| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| A use-after-free type vulnerability was found in libsoup, in the soup_message_headers_get_content_disposition() function. This flaw allows a malicious HTTP client to cause memory corruption in the libsoup server. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in offloaded map/prog info fill
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed. |
| Use of stack memory after free vulnerability in Avast Antivirus when scanning a malformed Windows PE file may allow Denial-of-Service of the antivirus process.
This issue affects Avast Antivirus, AVG Antivirus, Norton Antivirus, Avast One, and Avast Business Antivirus on Windows, macOS, and Linux for virus definition builds before VPS 25022500.
The affected scanning logic is delivered through a shared Gen Digital virus definition update stream. The same stream feeds the consumer antivirus products listed in this advisory and other Gen Digital products that embed the same engine. Mitigation flows through this update channel; installations at or above the listed build are not vulnerable regardless of which product consumes the stream. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain AppArmor SAUCE patches which incorrectly attempt to free a pointer which was not previously kmalloc()d, while at the same time leaking allocated memory. The bug can be triggered by an unprivileged local user and can result in the corruption of slab metadata and could lead to resource exhaustion. |
| Free of memory not on the heap in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| A vulnerability classified as critical was found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected by this vulnerability is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to free of memory not on the heap. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. |
| SAP MDM Server Read function allows an attacker to send specially crafted packets which could trigger a memory read access violation in the server process that would then fail and exit unexpectedly causing high impact on availability with no impact on confidentiality and integrity of the application. |
| SAP MDM Server allows an attacker to gain control of existing client sessions and execute certain functions without having to re-authenticate giving the ability to access or modify non-sensitive information or consume sufficient resources which could degrade the performance of the server causing low impact on confidentiality, integrity and availibility of the application. |
| SAP MDM Server ReadString function allows an attacker to send specially crafted packets which could trigger a memory read access violation in the server process that would then fail and exit unexpectedly causing high impact on availability with no impact on confidentiality and integrity of the application. |
| Free of memory not on the heap in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| In the Linux kernel, the following vulnerability has been resolved:
isdn: mISDN: netjet: Fix crash in nj_probe:
'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.
Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.
The KASAN's log reveals it:
[ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[ 3.355112 ] Modules linked in:
[ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.356552 ] RIP: 0010:free_irq+0x100/0x480
[ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 3.362175 ] Call Trace:
[ 3.362175 ] nj_release+0x51/0x1e0
[ 3.362175 ] nj_probe+0x450/0x950
[ 3.362175 ] ? pci_device_remove+0x110/0x110
[ 3.362175 ] local_pci_probe+0x45/0xa0
[ 3.362175 ] pci_device_probe+0x12b/0x1d0
[ 3.362175 ] really_probe+0x2a9/0x610
[ 3.362175 ] driver_probe_device+0x90/0x1d0
[ 3.362175 ] ? mutex_lock_nested+0x1b/0x20
[ 3.362175 ] device_driver_attach+0x68/0x70
[ 3.362175 ] __driver_attach+0x124/0x1b0
[ 3.362175 ] ? device_driver_attach+0x70/0x70
[ 3.362175 ] bus_for_each_dev+0xbb/0x110
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] driver_attach+0x27/0x30
[ 3.362175 ] bus_add_driver+0x1eb/0x2a0
[ 3.362175 ] driver_register+0xa9/0x180
[ 3.362175 ] __pci_register_driver+0x82/0x90
[ 3.362175 ] ? w6692_init+0x38/0x38
[ 3.362175 ] nj_init+0x36/0x38
[ 3.362175 ] do_one_initcall+0x7f/0x3d0
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.362175 ] kernel_init_freeable+0x2aa/0x301
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] kernel_init+0x18/0x190
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ret_from_fork+0x1f/0x30
[ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.362175 ] Call Trace:
[ 3.362175 ] dump_stack+0xba/0xf5
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] panic+0x15a/0x3f2
[ 3.362175 ] ? __warn+0xf2/0x150
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] __warn+0x108/0x150
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] report_bug+0x119/0x1c0
[ 3.362175 ] handle_bug+0x3b/0x80
[ 3.362175 ] exc_invalid_op+0x18/0x70
[ 3.362175 ] asm_exc_invalid_op+0x12/0x20
[ 3.362175 ] RIP: 0010:free_irq+0x100
---truncated--- |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). In affected versions specific DATA submessages can be sent to a discovery locator which may trigger a free error. This can remotely crash any Fast-DDS process. The call to free() could potentially leave the pointer in the attackers control which could lead to a double free. This issue has been addressed in versions 2.12.0, 2.11.3, 2.10.3, and 2.6.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| GSS-NTLMSSP is a mechglue plugin for the GSSAPI library that implements NTLM authentication. Prior to version 1.2.0, an incorrect free when decoding target information can trigger a denial of service. The error condition incorrectly assumes the `cb` and `sh` buffers contain a copy of the data that needs to be freed. However, that is not the case. This vulnerability can be triggered via the main `gss_accept_sec_context` entry point. This will likely trigger an assertion failure in `free`, causing a denial-of-service. This issue is fixed in version 1.2.0. |
| libcurl's ASN1 parser has this utf8asn1str() function used for parsing an ASN.1 UTF-8 string. Itcan detect an invalid field and return error. Unfortunately, when doing so it also invokes `free()` on a 4 byte localstack buffer. Most modern malloc implementations detect this error and immediately abort. Some however accept the input pointer and add that memory to its list of available chunks. This leads to the overwriting of nearby stack memory. The content of the overwrite is decided by the `free()` implementation; likely to be memory pointers and a set of flags. The most likely outcome of exploting this flaw is a crash, although it cannot be ruled out that more serious results can be had in special circumstances. |
| yasm v1.3.0 was discovered to contain a use after free via the function expand_mmac_params at /nasm/nasm-pp.c. Note: Multiple third parties dispute this as a bug and not a vulnerability according to the YASM security policy. |
| An invalid free vulnerability exists in the Frame stream parser functionality of Ichitaro 2022 1.0.1.57600. A specially crafted document can lead to an attempt to free a stack pointer, which causes memory corruption. An attacker can provide a malicious file to trigger this vulnerability. |
| In PHP versions 8.1.x below 8.1.8, when fileinfo functions, such as finfo_buffer, due to incorrect patch applied to the third party code from libmagic, incorrect function may be used to free allocated memory, which may lead to heap corruption. |
