| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject auth/assoc to AP with our address
If the AP uses our own address as its MLD address or BSSID, then
clearly something's wrong. Reject such connections so we don't
try and fail later. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix incomplete state save in rxe_requester
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: Add a check for oversized packets
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix poll request timeout handling
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check 'jh->b_transaction' before removing it from checkpoint
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix hci_suspend_sync crash
If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier
may still be accessing it, it can cause the program to crash.
Here's the call trace:
<4>[102152.653246] Call Trace:
<4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth]
<4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth]
<4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth]
<4>[102152.653268] notifier_call_chain+0x43/0x6b
<4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69
<4>[102152.653273] __pm_notifier_call_chain+0x22/0x39
<4>[102152.653276] pm_suspend+0x287/0x57c
<4>[102152.653278] state_store+0xae/0xe5
<4>[102152.653281] kernfs_fop_write+0x109/0x173
<4>[102152.653284] __vfs_write+0x16f/0x1a2
<4>[102152.653287] ? selinux_file_permission+0xca/0x16f
<4>[102152.653289] ? security_file_permission+0x36/0x109
<4>[102152.653291] vfs_write+0x114/0x21d
<4>[102152.653293] __x64_sys_write+0x7b/0xdb
<4>[102152.653296] do_syscall_64+0x59/0x194
<4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1
This patch holds the reference count of the hci_dev object while
processing it in hci_suspend_notifier to avoid potential crash
caused by the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: Fix leak in devfreq_dev_release()
srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.
Reported by kmemleak. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: do not update mtu if msg_max is too small in mtu negotiation
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
Call Trace:
<IRQ>
skb_release_data+0xf9/0x1d0
kfree_skb_reason+0x40/0x100
tipc_link_xmit+0x57a/0x740 [tipc]
tipc_node_xmit+0x16c/0x5c0 [tipc]
tipc_named_node_up+0x27f/0x2c0 [tipc]
tipc_node_write_unlock+0x149/0x170 [tipc]
tipc_rcv+0x608/0x740 [tipc]
tipc_udp_recv+0xdc/0x1f0 [tipc]
udp_queue_rcv_one_skb+0x33e/0x620
udp_unicast_rcv_skb.isra.72+0x75/0x90
__udp4_lib_rcv+0x56d/0xc20
ip_protocol_deliver_rcu+0x100/0x2d0
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Validate i_depth for exhash directories
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Hide shadow VMCS right after VMCLEAR
free_nested() frees the shadow VMCS while vmcs01 still points to it. But
because it is asynchronous with respect to loaded_vmcs_clear(), the vCPU
might migrate before the pointer is cleared and __loaded_vmcs_clear()
may then execute VMCLEAR.
The VMCS needs to stay attached until its explicit VMCLEAR completes, but
then it can be hidden and the page safely freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: don't free the ASCONF's own transport in DEL-IP processing
sctp_process_asconf() caches the transport the ASCONF chunk is processed
against in asconf->transport (== chunk->transport, set once in sctp_rcv()).
For an ASCONF located through its Address Parameter by
__sctp_rcv_asconf_lookup(), that cached transport corresponds to the
Address Parameter, which need not be the packet's source address.
sctp_process_asconf_param() rejects a DEL-IP for the packet source address
(ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport.
A single ASCONF can therefore carry, in order:
[Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0]
where L differs from the source. The DEL-IP for L passes the D8 check and
calls sctp_assoc_rm_peer() on the transport that asconf->transport still
points at, freeing it (RCU-deferred). The following wildcard DEL-IP then
reuses the now-dangling asconf->transport in sctp_assoc_set_primary() and
sctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freed
transport (->ipaddr, ->state) and plants the dangling pointer into
asoc->peer.primary_path / active_path, and del_nonprimary_peers(), keeping
only the pointer that is no longer on the list, removes every real
transport, leaving the association with a transport_count of 0 and
primary_path/active_path pointing at freed memory.
Reject a DEL-IP that targets the transport the ASCONF is being processed
against, mirroring the existing source-address guard, so the wildcard
branch can never reuse a freed transport. |
| A flaw was found in the community.general Ansible collection's
jenkins_credential module. When creating a Jenkins API token
(credential_type: token), the module correctly protects the input
password with no_log=True in the argument specification, but places
the generated API token returned by the Jenkins API directly into
the Ansible task result dictionary without output suppression. The
token is emitted in plaintext via exit_json(), causing it to appear
in Ansible task output, AWX/Tower/AAP Controller job logs, callback
plugin output, CI/CD pipeline logs, and fact caching backends. An
attacker with access to any of these output channels can obtain the
Jenkins API token and gain the same privileges as the user who
created it. |
| No description is available for this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix slab-use-after-free in decode_session6
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix error unwinding of XDP initialization
When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.
Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: tighten bounds checking in decode_message()
Copy the bounds checking from encode_message() to decode_message().
This patch addresses the following concerns. Ensure that there is
enough space for at least one header so that we don't have a negative
size later.
if (msg_hdr_len < sizeof(*trans_hdr))
Ensure that we have enough space to read the next header from the
msg->data.
if (msg_len > msg_hdr_len - sizeof(*trans_hdr))
return -EINVAL;
Check that the trans_hdr->len is not below the minimum size:
if (hdr_len < sizeof(*trans_hdr))
This minimum check ensures that we don't corrupt memory in
decode_passthrough() when we do.
memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));
And finally, use size_add() to prevent an integer overflow:
if (size_add(msg_len, hdr_len) > msg_hdr_len) |
| In the Linux kernel, the following vulnerability has been resolved:
start_kernel: Add __no_stack_protector function attribute
Back during the discussion of
commit a9a3ed1eff36 ("x86: Fix early boot crash on gcc-10, third try")
we discussed the need for a function attribute to control the omission
of stack protectors on a per-function basis; at the time Clang had
support for no_stack_protector but GCC did not. This was fixed in
gcc-11. Now that the function attribute is available, let's start using
it.
Callers of boot_init_stack_canary need to use this function attribute
unless they're compiled with -fno-stack-protector, otherwise the canary
stored in the stack slot of the caller will differ upon the call to
boot_init_stack_canary. This will lead to a call to __stack_chk_fail()
then panic. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix disconnect vs accept race
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Enhance the attribute size check
This combines the overflow and boundary check so that all attribute size
will be properly examined while enumerating them.
[ 169.181521] BUG: KASAN: slab-out-of-bounds in run_unpack+0x2e3/0x570
[ 169.183161] Read of size 1 at addr ffff8880094b6240 by task mount/247
[ 169.184046]
[ 169.184925] CPU: 0 PID: 247 Comm: mount Not tainted 6.0.0-rc7+ #3
[ 169.185908] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 169.187066] Call Trace:
[ 169.187492] <TASK>
[ 169.188049] dump_stack_lvl+0x49/0x63
[ 169.188495] print_report.cold+0xf5/0x689
[ 169.188964] ? run_unpack+0x2e3/0x570
[ 169.189331] kasan_report+0xa7/0x130
[ 169.189714] ? run_unpack+0x2e3/0x570
[ 169.190079] __asan_load1+0x51/0x60
[ 169.190634] run_unpack+0x2e3/0x570
[ 169.191290] ? run_pack+0x840/0x840
[ 169.191569] ? run_lookup_entry+0xb3/0x1f0
[ 169.192443] ? mi_enum_attr+0x20a/0x230
[ 169.192886] run_unpack_ex+0xad/0x3e0
[ 169.193276] ? run_unpack+0x570/0x570
[ 169.193557] ? ni_load_mi+0x80/0x80
[ 169.193889] ? debug_smp_processor_id+0x17/0x20
[ 169.194236] ? mi_init+0x4a/0x70
[ 169.194496] attr_load_runs_vcn+0x166/0x1c0
[ 169.194851] ? attr_data_write_resident+0x250/0x250
[ 169.195188] mi_read+0x133/0x2c0
[ 169.195481] ntfs_iget5+0x277/0x1780
[ 169.196017] ? call_rcu+0x1c7/0x330
[ 169.196392] ? ntfs_get_block_bmap+0x70/0x70
[ 169.196708] ? evict+0x223/0x280
[ 169.197014] ? __kmalloc+0x33/0x540
[ 169.197305] ? wnd_init+0x15b/0x1b0
[ 169.197599] ntfs_fill_super+0x1026/0x1ba0
[ 169.197994] ? put_ntfs+0x1d0/0x1d0
[ 169.198299] ? vsprintf+0x20/0x20
[ 169.198583] ? mutex_unlock+0x81/0xd0
[ 169.198930] ? set_blocksize+0x95/0x150
[ 169.199269] get_tree_bdev+0x232/0x370
[ 169.199750] ? put_ntfs+0x1d0/0x1d0
[ 169.200094] ntfs_fs_get_tree+0x15/0x20
[ 169.200431] vfs_get_tree+0x4c/0x130
[ 169.200714] path_mount+0x654/0xfe0
[ 169.201067] ? putname+0x80/0xa0
[ 169.201358] ? finish_automount+0x2e0/0x2e0
[ 169.201965] ? putname+0x80/0xa0
[ 169.202445] ? kmem_cache_free+0x1c4/0x440
[ 169.203075] ? putname+0x80/0xa0
[ 169.203414] do_mount+0xd6/0xf0
[ 169.203719] ? path_mount+0xfe0/0xfe0
[ 169.203977] ? __kasan_check_write+0x14/0x20
[ 169.204382] __x64_sys_mount+0xca/0x110
[ 169.204711] do_syscall_64+0x3b/0x90
[ 169.205059] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 169.205571] RIP: 0033:0x7f67a80e948a
[ 169.206327] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 169.208296] RSP: 002b:00007ffddf020f58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 169.209253] RAX: ffffffffffffffda RBX: 000055e2547a6060 RCX: 00007f67a80e948a
[ 169.209777] RDX: 000055e2547a6260 RSI: 000055e2547a62e0 RDI: 000055e2547aeaf0
[ 169.210342] RBP: 0000000000000000 R08: 000055e2547a6280 R09: 0000000000000020
[ 169.210843] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055e2547aeaf0
[ 169.211307] R13: 000055e2547a6260 R14: 0000000000000000 R15: 00000000ffffffff
[ 169.211913] </TASK>
[ 169.212304]
[ 169.212680] Allocated by task 0:
[ 169.212963] (stack is not available)
[ 169.213200]
[ 169.213472] The buggy address belongs to the object at ffff8880094b5e00
[ 169.213472] which belongs to the cache UDP of size 1152
[ 169.214095] The buggy address is located 1088 bytes inside of
[ 169.214095] 1152-byte region [ffff8880094b5e00, ffff8880094b6280)
[ 169.214639]
[ 169.215004] The buggy address belongs to the physical page:
[ 169.215766] page:000000002e324c8c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94b4
[ 169.218412] head:000000002e324c8c order:2 compound_mapcount:0 compound_pincount:0
[ 169.219078] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
[ 169.220272] raw: 000fffffc0010200
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
Following process will trigger an infinite loop in ubi_wl_put_peb():
ubifs_bgt ubi_bgt
ubifs_leb_unmap
ubi_leb_unmap
ubi_eba_unmap_leb
ubi_wl_put_peb wear_leveling_worker
e1 = rb_entry(rb_first(&ubi->used)
e2 = get_peb_for_wl(ubi)
ubi_io_read_vid_hdr // return err (flash fault)
out_error:
ubi->move_from = ubi->move_to = NULL
wl_entry_destroy(ubi, e1)
ubi->lookuptbl[e->pnum] = NULL
retry:
e = ubi->lookuptbl[pnum]; // return NULL
if (e == ubi->move_from) { // NULL == NULL gets true
goto retry; // infinite loop !!!
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link]. |
