Export limit exceeded: 377219 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377219 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68333 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object. | ||||
| CVE-2026-68367 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-68369 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress. | ||||
| CVE-2026-48443 | 1 Adobe | 3 Content Credentials Command-line Tool, Content Credentials Js Sdk, Content Credentials Rust Sdk | 2026-08-13 | 6.2 Medium |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-68342 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: avoid putting unrelated P2P peer on socket release ovpn_peer_release_p2p() is called when an OVPN UDP socket is being destroyed. It checks the currently published P2P peer and releases it only if that peer still uses the socket being destroyed. A peer replacement can publish a new peer before the old UDP socket is destroyed. When the old socket destruction path runs afterwards, ovpn_peer_release_p2p() observes the new peer through ovpn->peer. Since the new peer uses a different socket, the function takes the socket mismatch branch. That branch still calls ovpn_peer_put(peer). At this point, however, peer is the currently published replacement peer, not the peer associated with the socket being destroyed. Dropping its reference can free it while ovpn->peer still points to it, leading to later use-after-free accesses from the peer and socket cleanup paths. KASAN reports this as a slab-use-after-free on the kmalloc-1k ovpn_peer object. In the reproducer, the object is allocated from ovpn_peer_new() via ovpn_nl_peer_new_doit(), and freed through ovpn_peer_release_rcu() from RCU callback processing. Observed access sites include ovpn_peer_remove(), ovpn_socket_release(), ovpn_nl_peer_del_notify(), and unlock_ovpn(). Fix this by returning from the socket mismatch branch without putting the peer. | ||||
| CVE-2026-68346 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: validate and free ACPI mute object cs35l41_get_acpi_mute_state() evaluates a _DSM method to get the ACPI mute state and reads the first byte from the returned object. However, the returned ACPI object is owned by the caller and is never freed after use, so each successful query leaks the _DSM result object. The code also assumes that the returned object is a buffer with at least one byte. A malformed firmware response can return a different object type or an empty buffer, and the direct ret->buffer.pointer dereference can then access an invalid pointer. Use the typed _DSM helper, validate that the returned buffer contains at least one byte, and free the ACPI object after reading it. | ||||
| CVE-2026-68350 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`. | ||||
| CVE-2026-68360 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-51583 | 1 Usememos | 1 Memos | 2026-08-13 | 8.5 High |
| An issue in usememos through v0.30.0 allows a remote authenticated attacker to perform Server-Side Request Forgery (SSRF) via the Webhook validation mechanism in internal/webhook/validate.go, by setting a webhook target to an internal address. | ||||
| CVE-2026-68364 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix ISM dc_lock deadlock during suspend [Why] System hang observed during suspend/resume while video is playing. amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM delayed work via disable_delayed_work_sync(). The work handlers themselves take dc_lock, producing an ABBA deadlock when a worker is in flight at suspend time. [How] Split the disable path into two phases with opposite locking contracts: 1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold dc_lock. 2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM back to FULL_POWER_RUNNING, must hold dc_lock. | ||||
| CVE-2026-68368 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary. | ||||
| CVE-2026-68372 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: port: Deattach Type-C connector on component unbind connector_unbind() is the mirror of connector_bind(), but it is missing the symmetric call to typec_deattach() that connector_bind() makes via: if (port_dev->child) typec_attach(port_dev->connector, &port_dev->child->dev); When a Thunderbolt dock is unplugged, two teardown paths race: 1. The component framework calls connector_unbind() first, which sets port_dev->connector = NULL without calling typec_deattach(). This leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at the USB device that is about to be freed. 2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...), but port_dev->connector is already NULL, so the call is a no-op and port->usb2_dev is never cleared. 3. Concurrently, UCSI detects a PD partner-disconnect event and calls typec_unregister_partner(), which reads port->usb2_dev (now a dangling pointer to freed memory) and passes it to typec_partner_unlink_device() -> sysfs_remove_link() -> dev_name() on the freed device, corrupting the typec/UCSI partner state. This corruption leaves the Thunderbolt tunnel in an inconsistent state on the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails to enumerate: AER fires a slot reset while the igc driver is still initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits igc_rd32 on an already-detached device: igc 0000:2e:00.0 eth0: PCIe link lost, device now detached igc: Failed to read reg 0x0! WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005 igc_rd32+0xa4/0xc0 [igc] Call Trace: igc_disable_pcie_master+0x16/0xa0 [igc] igc_reset_hw_base+0x14/0x170 [igc] igc_reset+0x63/0x110 [igc] igc_io_slot_reset+0x9e/0xd0 [igc] report_slot_reset+0x5d/0xc0 pcie_do_recovery+0x209/0x400 aer_isr_one_error_type+0x235/0x430 aer_isr+0x4e/0x80 irq_thread+0xf4/0x1f0 4. UCSI later handles the PD partner-disconnect and calls typec_unregister_partner(), which still sees the stale port->usb2_dev and tries to remove its sysfs link a second time: kernfs: can not remove 'typec', no directory WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0 Workqueue: events ucsi_handle_connector_change [typec_ucsi] Call Trace: sysfs_remove_link+0x19/0x50 typec_unregister_partner+0x6e/0x120 [typec] ucsi_unregister_partner+0x107/0x150 [typec_ucsi] ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 ret_from_fork+0x121/0x140 ret_from_fork_asm+0x1a/0x30 With worse timing the same stale pointer is dereferenced after the backing memory is freed, turning the warning into a use-after-free. Fix the asymmetry: call typec_deattach() before clearing port_dev->connector, matching what connector_bind() does on the bind side. typec_partner_deattach() is already protected by port->partner_link_lock, so it serialises safely with the concurrent typec_unregister_partner() path. | ||||
| CVE-2026-68386 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject unhashed UDP sockets on sockmap update UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false. Because sockmap accepts unbound UDP sockets, a BPF program can increment a socket's refcount via lookup. If the socket is subsequently bound, the transition from unbound to bound causes bpf_sk_release() to skip the decrement of the refcount, causing a memory leak. unreferenced object 0xffff88810bc2eb40 (size 1984): comm "test_progs", pid 2451, jiffies 4295320596 hex dump (first 32 bytes): 7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................ 02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace (crc bdee079d): kmem_cache_alloc_noprof+0x557/0x660 sk_prot_alloc+0x69/0x240 sk_alloc+0x30/0x460 inet_create+0x2ce/0xf80 __sock_create+0x25b/0x5c0 __sys_socket+0x119/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0xa1/0x5f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Instead of special-casing for refcounted sockets, reject unhashed UDP sockets during sockmap updates, as there is no benefit to supporting those. This effectively reverts the commit under Fixes, with two exceptions: 1. sock_map_sk_state_allowed() maintains a fall-through `return true`. 2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage"), the proto::unhash BPF handler is not reintroduced. Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject unhashed sockets in bpf_sk_assign"). | ||||
| CVE-2026-20713 | 1 Intel | 1 Xeon Processors | 2026-08-13 | N/A |
| Always-incorrect control flow implementation in some firmware for some Intel(R) Xeon(R) processors may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. | ||||
| CVE-2026-14548 | 2 Lingotek-translation, Wordpress | 2 Ray Enterprise Translation, Wordpress | 2026-08-13 | 6.5 Medium |
| The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to overwrite the administrator-configured translation API token with an arbitrary value. | ||||
| CVE-2026-15567 | 1 Redhat | 7 Fuse, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Expansion Pack and 4 more | 2026-08-13 | 7.5 High |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. | ||||
| CVE-2026-48438 | 1 Adobe | 3 Content Credentials Command-line Tool, Content Credentials Js Sdk, Content Credentials Rust Sdk | 2026-08-13 | 7.5 High |
| CAI Content Credentials is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-68395 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. | ||||
| CVE-2026-48412 | 1 Adobe | 3 Adobe Commerce, Adobe Commerce B2b, Magento Open Source | 2026-08-13 | 2.7 Low |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in privilege escalation. An attacker with high privileges could exploit this vulnerability to gain elevated access to restricted resources. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-18950 | 2 Red Hat, Redhat | 2 Red Hat Openshift Ai (rhoai), Openshift Ai | 2026-08-13 | 8.8 High |
| A flaw was found in odh-dashboard. An authenticated user of the dashboard can exploit a vulnerability related to how RoleBindings are created. The system does not properly validate the `roleRef` field, allowing a user to specify an arbitrary role, including highly privileged ones like `cluster-admin`. This can lead to privilege escalation, where an attacker gains unauthorized elevated access within their namespace and potentially persistent control over the system. | ||||