Search
Search Results (20 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64244 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. | ||||
| CVE-2026-64513 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). | ||||
| CVE-2026-45787 | 2 Electerm, Electerm Project | 2 Electerm, Electerm | 2026-06-03 | 9.1 Critical |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5. | ||||
| CVE-2026-9370 | 1 Ulisesbocchio | 1 Jasypt-spring-boot | 2026-05-29 | 3.7 Low |
| A weakness has been identified in ulisesbocchio jasypt-spring-boot up to 3.0.5/4.0.4. Affected by this vulnerability is the function getSecretKeySaltGenerator of the file jasypt-spring-boot/src/main/java/com/ulisesbocchio/jasyptspringboot/encryptor/SimpleGCMConfig.java of the component Password Hash Handler. Executing a manipulation can lead to use of a one-way hash with a predictable salt. The attack can be launched remotely. The attack requires a high level of complexity. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-45027 | 1 Labredescefetrj | 1 Wegia | 2026-05-28 | 5.9 Medium |
| WeGIA is a web manager for charitable institutions. In versions prior to 3.7.3, when a user logs in, html/login.php hashes the submitted password using PHP's hash() function with the SHA-256 algorithm and no salt before comparing it to the stored value. The password change flow in controle/FuncionarioControle.php follows the same pattern. SHA-256 is a general-purpose cryptographic hash built for speed, not password storage. Without a salt, identical passwords produce identical digests, making the entire hash database vulnerable to a single precomputed rainbow table lookup. This vulnerability is fixed in 3.7.3. | ||||
| CVE-2026-46089 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio(). | ||||
| CVE-2026-23179 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready() When the socket is closed while in TCP_LISTEN a callback is run to flush all outstanding packets, which in turns calls nvmet_tcp_listen_data_ready() with the sk_callback_lock held. So we need to check if we are in TCP_LISTEN before attempting to get the sk_callback_lock() to avoid a deadlock. | ||||
| CVE-2025-27408 | 2026-04-15 | 4.8 Medium | ||
| Manifest offers users a one-file micro back end. Prior to version 4.9.2, Manifest employs a weak password hashing implementation that uses SHA3 without a salt. This exposes user passwords to a higher risk of being cracked if an attacker gains access to the database. Without the use of a salt, identical passwords across multiple users will result in the same hash, making it easier for attackers to identify and exploit patterns, thereby accelerating the cracking process. Version 4.9.2 fixes the issue. | ||||
| CVE-2025-5922 | 1 Tsplus | 1 Tsplus Remote Access | 2026-04-15 | N/A |
| Access to TSplus Remote Access Admin Tool is restricted to administrators (unless "Disable UAC" option is enabled) and requires a PIN code. In versions below v18.40.6.17 the PIN's hash is stored in a system registry accessible to regular users, making it possible to perform a brute-force attack using rainbow tables, since the hash is not salted. LTS (Long-Term Support) versions also received patches in v17.2025.6.27 and v16.2025.6.27 releases. | ||||
| CVE-2024-36440 | 1 Swissphone | 1 Dical-red | 2026-04-15 | 6.8 Medium |
| An issue was discovered on Swissphone DiCal-RED 4009 devices. An attacker with access to the file /etc/deviceconfig may recover the administrative device password via password-cracking methods, because unsalted MD5 is used. | ||||
| CVE-2025-10205 | 1 Abb | 1 Flxeon | 2026-04-15 | 8.8 High |
| Use of a One-Way Hash with a Predictable Salt vulnerability in ABB FLXEON.This issue affects FLXEON: through 9.3.5. and newer versions | ||||
| CVE-2025-53884 | 2 Neuvector, Suse | 2 Neuvector, Neuvector | 2026-04-15 | 5.3 Medium |
| NeuVector stores user passwords and API keys using a simple, unsalted hash. This method is vulnerable to rainbow table attack (offline attack where hashes of known passwords are precomputed). | ||||
| CVE-2023-1430 | 1 Wpmanageninja | 1 Fluentcrm | 2026-04-08 | 6.5 Medium |
| The FluentCRM - Marketing Automation For WordPress plugin for WordPress is vulnerable to unauthorized modification of data in versions up to, and including, 2.8.01 due to the use of an MD5 hash without a salt to control subscriptions. This makes it possible for unauthenticated attackers to unsubscribe users from lists and manage subscriptions, granted they gain access to any targeted subscribers email address. | ||||
| CVE-2025-36253 | 2 Ibm, Linux | 2 Concert, Linux Kernel | 2026-02-11 | 5.9 Medium |
| IBM Concert 1.0.0 through 2.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. | ||||
| CVE-2025-34208 | 1 Vasion | 3 Print Application, Virtual Appliance Application, Virtual Appliance Host | 2025-11-17 | 7.5 High |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host and Application (VA/SaaS deployments) store user passwords using unsalted SHA-512 hashes with a fall-back to unsalted SHA-1. The hashing is performed via PHP's `hash()` function in multiple files (server_write_requests_users.php, update_database.php, legacy/Login.php, tests/Unit/Api/IdpControllerTest.php). No per-user salt is used and the fast hash algorithms are unsuitable for password storage. An attacker who obtains the password database can recover cleartext passwords via offline dictionary or rainbow table attacks. The vulnerable code also contains logic that migrates legacy SHA-1 hashes to SHA-512 on login, further exposing users still on the old hash. This vulnerability was partially resolved, but still present within the legacy authentication platform. | ||||
| CVE-2020-25164 | 1 Bbraun | 2 Datamodule Compactplus, Spacecom | 2025-04-16 | 6.5 Medium |
| A vulnerability in the B. Braun Melsungen AG SpaceCom Version L81/U61 and earlier, and the Data module compactplus Versions A10 and A11 allows attackers to recover user credentials of the administrative interface. | ||||
| CVE-2023-33838 | 1 Ibm | 1 Security Verify Governance | 2025-03-04 | 4.4 Medium |
| IBM Security Verify Governance 10.0.2 Identity Manager uses a one-way cryptographic hash against an input that should not be reversible, such as a password, but the product does not also use a salt as part of the input. | ||||
| CVE-2021-21253 | 1 Onlinevotingsystem Project | 1 Onlinevotingsystem | 2024-11-21 | 5.8 Medium |
| OnlineVotingSystem is an open source project hosted on GitHub. OnlineVotingSystem before version 1.1.2 hashes user passwords without a salt, which is vulnerable to dictionary attacks. Therefore there is a threat of security breach in the voting system. Without a salt, it is much easier for attackers to pre-compute the hash value using dictionary attack techniques such as rainbow tables to crack passwords. This problem is fixed and published in version 1.1.2. A long randomly generated salt is added to the password hash function to better protect passwords stored in the voting system. | ||||
| CVE-2020-16244 | 1 Ge | 1 Asset Performance Management Classic | 2024-11-21 | 7.2 High |
| GE Digital APM Classic, Versions 4.4 and prior. Salt is not used for hash calculation of passwords, making it possible to decrypt passwords. This design flaw, along with the IDOR vulnerability, puts the entire platform at high risk because an authenticated user can retrieve all user account data and then retrieve the actual passwords. | ||||
| CVE-2024-8453 | 1 Planet | 4 Gs-4210-24p2s, Gs-4210-24p2s Firmware, Gs-4210-24pl4c and 1 more | 2024-10-04 | 4.9 Medium |
| Certain switch models from PLANET Technology use an insecure hashing function to hash user passwords without being salted. Remote attackers with administrator privileges can read configuration files to obtain the hash values, and potentially crack them to retrieve the plaintext passwords. | ||||
Page 1 of 1.