Export limit exceeded: 24396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90092 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case. | ||||
| CVE-2026-90096 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() captures pos before generic_write_checks(), which moves ki_pos to EOF for O_APPEND writes: fuse_direct_write_iter() { pos = iocb->ki_pos; /* 0 (user-supplied) */ generic_write_checks(); /* ki_pos -> EOF */ fuse_direct_io(); /* writes at EOF, correct */ invalidate(pos, pos + res); /* [0, res) -- wrong */ } The post-write invalidation targets a stale range instead of the actual written range at EOF. This can cause data inconsistency when the file size is not page-aligned. The tail page straddling EOF has a valid portion before EOF that concurrent readers can fault back in during the DIO write window: Tail page (file size X not page-aligned): page_start X (EOF) page_end |--- valid data ----|-- stale --| CPU0 (O_APPEND DIO writer) CPU1 (buffered reader) -------------------------- ---------------------- invalidate [X, X+len) tail page evicted FUSE_WRITE in flight ... read [page_start, X) tail page re-faulted [X, page_end) = stale FUSE_WRITE completes i_size = X + len invalidate [0, len) <- WRONG tail page still cached read [X, X+len) hits stale tail page returns old data Fix by reading pos back from iocb->ki_pos after generic_write_checks(), as generic_file_direct_write() does. Also fix a typo in the comment ("may have" -> "may have competed"). | ||||
| CVE-2026-90104 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | ||||
| CVE-2026-90113 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. | ||||
| CVE-2026-90118 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end. | ||||
| CVE-2026-90123 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate. | ||||
| CVE-2026-90125 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv(). | ||||
| CVE-2026-90134 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping. | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-87886 | 2 Acronis, Linux | 5 Acronis Backup, Backup Extension For Plesk, Backup Plugin For Cpanel \& Whm and 2 more | 2026-09-18 | N/A |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. | ||||
| CVE-2026-90107 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op. | ||||
| CVE-2026-90109 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the default VQ unconfigured (for gred), and drive >4 GiB of queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len, or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32, admission keeps succeeding, and the queue grows unboundedly to OOM. | ||||
| CVE-2026-90115 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||
| CVE-2026-90129 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued. | ||||
| CVE-2026-90130 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90136 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | ||||
| CVE-2026-90137 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values]. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||