| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper neutralization of special elements used in a command ('command injection') in Copilot Chat (Microsoft Edge) allows an unauthorized attacker to execute code over a network. |
| NVIDIA TensorRT-LLM contains a vulnerability in the OpenAI-compatible inference API, where an attacker could cause allocation of GPU resources without limits or throttling. A successful exploit of this vulnerability might lead to denial of service. |
| Allocation of Resources Without Limits and Throttling and Sensitive Information in Resource Not Removed Before Reuse in the ASUS System Control Interface driver and ASUS Business Manager allow a local administrator to disclose sensitive information via crafted IOCTL requests, which, in severe cases, may lead to a Denial of Service (DoS) on the system.
Refer to the '
Security Update for ASUS System Control Interface ' section on the ASUS Security Advisory for more information. |
| An issue in Generic OEM UZ801_v2.1 4G LTE Router V3.4.3 allows a remote attacker to execute arbitrary code via the sbin/adbd component |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl()
holds three cleanup-tracked resources before calling kvcalloc():
the drm_gem_object reference from drm_gem_object_lookup(), the
drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and
the drm_exec lock on the per-process VM root page directory via
amdgpu_vm_lock_pd(). All three are released by the out_exec
label that every other error path in this function jumps to.
The kvcalloc() failure path returns -ENOMEM directly, skipping
out_exec and leaking all three.
The leaked per-process VM root PD dma_resv lock is the
load-bearing leak: any subsequent operation on the same VM
(further GEM ops, command-submission, eviction, TTM shrinker
callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is
DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local
denial of service against the caller's GPU context, reachable
by any process with /dev/dri/renderD* access.
Route the failure through out_exec so drm_exec_fini() and
drm_gem_object_put() run.
Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega
(Lucienne): the failing ioctl returns -ENOMEM and a second
GET_MAPPING_INFO on the same fd then blocks in
drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the
caller does not reap the task; the fd-release path during
process exit goes through amdgpu_gem_object_close() ->
drm_exec_prepare_obj() on the same lock, leaving the task in D
state until the box is rebooted. The patched kernel was not
rebuilt and re-tested on this hardware; the fix is mechanical.
Tested on a single Lucienne / Vega box only.
Ziyi Guo posted an independent INT_MAX-bound check for
args->num_entries in the same branch [1]; the two patches are
complementary and can land in either order.
(cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: free scan_mask on buffer release
The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer:
hw-consumer: remove redundant scan_mask flexible array").
Before that change, the scan mask storage was embedded in struct
hw_consumer_buffer, so iio_hw_buf_release() could free the whole
allocation with a single kfree(hw_buf).
That commit moved the scan mask to a separate bitmap_zalloc() allocation
stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged.
Free the scan mask in iio_hw_buf_release() before freeing the buffer
wrapper. |
| An unauthenticated command injection vulnerability in the /goform/fast_setting_internet_set endpoint of Tenda AC18 v15.03.05.05 allows attackers to execute arbitrary commands via a crafted payload injected into the mac parameter. |
| In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, the TNEF decoder was subject to denial of service via a crafted compressed-RTF size. |
| An issue in Open Source GPT Researcher v3.3.7 allows attackers to execute arbitrary commands on a victim system via user interaction with a crafted HTML page. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf()
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled. |
| FFmpeg through 8.1.2, fixed in commit 5d7112c, contains an uncontrolled resource consumption vulnerability in the IAMF demuxer that allows an unauthenticated attacker to cause multi-gigabyte memory allocation from a 17-byte input file by supplying a crafted count_label field. The mix_presentation_obu() function in libavformat/iamf_parse.c calls av_calloc(count_label, sizeof(*language_label)) with an attacker-controlled value before validating available OBU data, enabling an allocation amplification of approximately 126 million bytes per input byte that exhausts process memory or triggers an OOM-kill during format probing. |
| An unauthenticated attacker could trigger an Out of Memory condition to crash the Java process for RHCS by repeatedly sending HTTP requests to the TLS endpoint. Depending on how the RHCS server is configured, a manual intervention to restart it may prove necessary. |
| Vulnerability in Oracle Java SE (component: JavaFX). The supported version that is affected is Oracle Java SE: 8u491. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Replication). Supported versions that are affected are MySQL Server: 8.4.0-8.4.10, 9.7.0-9.7.1; MySQL Cluster: 8.0.0-8.0.47, 8.4.0-8.4.10 and 9.7.0-9.7.1. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.4 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in Oracle GoldenGate (component: Receiver Service Executable). Supported versions that are affected are 19.1.0.0.0-19.30.0.0, 21.3-21.21 and 23.4-23.26.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle GoldenGate. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle GoldenGate. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
