Export limit exceeded: 414160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (168 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38083 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: prio: fix a race in prio_tune() Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock. | ||||
| CVE-2025-23151 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix race between unprepare and queue_buf A client driver may use mhi_unprepare_from_transfer() to quiesce incoming data during the client driver's tear down. The client driver might also be processing data at the same time, resulting in a call to mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs after mhi_unprepare_from_transfer() has torn down the channel, a panic will occur due to an invalid dereference leading to a page fault. This occurs because mhi_gen_tre() does not verify the channel state after locking it. Fix this by having mhi_gen_tre() confirm the channel state is valid, or return error to avoid accessing deinitialized data. [mani: added stable tag] | ||||
| CVE-2026-63894 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and reads hwreq->req.status before acquiring its own lock. * cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first. The narrower option of clearing priv->req via cmpxchg() in the completion does not close the race: the completion runs without eps_lock, so a cancel path holding eps_lock can still observe priv->req non-NULL, race a concurrent completion that clears and frees, and pass the freed pointer to usb_ep_dequeue(). A slightly longer fix that moves the free into the cleanup work is needed. Same class of lifetime race as the recent usbip-vudc timer fix [1]. Take eps_lock in the sole place that mutates priv->req from the callback direction by moving usb_ep_free_request() out of the completion into ffs_dmabuf_cleanup(), the existing work handler scheduled by ffs_dmabuf_signal_done() on ffs->io_completion_wq. Clear priv->req there under eps_lock before freeing, and only clear if priv->req still names our request (a subsequent ffs_dmabuf_transfer() on the same attachment may have queued a new one). This keeps the existing dummy_hcd sync-dequeue invariant: the completion callback is still invoked by the UDC without eps_lock held (dummy_hcd drops its own lock before calling the callback), and the callback now takes no f_fs lock at all. Serialization against the cancel path happens in cleanup, which runs from the workqueue with no f_fs lock held on entry. The priv ref count protects the containing ffs_dmabuf_priv: ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup drops it via ffs_dmabuf_put(), so priv stays live for the cleanup even after the cancel path's list_del + ffs_dmabuf_put. The ffs_dmabuf_transfer() error path no longer frees usb_req inline: fence->req and fence->ep are set before usb_ep_queue(), so ffs_dmabuf_cleanup() (scheduled by the error-path ffs_dmabuf_signal_done()) owns the free regardless of whether the queue succeeded. Reproduced under KASAN on both detach and close paths against dummy_hcd with an observability hook (kasan_check_byte(priv->req) immediately before usb_ep_dequeue) at the two FunctionFS cancel sites to surface the stale-pointer access; the hook is not part of this patch. The KASAN allocator / free stacks in the captured splats identify the same request: alloc in dummy_alloc_request, free in dummy_timer, fault reached from ffs_epfile_release (close) and from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the patch applied, both paths are silent under the same hook. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace or from a USB host on the cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the filesystem supports uid=, gid=, and fmode= delegation to a non-root gadget daemon, so on real deployments the attacker may be a less-privileged service rather than root. | ||||
| CVE-2026-53357 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. | ||||
| CVE-2026-53303 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation. | ||||
| CVE-2026-53161 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. | ||||
| CVE-2026-53259 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: anycast: insert aca into global hash under idev->lock syzbot reported a splat [1]: a slab-use-after-free in ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash under RCU and dereferences a struct ifacaddr6 that has already been freed while still linked in the hash, so a later reader walks into a dangling node. In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then aca_get() bumps it to 2 to keep it alive across the unlocked region. It is published to idev->ac_list under idev->lock, but ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL) can slip into that window: CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL) ------------------------------ ------------------------------------ aca_alloc() refcnt 1 aca_get() refcnt 2 write_lock_bh(idev->lock) add aca to ac_list write_unlock_bh(idev->lock) write_lock_bh(idev->lock) pull aca off ac_list write_unlock_bh(idev->lock) ipv6_del_acaddr_hash(aca) hlist_del_init_rcu() is a no-op, aca is not in the hash yet aca_put() refcnt 2->1 ipv6_add_acaddr_hash(aca) aca now inserted into the hash aca_put() refcnt 1->0 call_rcu(aca_free_rcu) -> kfree(aca) The hash removal becomes a no-op because the insertion has not happened yet, so once CPU0 inserts and drops the last reference, the aca is freed while still linked in inet6_acaddr_lst[], and readers dereference freed memory after the slab slot is reused. This window opened once RTNL stopped serializing the join path against device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock section so the ac_list and hash insertions are atomic with respect to teardown: a racing remover now either misses the aca entirely or finds it in both lists. acaddr_hash_lock is now nested under idev->lock, which is acquired in softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh() to avoid the irq lock inversion reported in [2]. [1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a [2] https://lore.kernel.org/netdev/6a194ef7.ba3b1513.1890b4.0000.GAE@google.com/ | ||||
| CVE-2026-53162 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed. | ||||
| CVE-2026-53160 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free race in fastrpc_map_create fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero) on this unprotected pointer. A concurrent MEM_UNMAP can free the map between the lock release and the kref operation, resulting in a use-after-free on the freed slab object. Restore the take_ref parameter to fastrpc_map_lookup so the reference is acquired atomically under fl->lock before the pointer is exposed to the caller. | ||||
| CVE-2026-53117 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-46208 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop tp_meter sessions during mesh teardown TP meter sessions remain linked on bat_priv->tp_list after the netlink request has already finished. When the mesh interface is removed, batadv_mesh_free() currently tears down the mesh without first draining these sessions. A running sender thread or a late incoming tp_meter packet can then keep processing against a mesh instance which is already shutting down. Synchronize tp_meter with the mesh lifetime by stopping all active sessions from batadv_mesh_free() and waiting for sender threads to exit before teardown continues. | ||||
| CVE-2026-46025 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1]. | ||||
| CVE-2026-31455 | 1 Linux | 1 Linux Kernel | 2026-06-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | ||||
| CVE-2026-31595 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup Disable the delayed work before clearing BAR mappings and doorbells to avoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-9959 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-05-29 | 3.1 Low |
| Race in WebRTC in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-43415 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op, POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can still be running while ufshcd_vops_suspend() is executing. When UFSHCD_CAP_CLK_GATING is not supported, the condition !hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc() to be executed. Since ufshcd_vops_suspend() typically performs clock gating operations, executing ufshcd_update_rtc() at that moment triggers an SError. The kernel panic trace is as follows: Kernel panic - not syncing: Asynchronous SError Interrupt Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 panic+0x148/0x374 nmi_panic+0x3c/0x8c arm64_serror_panic+0x64/0x8c do_serror+0xc4/0xc8 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x68/0x6c el1_interrupt+0x20/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c ktime_get+0xc4/0x12c ufshcd_mcq_sq_stop+0x4c/0xec ufshcd_mcq_sq_cleanup+0x64/0x1dc ufshcd_clear_cmd+0x38/0x134 ufshcd_issue_dev_cmd+0x298/0x4d0 ufshcd_exec_dev_cmd+0x1a4/0x1c4 ufshcd_query_attr+0xbc/0x19c ufshcd_rtc_work+0x10c/0x1c8 process_scheduled_works+0x1c4/0x45c worker_thread+0x32c/0x3e8 kthread+0x120/0x1d8 ret_from_fork+0x10/0x20 Fix this by moving cancel_delayed_work_sync() before the call to ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is fully completed or cancelled at that point. | ||||
| CVE-2026-43425 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts") | ||||
| CVE-2026-43427 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers. | ||||
| CVE-2026-43484 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flags out of the bitfield word to avoid unrelated RMW side effects in asynchronous contexts. The host->claimed bit shared a word with retune flags. Writes to claimed in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite other bits when concurrent updates happen in other contexts, triggering spurious WARN_ON(!host->claimed). Convert claimed, can_retune, retune_now and retune_paused to bool to remove shared-word coupling. | ||||
| CVE-2026-43121 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_ref race between scrub and refill paths The io_zcrx_put_niov_uref() function uses a non-atomic check-then-decrement pattern (atomic_read followed by separate atomic_dec) to manipulate user_refs. This is serialized against other callers by rq_lock, but io_zcrx_scrub() modifies the same counter with atomic_xchg() WITHOUT holding rq_lock. On SMP systems, the following race exists: CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock) put_niov_uref: atomic_read(uref) - 1 // window opens atomic_xchg(uref, 0) - 1 return_niov_freelist(niov) [PUSH #1] // window closes atomic_dec(uref) - wraps to -1 returns true return_niov(niov) return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE] The same niov is pushed to the freelist twice, causing free_count to exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds write (a u32 value) past the kvmalloc'd freelist array into the adjacent slab object. Fix this by replacing the non-atomic read-then-dec in io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically tests and decrements user_refs. This makes the operation safe against concurrent atomic_xchg from scrub without requiring scrub to acquire rq_lock. [pavel: removed a warning and a comment] | ||||