| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix using strlen with hdev->{dev_name,short_name}
Both dev_name and short_name are not guaranteed to be NULL terminated so
this instead use strnlen and then attempt to determine if the resulting
string needs to be truncated or not. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Initialize Xen timer only once
Add a check for existing xen timers before initializing a new one.
Currently kvm_xen_init_timer() is called on every
KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG
crash when vcpu->arch.xen.timer is already set.
ODEBUG: init active (active state 0)
object type: hrtimer hint: xen_timer_callbac0
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502
Call Trace:
__debug_object_init
debug_hrtimer_init
debug_init
hrtimer_init
kvm_xen_init_timer
kvm_xen_vcpu_set_attr
kvm_arch_vcpu_ioctl
kvm_vcpu_ioctl
vfs_ioctl |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: Fix out-of-bounds access
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Allow waiting for commands to complete on removed device
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: Add boundary check in put_entry()
Just like next_entry(), boundary check is necessary to prevent memory
out-of-bound access. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Align upwards buffer size
The hardware can support any image size WxH,
with arbitrary W (image width) and H (image height) dimensions.
Align upwards buffer size for both encoder and decoder.
and leave the picture resolution unchanged.
For decoder, the risk of memory out of bounds can be avoided.
For both encoder and decoder, the driver will lift the limitation of
resolution alignment.
For example, the decoder can support jpeg whose resolution is 227x149
the encoder can support nv12 1080P, won't change it to 1920x1072. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec - don't sleep when in softirq
When kunpeng920 encryption driver is used to deencrypt and decrypt
packets during the softirq, it is not allowed to use mutex lock. The
kernel will report the following error:
BUG: scheduling while atomic: swapper/57/0/0x00000300
Call trace:
dump_backtrace+0x0/0x1e4
show_stack+0x20/0x2c
dump_stack+0xd8/0x140
__schedule_bug+0x68/0x80
__schedule+0x728/0x840
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x24
__mutex_lock.constprop.0+0x594/0x5dc
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x60
sec_request_init+0x8c/0x1a0 [hisi_sec2]
sec_process+0x28/0x1ac [hisi_sec2]
sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2]
sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2]
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp_output_tail+0x348/0x5c0 [esp4]
esp_output+0x120/0x19c [esp4]
xfrm_output_one+0x25c/0x4d4
xfrm_output_resume+0x6c/0x1fc
xfrm_output+0xac/0x3c0
xfrm4_output+0x64/0x130
ip_build_and_send_pkt+0x158/0x20c
tcp_v4_send_synack+0xdc/0x1f0
tcp_conn_request+0x7d0/0x994
tcp_v4_conn_request+0x58/0x6c
tcp_v6_conn_request+0xf0/0x100
tcp_rcv_state_process+0x1cc/0xd60
tcp_v4_do_rcv+0x10c/0x250
tcp_v4_rcv+0xfc4/0x10a4
ip_protocol_deliver_rcu+0xf4/0x200
ip_local_deliver_finish+0x58/0x70
ip_local_deliver+0x68/0x120
ip_sublist_rcv_finish+0x70/0x94
ip_list_rcv_finish.constprop.0+0x17c/0x1d0
ip_sublist_rcv+0x40/0xb0
ip_list_rcv+0x140/0x1dc
__netif_receive_skb_list_core+0x154/0x28c
__netif_receive_skb_list+0x120/0x1a0
netif_receive_skb_list_internal+0xe4/0x1f0
napi_complete_done+0x70/0x1f0
gro_cell_poll+0x9c/0xb0
napi_poll+0xcc/0x264
net_rx_action+0xd4/0x21c
__do_softirq+0x130/0x358
irq_exit+0x11c/0x13c
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x78/0x2c0
el1_irq+0xb8/0x140
arch_cpu_idle+0x18/0x40
default_idle_call+0x5c/0x1c0
cpuidle_idle_call+0x174/0x1b0
do_idle+0xc8/0x160
cpu_startup_entry+0x30/0x11c
secondary_start_kernel+0x158/0x1e4
softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with
preempt_count 00000100, exited with fffffe00? |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix potential 32-bit overflow when accessing ARRAY map element
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue
After successfull station association, if station queues are disabled for
some reason, the related lists are not emptied. So if some new element is
added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old
one and produce a BUG like this:
[ 46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388).
[ 46.535283] ------------[ cut here ]------------
[ 46.535284] kernel BUG at lib/list_debug.c:26!
[ 46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1
[ 46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012
[ 46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f
[ 46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1
[ 46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286
[ 46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000
[ 46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff
[ 46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666
[ 46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388
[ 46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0
[ 46.666108] FS: 00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000
[ 46.674331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0
[ 46.687422] Call Trace:
[ 46.689906] <TASK>
[ 46.691950] iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm]
[ 46.697601] ieee80211_queue_skb+0x4b3/0x720 [mac80211]
[ 46.702973] ? sta_info_get+0x46/0x60 [mac80211]
[ 46.707703] ieee80211_tx+0xad/0x110 [mac80211]
[ 46.712355] __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211]
...
In order to avoid this problem, we must also remove the related lists when
station queues are disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sf-pdma: Add multithread support for a DMA channel
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 64 > /sys/module/dmatest/parameters/threads_per_chan
% echo 10000 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[ 89.480664] Unable to handle kernel NULL pointer dereference at virtual
address 00000000000000a0
[ 89.488725] Oops [#1]
[ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted
5.17.0-rc5
[ 89.509385] epc : vchan_find_desc+0x32/0x46
[ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6
This happens because of data race. Each thread rewrite channels's
descriptor as soon as device_prep_dma_memcpy() is called. It leads to the
situation when the driver thinks that it uses right descriptor that
actually is freed or substituted for other one.
With current fixes a descriptor changes its value only when it has
been used. A new descriptor is acquired from vc->desc_issued queue that
is already filled with descriptors that are ready to be sent. Threads
have no direct access to DMA channel descriptor. Now it is just possible
to queue a descriptor for further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix a use-after-free
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
Call Trace:
<TASK>
show_stack+0x4e/0x53
dump_stack_lvl+0x51/0x66
print_address_description.constprop.0.cold+0xea/0x41e
print_report.cold+0x90/0x205
kasan_report+0xb9/0xf0
__asan_load8+0x69/0x90
srpt_enable_tpg+0x31/0x70 [ib_srpt]
target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod]
configfs_write_iter+0x18b/0x210
new_sync_write+0x1f2/0x2f0
vfs_write+0x3e3/0x540
ksys_write+0xbb/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts
Ensure SRB is returned during I/O timeout error escalation. If that is not
possible fail the escalation path.
Following crash stack was seen:
BUG: unable to handle kernel paging request at 0000002f56aa90f8
IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx]
Call Trace:
? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx]
? qla2x00_start_sp+0x116/0x1170 [qla2xxx]
? dma_pool_alloc+0x1d6/0x210
? mempool_alloc+0x54/0x130
? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx]
? qla_do_work+0x2d/0x40 [qla2xxx]
? process_one_work+0x14c/0x390 |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: s3fb: Check the size of screen before memset_io()
In the function s3fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000
[ 54.083742] #PF: supervisor write access in kernel mode
[ 54.083744] #PF: error_code(0x0002) - not-present page
[ 54.083760] RIP: 0010:memset_orig+0x33/0xb0
[ 54.083782] Call Trace:
[ 54.083788] s3fb_set_par+0x1ec6/0x4040
[ 54.083806] fb_set_var+0x604/0xeb0
[ 54.083836] do_fb_ioctl+0x234/0x670
Fix the this by checking the value of 'screen_size' before memset_io(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check correct bounds for stream encoder instances for DCN303
[Why & How]
eng_id for DCN303 cannot be more than 1, since we have only two
instances of stream encoders.
Check the correct boundary condition for engine ID for DCN303 prevent
the potential out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bgmac: Fix a BUG triggered by wrong bytes_compl
On one of our machines we got:
kernel BUG at lib/dynamic_queue_limits.c:27!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1
Hardware name: BRCM XGS iProc
task: ee3415c0 task.stack: ee32a000
PC is at dql_completed+0x168/0x178
LR is at bgmac_poll+0x18c/0x6d8
pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313
sp : ee32be14 ip : 000005ea fp : 00000bd4
r10: ee558500 r9 : c0116298 r8 : 00000002
r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851
r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 12c5387d Table: 8e88c04a DAC: 00000051
Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210)
Stack: (0xee32be14 to 0xee32c000)
be00: ee558520 ee52c100 ef128810
be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040
be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040
be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a
be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98
bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8
bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000
bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520
bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900
bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c
bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28
bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70
bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000
bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8)
[<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494)
[<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c)
[<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98)
[<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98)
[<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0)
[<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158)
[<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24)
Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7)
The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG
trigered by wrong bytes_compl") and potentially introduced by commit
b38c83dd0866 ("bgmac: simplify tx ring index handling").
If there is an RX interrupt between setting ring->end
and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free()
can miscalculate the queue size while called from bgmac_poll().
The machine which triggered the BUG runs a v4.14 RT kernel - but the issue
seems present in mainline too. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: don't leak snap_rwsem in handle_cap_grant
When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is
held and the function is expected to release it before returning. It
currently fails to do that in all cases which could lead to a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: possible module reference underflow in error path
dst->ops is set on when nft_expr_clone() fails, but module refcount has
not been bumped yet, therefore nft_expr_destroy() leads to module
reference underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
gadgetfs: ep_io - wait until IRQ finishes
after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.
Otherwise complete() from epio_complete() can corrupt stack. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know
that FOLL_FORCE can be possibly dangerous, especially if there are races
that can be exploited by user space.
Right now, it would be sufficient to have some code that sets a PTE of a
R/O-mapped shared page dirty, in order for it to erroneously become
writable by FOLL_FORCE. The implications of setting a write-protected PTE
dirty might not be immediately obvious to everyone.
And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set
pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map
a shmem page R/O while marking the pte dirty. This can be used by
unprivileged user space to modify tmpfs/shmem file content even if the
user does not have write permissions to the file, and to bypass memfd
write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590).
To fix such security issues for good, the insight is that we really only
need that fancy retry logic (FOLL_COW) for COW mappings that are not
writable (!VM_WRITE). And in a COW mapping, we really only broke COW if
we have an exclusive anonymous page mapped. If we have something else
mapped, or the mapped anonymous page might be shared (!PageAnonExclusive),
we have to trigger a write fault to break COW. If we don't find an
exclusive anonymous page when we retry, we have to trigger COW breaking
once again because something intervened.
Let's move away from this mandatory-retry + dirty handling and rely on our
PageAnonExclusive() flag for making a similar decision, to use the same
COW logic as in other kernel parts here as well. In case we stumble over
a PTE in a COW mapping that does not map an exclusive anonymous page, COW
was not properly broken and we have to trigger a fake write-fault to break
COW.
Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e
("mm/mprotect: try avoiding write faults for exclusive anonymous pages
when changing protection") and commit 76aefad628aa ("mm/mprotect: fix
soft-dirty check in can_change_pte_writable()"), take care of softdirty
and uffd-wp manually.
For example, a write() via /proc/self/mem to a uffd-wp-protected range has
to fail instead of silently granting write access and bypassing the
userspace fault handler. Note that FOLL_FORCE is not only used for debug
access, but also triggered by applications without debug intentions, for
example, when pinning pages via RDMA.
This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are
affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR.
Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So
let's just get rid of it.
Thanks to Nadav Amit for pointing out that the pte_dirty() check in
FOLL_FORCE code is problematic and might be exploitable.
Note 1: We don't check for the PTE being dirty because it doesn't matter
for making a "was COWed" decision anymore, and whoever modifies the
page has to set the page dirty either way.
Note 2: Kernels before extended uffd-wp support and before
PageAnonExclusive (< 5.19) can simply revert the problematic
commit instead and be safe regarding UFFDIO_CONTINUE. A backport to
v5.19 requires minor adjustments due to lack of
vma_soft_dirty_enabled(). |
