| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Core in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue. |
| In the Linux kernel, the following vulnerability has been resolved:
hdlc_ppp: sync per-proto timers before freeing hdlc state
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix use-after-free on probe error path
rpmsg_chrdev_probe() stores the newly allocated eptdev in the default
endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If
rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while
the default endpoint may still dispatch callbacks with the stale priv
pointer.
Avoid publishing eptdev through the default endpoint until
rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv
pointer is published should be ignored by rpmsg_ept_cb(). Flow-control
updates can hit rpmsg_ept_flow_cb() in the same window, so make both
callbacks return success when priv is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix dereferencing uninitialized error pointer
Fix below smatch warnings:
drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked()
error: we previously assumed 'error' could be null |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| ForgeCode (tailcallhq/forgecode), an AI pair-programming CLI, automatically loads and executes the MCP servers defined in a repository's .mcp.json file on startup without user confirmation. A malicious repository can supply a crafted .mcp.json whose mcpServers entries specify arbitrary command and args values (for example, command: bash with args: ['-c', 'touch /tmp/pwned']). When a user runs the forge CLI inside a cloned untrusted repository, the specified commands are spawned with the invoking user's privileges, resulting in arbitrary code execution. This provides a reliable initial-access and persistence primitive against developers who evaluate untrusted repositories with ForgeCode. |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| PraisonAI is a multi-agent teams system. The v4.6.32 chokepoint refactor (which patched CVE-2026-44334 / GHSA-xcmw-grxf-wjhj) added the PRAISONAI_ALLOW_LOCAL_TOOLS env-var gate to the tool_override.py sinks. However, two additional spec.loader.exec_module call sites in praisonai/agents_generator.py were missed and remain completely unguarded in versions prior to 4.6.40. Both functions accept a module_path parameter sourced from YAML configuration and execute it without validation, signature checking, or the env-var gate. Version 4.6.40 fixes the issue. |
| Langflow exec_globals Inclusion of Functionality from Untrusted Control Sphere Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Langflow. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the exec_globals parameter provided to the validate endpoint. The issue results from the inclusion of a resource from an untrusted control sphere. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27325. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the mailpit dump --http <base-url> <out-dir> sub-command downloads every message from a remote Mailpit instance and writes each one as <id>.eml inside the user-supplied output directory. The message ID field is taken verbatim from the JSON response of the remote server and concatenated into the output path with path.Join, which silently normalizes `..` segments. A malicious HTTP server impersonating Mailpit can therefore make mailpit dump write attacker-controlled bytes to any path the running user can write, fully outside the intended output directory. Version 1.30.0 contains a patch. |
| Meshtastic is an open source mesh networking solution. Prior to version 2.7.21.1370b23, the Meshtastic GitHub repository's main_matrix.yml workflow is triggered by pull_request_target and multiple jobs check out the attacker's fork code and execute it with access to repository secrets and elevated GITHUB_TOKEN permissions. No approval gate exists. Pull requests from external users with author_association: "NONE" triggered the CI workflow automatically. The workflow directly executes attacker-controlled files from the fork checkout. This issue could have resulted in supply chain compromise, self-hosted runner compromise, and/or repository takeover for the repo. This issue is separate from GHSA-6mwm-v2vv-pp96, which addressed a command injection via github.head_ref in the setup job of the same workflow. That fix correctly moved to environment variables. However, the more critical fork checkout vulnerability across the check, build, and build-debian-src jobs was not addressed. Version 2.7.21.1370b23 contains a patch for thie issue. |
| A security vulnerability has been detected in Sipeed PicoClaw up to 0.2.9. Affected is the function NewContextBuilder of the file pkg/agent/context.go. Such manipulation leads to inclusion of functionality from untrusted control sphere. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The reported GitHub issue was closed automatically with the label "not planned" by a bot. |
| Microsoft Streaming Service Elevation of Privilege Vulnerability |
