfree() devres managed rdev Since the allocation of the drivers main structure was changed to devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling kfree() on it. This fixes things exploding if the driver probe fails and devres cleans up the rdev after we already free'd it. (cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b) | ||||
| CVE-2025-68168 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix uninitialized waitqueue in transaction manager The transaction manager initialization in txInit() was not properly initializing TxBlock[0].waitor waitqueue, causing a crash when txEnd(0) is called on read-only filesystems. When a filesystem is mounted read-only, txBegin() returns tid=0 to indicate no transaction. However, txEnd(0) still gets called and tries to access TxBlock[0].waitor via tid_to_tblock(0), but this waitqueue was never initialized because the initialization loop started at index 1 instead of 0. This causes a 'non-static key' lockdep warning and system crash: INFO: trying to register non-static key in txEnd Fix by ensuring all transaction blocks including TxBlock[0] have their waitqueues properly initialized during txInit(). | ||||
| CVE-2025-68167 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix invalid pointer access in debugfs If the memory allocation in gpiolib_seq_start() fails, the s->private field remains uninitialized and is later dereferenced without checking in gpiolib_seq_stop(). Initialize s->private to NULL before calling kzalloc() and check it before dereferencing it. | ||||
| CVE-2025-40362 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix multifs mds auth caps issue The mds auth caps check should also validate the fsname along with the associated caps. Not doing so would result in applying the mds auth caps of one fs on to the other fs in a multifs ceph cluster. The bug causes multiple issues w.r.t user authentication, following is one such example. Steps to Reproduce (on vstart cluster): 1. Create two file systems in a cluster, say 'fsname1' and 'fsname2' 2. Authorize read only permission to the user 'client.usr' on fs 'fsname1' $ceph fs authorize fsname1 client.usr / r 3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2' $ceph fs authorize fsname2 client.usr / rw 4. Update the keyring $ceph auth get client.usr >> ./keyring With above permssions for the user 'client.usr', following is the expectation. a. The 'client.usr' should be able to only read the contents and not allowed to create or delete files on file system 'fsname1'. b. The 'client.usr' should be able to read/write on file system 'fsname2'. But, with this bug, the 'client.usr' is allowed to read/write on file system 'fsname1'. See below. 5. Mount the file system 'fsname1' with the user 'client.usr' $sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/ 6. Try creating a file on file system 'fsname1' with user 'client.usr'. This should fail but passes with this bug. $touch /kmnt_fsname1_usr/file1 7. Mount the file system 'fsname1' with the user 'client.admin' and create a file. $sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin $echo "data" > /kmnt_fsname1_admin/admin_file1 8. Try removing an existing file on file system 'fsname1' with the user 'client.usr'. This shoudn't succeed but succeeds with the bug. $rm -f /kmnt_fsname1_usr/admin_file1 For more information, please take a look at the corresponding mds/fuse patch and tests added by looking into the tracker mentioned below. v2: Fix a possible null dereference in doutc v3: Don't store fsname from mdsmap, validate against ceph_mount_options's fsname and use it v4: Code refactor, better warning message and fix possible compiler warning [ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ] | ||||
| CVE-2025-40358 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: stacktrace: Disable KASAN checks for non-current tasks Unwinding the stack of a task other than current, KASAN would report "BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460" There is a same issue on x86 and has been resolved by the commit 84936118bdf3 ("x86/unwind: Disable KASAN checks for non-current tasks") The solution could be applied to RISC-V too. This patch also can solve the issue: https://seclists.org/oss-sec/2025/q4/23 [pjw@kernel.org: clean up checkpatch issues] | ||||
| CVE-2025-40356 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ... | ||||
| CVE-2025-40354 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: increase max link count and fix link->enc NULL pointer access [why] 1.) dc->links[MAX_LINKS] array size smaller than actual requested. max_connector + max_dpia + 4 virtual = 14. increase from 12 to 14. 2.) hw_init() access null LINK_ENC for dpia non display_endpoint. (cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45) | ||||
| CVE-2025-40350 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run. Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same. This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it. To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes. | ||||