| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wireless: Fail probe when there is no ACPI match
Every platform driver can be forced to match a device that does not match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device ACPI companion
object need to verify its presence.
asus_wireless_probe() returns success when acpi_match_acpi_device()
finds no match, leaving behind an input device that never reports
anything because the notify handler is not installed. Worse, when the
driver is force-bound to a device without an ACPI companion, probe
still succeeds and stores a NULL companion pointer, which
asus_wireless_remove() later passes to acpi_dev_remove_notify_handler(),
leading to a NULL pointer dereference on unbind.
Return -ENODEV when the device does not match the ID table. This also
covers the missing-companion case, because acpi_match_acpi_device()
rejects a NULL device. Perform the check before allocating any driver
state, instead of after the input device has already been registered. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths
The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation
failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which
calls dma_fence_put() on the fence. However, at that point the fence has
only been kmalloc'd — dma_fence_init() has not been called yet, so the
refcount and the fence ops are uninitialized. Calling dma_fence_put() on
such an object leads to undefined behavior.
Use kfree() instead, since the fence is just a plain allocation at this
stage, and rename the label to err_fence_free to reflect the actual
cleanup action. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: check endpoint DMA allocation
ast_udc_probe() allocates a coherent DMA buffer used as the backing store
for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer
pointers from udc->ep0_buf, so a failed allocation is dereferenced during
probe.
Check the allocation before endpoint setup. The existing probe error path
called ast_udc_remove(), which unregisters the gadget unconditionally and
is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup
helper for probe failures so pre-registration failures only unwind the
resources that were actually initialized.
This was found by a local static analysis checker for unchecked allocator
returns while scanning Linux 6.16. The change was checked by applying it
to current mainline and by running checkpatch. I do not have access to
Aspeed UDC hardware, so no runtime testing was performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held,
as remove_id_store can free the node. Thus, make a copy in
usb_probe_interface. Clarify the documentation that the id parameter is
only valid during the probe.
USB serial has the same pattern, but it does not need fixing as the IDs
cannot be removed via sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: acpi-notify: Check ACPI companion before use
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
san_probe() dereferences the result of ACPI_COMPANION() when installing
the GSBUS address space handler, so force-binding the driver to a device
without an ACPI companion leads to a NULL pointer dereference. The
dereference was introduced when the probe function was switched from
ACPI_HANDLE() to ACPI_COMPANION().
Check the ACPI companion against NULL and return -ENODEV when it is
missing, like commit e4865a56d013 ("ACPI: driver: Check ACPI_COMPANION()
against NULL during probe") does for the core ACPI platform drivers. |
