| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: fix kexec crash due to VP assist page corruption
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: ipheth: do not stop RX on failing RX callback
RX callbacks can fail for multiple reasons:
* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory
None of these should cause the driver to seize up.
Make such failures non-critical and continue processing further
incoming URBs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
(cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Only clear timer if a kthread exists
The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.
Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.
Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
Since khugepaged was changed to allow retracting page tables in file
mappings without holding the mmap lock, these BUG_ON()s are wrong - get
rid of them.
We could also remove the preceding "if (unlikely(...))" block, but then we
could reach pte_offset_map_lock() with transhuge pages not just for file
mappings but also for anonymous mappings - which would probably be fine
but I think is not necessarily expected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Restrict high priorities on group_create
We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.
We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.
As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.
Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.
[1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: void array out of bound when loop tnl_num
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix firmware crash due to invalid peer nss
Currently, if the access point receives an association
request containing an Extended HE Capabilities Information
Element with an invalid MCS-NSS, it triggers a firmware
crash.
This issue arises when EHT-PHY capabilities shows support
for a bandwidth and MCS-NSS set for that particular
bandwidth is filled by zeros and due to this, driver obtains
peer_nss as 0 and sending this value to firmware causes
crash.
Address this issue by implementing a validation step for
the peer_nss value before passing it to the firmware. If
the value is greater than zero, proceed with forwarding
it to the firmware. However, if the value is invalid,
reject the association request to prevent potential
firmware crashes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Require drivers to supply the cache_invalidate_user ops
If drivers don't do this then iommufd will oops invalidation ioctls with
something like:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9
Hardware name: linux,dummy-virt (DT)
pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c)
pc : 0x0
lr : iommufd_hwpt_invalidate+0xa4/0x204
sp : ffff800080f3bcc0
x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0
x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000
x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002
x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80
Call trace:
0x0
iommufd_fops_ioctl+0x154/0x274
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xb4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
All existing drivers implement this op for nesting, this is mostly a
bisection aid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend
We do not directly enable/disable VCN IRQ in vcn 5.0.0.
And we do not handle the IRQ state as well. So the calls to
disable IRQ and set state are removed. This effectively gets
rid of the warining of
"WARN_ON(!amdgpu_irq_enabled(adev, src, type))"
in amdgpu_irq_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/qspinlock: Fix deadlock in MCS queue
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards harder
Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy codecs declared like this:
SND_SOC_DAILINK_DEF(dummy,
DAILINK_COMP_ARRAY(COMP_DUMMY()));
expand to:
static struct snd_soc_dai_link_component dummy[] = {
};
Which means that dummy is a zero sized array and thus dais[i].codecs should
not be dereferenced *at all* since it points to the address of the next
variable stored in the data section as the "dummy" variable has an address
but no size, so even dereferencing dais[0] is already an out of bounds
array reference.
Which means that the if (dais[i].codecs->name) check added in
commit 7d99a70b6595 ("ASoC: Intel: Boards: Fix NULL pointer deref
in BYT/CHT boards") relies on that the part of the next variable which
the name member maps to just happens to be NULL.
Which apparently so far it usually is, except when it isn't
and then it results in crashes like this one:
[ 28.795659] BUG: unable to handle page fault for address: 0000000000030011
...
[ 28.795780] Call Trace:
[ 28.795787] <TASK>
...
[ 28.795862] ? strcmp+0x18/0x40
[ 28.795872] 0xffffffffc150c605
[ 28.795887] platform_probe+0x40/0xa0
...
[ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102]
Really fix things this time around by checking dais.num_codecs != 0. |
| In the Linux kernel, the following vulnerability has been resolved:
codetag: debug: mark codetags for poisoned page as empty
When PG_hwpoison pages are freed they are treated differently in
free_pages_prepare() and instead of being released they are isolated.
Page allocation tag counters are decremented at this point since the page
is considered not in use. Later on when such pages are released by
unpoison_memory(), the allocation tag counters will be decremented again
and the following warning gets reported:
[ 113.930443][ T3282] ------------[ cut here ]------------
[ 113.931105][ T3282] alloc_tag was not set
[ 113.931576][ T3282] WARNING: CPU: 2 PID: 3282 at ./include/linux/alloc_tag.h:130 pgalloc_tag_sub.part.66+0x154/0x164
[ 113.932866][ T3282] Modules linked in: hwpoison_inject fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_man4
[ 113.941638][ T3282] CPU: 2 UID: 0 PID: 3282 Comm: madvise11 Kdump: loaded Tainted: G W 6.11.0-rc4-dirty #18
[ 113.943003][ T3282] Tainted: [W]=WARN
[ 113.943453][ T3282] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
[ 113.944378][ T3282] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 113.945319][ T3282] pc : pgalloc_tag_sub.part.66+0x154/0x164
[ 113.946016][ T3282] lr : pgalloc_tag_sub.part.66+0x154/0x164
[ 113.946706][ T3282] sp : ffff800087093a10
[ 113.947197][ T3282] x29: ffff800087093a10 x28: ffff0000d7a9d400 x27: ffff80008249f0a0
[ 113.948165][ T3282] x26: 0000000000000000 x25: ffff80008249f2b0 x24: 0000000000000000
[ 113.949134][ T3282] x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000
[ 113.950597][ T3282] x20: ffff0000c08fcad8 x19: ffff80008251e000 x18: ffffffffffffffff
[ 113.952207][ T3282] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800081746210
[ 113.953161][ T3282] x14: 0000000000000000 x13: 205d323832335420 x12: 5b5d353031313339
[ 113.954120][ T3282] x11: ffff800087093500 x10: 000000000000005d x9 : 00000000ffffffd0
[ 113.955078][ T3282] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008236ba90 x6 : c0000000ffff7fff
[ 113.956036][ T3282] x5 : ffff000b34bf4dc8 x4 : ffff8000820aba90 x3 : 0000000000000001
[ 113.956994][ T3282] x2 : ffff800ab320f000 x1 : 841d1e35ac932e00 x0 : 0000000000000000
[ 113.957962][ T3282] Call trace:
[ 113.958350][ T3282] pgalloc_tag_sub.part.66+0x154/0x164
[ 113.959000][ T3282] pgalloc_tag_sub+0x14/0x1c
[ 113.959539][ T3282] free_unref_page+0xf4/0x4b8
[ 113.960096][ T3282] __folio_put+0xd4/0x120
[ 113.960614][ T3282] folio_put+0x24/0x50
[ 113.961103][ T3282] unpoison_memory+0x4f0/0x5b0
[ 113.961678][ T3282] hwpoison_unpoison+0x30/0x48 [hwpoison_inject]
[ 113.962436][ T3282] simple_attr_write_xsigned.isra.34+0xec/0x1cc
[ 113.963183][ T3282] simple_attr_write+0x38/0x48
[ 113.963750][ T3282] debugfs_attr_write+0x54/0x80
[ 113.964330][ T3282] full_proxy_write+0x68/0x98
[ 113.964880][ T3282] vfs_write+0xdc/0x4d0
[ 113.965372][ T3282] ksys_write+0x78/0x100
[ 113.965875][ T3282] __arm64_sys_write+0x24/0x30
[ 113.966440][ T3282] invoke_syscall+0x7c/0x104
[ 113.966984][ T3282] el0_svc_common.constprop.1+0x88/0x104
[ 113.967652][ T3282] do_el0_svc+0x2c/0x38
[ 113.968893][ T3282] el0_svc+0x3c/0x1b8
[ 113.969379][ T3282] el0t_64_sync_handler+0x98/0xbc
[ 113.969980][ T3282] el0t_64_sync+0x19c/0x1a0
[ 113.970511][ T3282] ---[ end trace 0000000000000000 ]---
To fix this, clear the page tag reference after the page got isolated
and accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
When enable CONFIG_MEMCG & CONFIG_KFENCE & CONFIG_KMEMLEAK, the following
warning always occurs,This is because the following call stack occurred:
mem_pool_alloc
kmem_cache_alloc_noprof
slab_alloc_node
kfence_alloc
Once the kfence allocation is successful,slab->obj_exts will not be empty,
because it has already been assigned a value in kfence_init_pool.
Since in the prepare_slab_obj_exts_hook function,we perform a check for
s->flags & (SLAB_NO_OBJ_EXT | SLAB_NOLEAKTRACE),the alloc_tag_add function
will not be called as a result.Therefore,ref->ct remains NULL.
However,when we call mem_pool_free,since obj_ext is not empty, it
eventually leads to the alloc_tag_sub scenario being invoked. This is
where the warning occurs.
So we should add corresponding checks in the alloc_tagging_slab_free_hook.
For __GFP_NO_OBJ_EXT case,I didn't see the specific case where it's using
kfence,so I won't add the corresponding check in
alloc_tagging_slab_free_hook for now.
[ 3.734349] ------------[ cut here ]------------
[ 3.734807] alloc_tag was not set
[ 3.735129] WARNING: CPU: 4 PID: 40 at ./include/linux/alloc_tag.h:130 kmem_cache_free+0x444/0x574
[ 3.735866] Modules linked in: autofs4
[ 3.736211] CPU: 4 UID: 0 PID: 40 Comm: ksoftirqd/4 Tainted: G W 6.11.0-rc3-dirty #1
[ 3.736969] Tainted: [W]=WARN
[ 3.737258] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
[ 3.737875] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.738501] pc : kmem_cache_free+0x444/0x574
[ 3.738951] lr : kmem_cache_free+0x444/0x574
[ 3.739361] sp : ffff80008357bb60
[ 3.739693] x29: ffff80008357bb70 x28: 0000000000000000 x27: 0000000000000000
[ 3.740338] x26: ffff80008207f000 x25: ffff000b2eb2fd60 x24: ffff0000c0005700
[ 3.740982] x23: ffff8000804229e4 x22: ffff800082080000 x21: ffff800081756000
[ 3.741630] x20: fffffd7ff8253360 x19: 00000000000000a8 x18: ffffffffffffffff
[ 3.742274] x17: ffff800ab327f000 x16: ffff800083398000 x15: ffff800081756df0
[ 3.742919] x14: 0000000000000000 x13: 205d344320202020 x12: 5b5d373038343337
[ 3.743560] x11: ffff80008357b650 x10: 000000000000005d x9 : 00000000ffffffd0
[ 3.744231] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008237bad0 x6 : c0000000ffff7fff
[ 3.744907] x5 : ffff80008237ba78 x4 : ffff8000820bbad0 x3 : 0000000000000001
[ 3.745580] x2 : 68d66547c09f7800 x1 : 68d66547c09f7800 x0 : 0000000000000000
[ 3.746255] Call trace:
[ 3.746530] kmem_cache_free+0x444/0x574
[ 3.746931] mem_pool_free+0x44/0xf4
[ 3.747306] free_object_rcu+0xc8/0xdc
[ 3.747693] rcu_do_batch+0x234/0x8a4
[ 3.748075] rcu_core+0x230/0x3e4
[ 3.748424] rcu_core_si+0x14/0x1c
[ 3.748780] handle_softirqs+0x134/0x378
[ 3.749189] run_ksoftirqd+0x70/0x9c
[ 3.749560] smpboot_thread_fn+0x148/0x22c
[ 3.749978] kthread+0x10c/0x118
[ 3.750323] ret_from_fork+0x10/0x20
[ 3.750696] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Free pvr_vm_gpuva after unlink
This caused a measurable memory leak. Although the individual
allocations are small, the leaks occurs in a high-usage codepath
(remapping or unmapping device memory) so they add up quickly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check UnboundedRequestEnabled's value
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled
is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
if (p->UnboundedRequestEnabled) checks its address, not bool value.
This fixes 1 REVERSE_INULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: intel: Add check devm_kasprintf() returned value
intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Check if WMI event data exists
The BIOS can choose to return no event data in response to a
WMI event, so the ACPI object passed to the WMI notify handler
can be NULL.
Check for such a situation and ignore the event in such a case. |
