| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| kin-openapi is a Go project for handling OpenAPI files. From 0.124.0 until 0.142.0, openapi3filter.sliceMapToSlice in openapi3filter/req_resp_decoder.go converts attacker-controlled sparse indexes from a deepObject query parameter into a dense slice by allocating entries from zero through the largest supplied index, after which buildResObj creates another slice of the same length. This allocation occurs before schema validation, so maxItems does not prevent it. An unauthenticated client can send a small query such as param[items][50000000]=x to an endpoint whose deepObject schema contains an array, forcing multi-gigabyte heap allocation and causing an OOM kill or restart loop. Other request-body encodings and styled parameters that do not produce bracketed integer indexes are not affected. This issue is fixed in version 0.142.0. |
| libpcap BPF interpreter detects neither reaching the end of the filter program buffer due to lack of a return instruction nor executing a jump instruction with an offset that translates to a pointer outside of the buffer. In particular uncommon use cases a crafted filter program can cause the interpreter to try reading the OS process memory in the 32GiB around the buffer on 64-bit architectures and in the entire address space on 32-bit architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| A maliciously crafted input, when processed by the Autodesk Installer IPC frame parser, may trigger improper validation of an input-specified position or offset, resulting in an out-of-range substring operation. A malicious actor may leverage this vulnerability to cause the NT AUTHORITY\SYSTEM service to terminate unexpectedly, resulting in a denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate free block extents against the partition length
udf_free_blocks() checks the logical block number and count against the
partition length, but drops the extent offset from that final bound. A
crafted extent can pass the guard while logicalBlockNum + offset + count
points past the partition, which later indexes past the space bitmap
array.
A single ftruncate(2) on a file backed by such an extent reliably
panics the kernel. This is a local availability issue. On desktop
systems where UDisks/polkit allows the active user to mount removable
UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply
the crafted filesystem and trigger the panic by truncating a writable
file on it. Systems that require root or CAP_SYS_ADMIN to mount the
image have a higher prerequisite.
No confidentiality or integrity impact is claimed: the reproduced
primitive is an out-of-bounds read of a bitmap pointer slot followed by
a kernel panic.
Use the already computed logicalBlockNum + offset + count value for the
partition length check. Also make load_block_bitmap() reject an
out-of-range block group before indexing s_block_bitmap[], so corrupted
callers cannot walk past the flexible array. |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. |
| In the Linux kernel, the following vulnerability has been resolved:
perf tools: Use perf_env__get_cpu_topology() in machine__resolve()
machine__resolve() accesses env->cpu[al->cpu].socket_id after checking
al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu
against env->nr_cpus_avail. Since al->cpu comes from the untrusted
perf.data sample, a crafted file with a large CPU index causes an
out-of-bounds heap read.
Use perf_env__get_cpu_topology() which validates both NULL and bounds.
Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t):
without this, values like 65536 silently truncate to 0, bypassing the
accessor's internal check and returning CPU 0's topology. |
| The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix queue index used to wake the peer txq in veth_poll
veth_poll() derives the index of the peer TX queue to wake from
rq->xdp_rxq.queue_index. That field is only initialized by
xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an
XDP program is attached. On the plain GRO/NAPI path
(veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so
queue_index stays 0 for every queue, as priv->rq is zero-allocated.
So in a multi-queue setup with GRO enabled and no XDP program attached,
every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops
peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing
ever wakes it again: the poller draining queue 1 wakes queue 0 instead.
veth implements no ndo_tx_timeout, so the netdev watchdog does not kick
in either, and the queue stays stopped indefinitely.
Derive the index from the position of the rq within priv->rq instead,
which is correct regardless of whether XDP was ever enabled.
Scripts to reproduce the stall are available at
https://github.com/netoptimizer/veth-backpressure-performance-testing |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, the public parser entrypoint `ratex_parser::parse(&str)` panics on the 9-byte input `\verbéxé` (i.e. `\verb` followed by the non-ASCII delimiter `é`). When handling a `\verb` command, the parser slices the verbatim argument with byte indices (`arg[1..arg.len() - 1]`); if the delimiter character is multibyte UTF-8, index `1` lands inside that character and Rust panics with *“byte index 1 is not a char boundary”*. Because RaTeX’s release profile sets `panic = "abort"` (`Cargo.toml:48`), the panic aborts the entire process — not just the current request/thread — making this a hard denial of service for any service that renders untrusted LaTeX. Version 0.1.11 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix condition in 'nand_select_target()'
'cs' here must be in range [0:nanddev_ntargets[. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for
accessing p->targets[]. However, cxled->pos can be set to negative errno
in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This
causes the driver to use a negative index to access p->targets[],
resulting in out-of-bounds access.
Fix it by walking p->targets[] instead of using cxled->pos directly. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tegra: tegra210_ahub: Validate written enum value
tegra_ahub_put_value_enum() reads e->values[item[0]] before
checking whether item[0] is within the enum item range. The existing
check therefore happens too late to prevent an out-of-range read of the
values array.
Move the check before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu/buddy: bail out of try_harder when alignment cannot be honoured
The try_harder contiguous fallback could return a range whose start
offset did not match the caller's min_block_size. When a candidate's
start is misaligned, realign it: free the misaligned run and reallocate
exactly @size at the next lower min_block_size boundary. This keeps the
returned size unchanged with no surplus to trim, and rejects the request
only when no aligned candidate fits.
v2: align misaligned candidates down to min_block_size instead of
bailing out, for both the RHS and LHS paths (Matthew). |
