| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in V8 in Google Chrome prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Platform in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Chromecast in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the Layer method of PerlMagick. An attacker who supplies a crafted list of images can trigger memory access after deallocation, resulting in a crash (denial of service). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| Use after free in Skia in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()
When a container exits, the following BUG_ON() is occasionally triggered:
==================================================================
VFS: Busy inodes after unmount of sdb (ext4)
------------[ cut here ]------------
kernel BUG at fs/super.c:695!
CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : generic_shutdown_super+0xf0/0x100
lr : generic_shutdown_super+0xf0/0x100
Call trace:
generic_shutdown_super+0xf0/0x100
kill_block_super+0x20/0x48
ext4_kill_sb+0x28/0x60
deactivate_locked_super+0x54/0x130
deactivate_super+0x84/0xa0
cleanup_mnt+0xa4/0x140
__cleanup_mnt+0x18/0x28
task_work_run+0x78/0xe0
do_notify_resume+0x204/0x240
==================================================================
The root cause is a race between cgroup_writeback_umount() and
inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between
inode_prepare_wbs_switch() returning true and the subsequent
wb_queue_isw() call. Following is the process that triggers the issue:
CPU A (umount) | CPU B (writeback)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
inode_switch_wbs/cleanup_offline_cgwb
atomic_inc(&isw_nr_in_flight)
inode_prepare_wbs_switch
-> passes SB_ACTIVE check
__iget(inode)
generic_shutdown_super
sb->s_flags &= ~SB_ACTIVE
cgroup_writeback_umount(sb)
smp_mb()
atomic_read(&isw_nr_in_flight)
rcu_barrier()
-> no pending RCU callbacks
flush_workqueue(isw_wq)
-> nothing queued, returns
evict_inodes(sb)
-> Inode skipped as isw still holds a ref.
sop->put_super(sb)
/* destroys percpu counters */
-> VFS: Busy inodes after unmount!
wb_queue_isw()
queue_work(isw_wq, ...)
/* later in work function */
inode_switch_wbs_work_fn
process_inode_switch_wbs
iput() -> evict
percpu_counter_dec() // UAF!
Fix this by extending the RCU read-side critical section in
inode_switch_wbs() and cleanup_offline_cgwb() to cover from
inode_prepare_wbs_switch() through wb_queue_isw(). Since there is
no sleep in this window, rcu_read_lock() can be used. Then add a
synchronize_rcu() in cgroup_writeback_umount() before the existing
rcu_barrier(), so that all in-flight switchers that have passed the
SB_ACTIVE check have completed queue_work() before flush_workqueue()
is called.
The existing rcu_barrier() is intentionally retained so this fix can
be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that
still queue switches via queue_rcu_work(). It is a no-op on current
mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on
wb->list_lock when switching inodes")) and is removed in a follow-up
patch. |
| ImageMagick before 7.1.2-30 and 6.9.x before 6.9.13-55 contains a heap-use-after-free vulnerability in the GetList method of PerlMagick. A crafted call to the GetList method can trigger the use-after-free, resulting in a crash (denial of service). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Fix use-after-free on remove
KASAN reports a slab-use-after-free in __media_entity_remove_link()
during rmmod of imx8_isi:
BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650
Read of size 2 at addr ffff0000d47cb02a by task rmmod/724
Call trace:
__media_entity_remove_link+0x608/0x650
__media_entity_remove_links+0x78/0x144
__media_device_unregister_entity+0x150/0x280
media_device_unregister_entity+0x48/0x68
v4l2_device_unregister_subdev+0x158/0x300
v4l2_async_unbind_subdev_one+0x22c/0x358
v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0
v4l2_async_nf_unregister+0x5c/0x14c
mxc_isi_remove+0x124/0x2a0 [imx8_isi]
Allocated by task 249:
__kmalloc_noprof+0x27c/0x690
mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi]
Freed by task 724:
kfree+0x1e4/0x5b0
mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi]
mxc_isi_remove+0x11c/0x2a0 [imx8_isi]
The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup()
before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media
entity pads, but the subsequent v4l2 cleanup still tries to remove
media links that reference those pads.
Fix this by calling mxc_isi_v4l2_cleanup() before
mxc_isi_crossbar_cleanup() to ensure all media entities are properly
unregistered while the pads are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: resolve SWN tcon from live registrations
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or incrementing tc_count through
swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while
holding cifs_swnreg_idr_mutex also violates the documented CIFS lock
order.
Fix this by making the registration store only the stable witness
identity: id, net name, share name, and notify flags. When a notify
arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,
then find and pin a live witness tcon that currently matches the net/share
pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification
path uses that pinned tcon directly and drops the reference when done.
Registration and unregister messages now use the live tcon passed by the
caller instead of a cached tcon in the registration. The final unregister
send is folded into cifs_swn_unregister() while the registration is still
protected by cifs_swnreg_idr_mutex. This removes the previous
find/drop/reacquire raw-pointer window. The release path only removes the
idr entry and frees the stable identity strings.
This preserves the intended one-registration/many-tcon behavior: a
registration id represents a net/share pair, and notify handling acts on a
live representative selected at use time. It also preserves CLIENT_MOVE
ordering for the representative tcon because the old-IP unregister is sent
before cifs_swn_register() sends the new-IP register. |
