Export limit exceeded: 25995 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25995 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99084 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock. | ||||
| CVE-2026-99090 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) | ||||
| CVE-2026-99092 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map(). | ||||
| CVE-2026-98908 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-99061 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface. | ||||
| CVE-2026-99067 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too. | ||||
| CVE-2026-99086 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed. | ||||
| CVE-2026-98905 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||
| CVE-2026-98907 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes. | ||||
| CVE-2026-98909 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails. | ||||
| CVE-2026-98910 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning. | ||||
| CVE-2026-99052 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE. | ||||
| CVE-2026-99053 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: hold a reference to nodes found by link name tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG: KASAN: slab-use-after-free in _raw_read_lock_bh Write of size 4 at addr ffff88807e06f008 by task poc/92 Call Trace: _raw_read_lock_bh kernel/locking/spinlock.c:287 tipc_nl_node_set_link net/tipc/node.c:2475 genl_family_rcv_msg_doit net/netlink/genetlink.c:1114 genl_rcv_msg net/netlink/genetlink.c:1209 netlink_rcv_skb net/netlink/af_netlink.c:2575 Allocated by task 0: tipc_node_create net/tipc/node.c:539 tipc_node_check_dest net/tipc/node.c:1196 tipc_disc_rcv net/tipc/discover.c:252 Freed by task 92: kfree mm/slub.c:6801 rcu_core kernel/rcu/tree.c:2919 Last potentially related work creation: __call_rcu_common.constprop.0 kernel/rcu/tree.c:3181 tipc_node_timeout net/tipc/node.c:814 Acquire a reference to the selected node with kref_get_unless_zero() before leaving RCU, returning NULL if the node has already been released. Release that reference on every caller exit after the last node access, including transmission in LINK_SET. Keep the existing link lookup order and locking so concurrent link removal still takes the existing error paths. | ||||
| CVE-2026-99054 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: destroy topsrv workqueues before closing connections tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() after that flag is cleared, and drop idr_lock when the teardown walk finds no connection, so an in-flight subscription event cannot pin idr_in_use while the walk holds the lock. v3 supersedes the narrower in-thread diff Tung Quang Nguyen posted on 2026-09-23. It keeps his teardown order and adds the lookup refusal and the empty-idr unlock. | ||||
| CVE-2026-99059 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wireguard: noise: reject response consumption after intermediate initiation Two threads begin processing the identical response message, received twice. The first thread, A, runs. While it's running, the second one, B, gets partway through, and during that slow calculation, or even while blocking on down_write(), A completes and then also a handshake initiation that's already been queued up runs in thread C, which itself takes that same down_write(). The handshake initiation creation succeeds, and sets the state back to waiting-for-response, and calls up_write(), at which point thread B resumes, because either its finished its calculations or was finally allowed to acquire down_write(). Thread B then copies the state back to the peer, and begins a new session, using that state, which is the same session as the one made in thread A. Thread A Thread B Thread C down_read() sA = handshake->state memcpy(cA, handshake->crypto) up_read() if (sA != 1) goto fail slow_crypto(cA) down_read() sB = handshake->state memcpy(cB, handshake->crypto) up_read() if (sB != 1) goto fail slow_crypto(cB) down_write() if (sA != handshake->state) goto fail memcpy(handshake->crypto, cA) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() down_write() slow_crypto(handshake->crypto) handshake->state = 1 up_write() down_write() if (sB != handshake->state) goto fail memcpy(handshake->crypto, cB) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() This seems basically impossible to hit in a meaningful way in practice, but ensure that it absolutely cannot happen by comparing the ephemeral private key that's on the stack with the latest one that the peer's handshake state has. | ||||
| CVE-2026-99060 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset. | ||||
| CVE-2026-99062 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit. | ||||
| CVE-2026-99063 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root. | ||||
| CVE-2026-99064 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together. | ||||
| CVE-2026-99065 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem. | ||||