| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/sqpoll: don't wait for the thread to exit
io_sq_thread_stop() wakes the SQPOLL thread and waits for it to exit.
The thread belongs to the thread group that created the ring, so a
SIGSTOP or the cgroup freezer holds it in get_signal(), and the wake up
doesn't change that. io_ring_exit_work() then sleeps in that wait until
someone continues or kills the process. iou_exit has 64 slots, so 64
closed SQPOLL rings of a stopped process keep every other ring from
being freed, for everyone.
Don't wait. Set the stop bit, wake the thread, and let it exit when it
gets to run again. The sqd can now outlive its last ring, so give it a
second refcount with one reference for the rings and one for the thread,
and free it with the last one. The thread can't reach a freed ring,
rings leave ctx_list before dropping their reference, and the io-wq hash
is refcounted. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: free the task context after a grace period
A task other than the owner can free a request, io_ring_exit_work()
running the local task_work of a DEFER_TASKRUN ring for example, or
io_do_iopoll() reaping completions. io_put_task() then takes the else
branch:
percpu_counter_sub(&tctx->inflight, 1);
if (unlikely(atomic_read(&tctx->in_cancel)))
wake_up(&tctx->wait);
put_task_struct(tctx->task);
The first line is what lets the owner leave io_uring_cancel_generic(),
and on exec it frees the tctx right after. Nothing holds that off for
the remaining three lines, the task reference only covers a tctx freed
along with the task_struct. It used to work out because
io_uring_del_tctx_node() took the uring_lock that the freeing side holds
across io_put_task(), until that moved to tctx_lock.
Free the tctx with kfree_rcu(), and enter an RCU read section in
io_put_task() before the count is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check fork type against dabtree block magic number
LOLLM complains that we fail to flag dabtree blocks that should never be
associated with the file fork -- data forks can't point to xattr leaves,
and attr forks can't point to dirent blocks. Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: fix out_req buffer leak in disable_usb9pfs
usb9pfs->out_req is allocated with alloc_ep_req(), which also
allocates the request's data buffer (req->buf). disable_usb9pfs()
frees it with plain usb_ep_free_request(), which only frees the
usb_request structure itself and leaks req->buf on every close.
Use free_ep_req() instead, matching the allocator, as documented by
its own comment ("Requests allocated via alloc_ep_req() *must* be
freed by free_ep_req()"). |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: fix refcount leak in p9_xen_response() on wrong tag
p9_xen_response() looks up the request for an incoming reply with
p9_tag_lookup(), which takes a reference on the returned p9_req_t. When
the tag does not resolve to a request in REQ_STATUS_SENT, the function
warns and continues the loop without dropping that reference, permanently
leaking the p9_req_t and its msize buffers. The reply header, including
the tag, is supplied by the backend, so a malicious or buggy 9P backend
can leak kernel memory on every crafted response.
Drop the reference before continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
block: restore the iterator when rejecting a misaligned bio
bio_iov_iter_get_pages() can extract some iovecs before encountering a
misaligned one. It releases the pages and rejects the entire bio, but
leaves the supplied iterator advanced.
An iomap direct-I/O caller may subsequently reexpand the iterator's
byte count and fall back to buffered I/O. The reexpanded count then
includes bytes before the iterator's current segment, potentially
causing iterate_iovec() to read beyond the imported iovec array.
In a reproducer using an initial empty iovec followed by 10-byte and
1015-byte segments, writev() returned 1015 instead of 1025 and KASAN
reported an 8-byte read beyond the nine-element iovec allocation.
Saving and restoring the iterator on the rejected-bio path makes
writev() return 1025 and eliminates the KASAN report.
Restore the entire iterator rather than reverting a byte count:
advancing past an empty segment changes its position without consuming
any bytes.
Leave successful and partially accepted bio paths unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Ensure that count is set before access to ent[] __counted_by()
get_supported_features() assigns entries->num_features only after the
memcpy() loop that fills entries->ent[] has already run. Since ent[]
is __counted_by(num_features), the compiler's bounds instrumentation
sees a 0-length array during that loop and FORTIFY_SOURCE trips on
the memcpy. Set @num_features right after allocation, before any
write into ent[], so the bound is correct for the whole lifetime of
the array.
This was found via a fortify panic:
memcpy: detected buffer overflow: 384 byte write of buffer size 0
WARNING: lib/string_helpers.c:1035 at __fortify_report+0x54/0xa0
kernel BUG at lib/string_helpers.c:1043!
Call trace:
__fortify_panic+0x10/0x18
get_supported_features.isra.0+0x4a0/0x4d0 [cxl_core]
devm_cxl_setup_features+0x84/0x120 [cxl_core]
cxl_pci_probe+0x254/0x5e0 [cxl_pci]
Same class of bug, same fix shape as commit 6c9d2e87df40
("cxl/fwctl: Fix __fortify_panic"), which fixed the analogous issue
in cxlctl_get_supported_features() but missed this one.
[ dj: Fixed up title typo per Jonathan. ] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: cancel all matching requests in one pass
With IORING_ASYNC_CANCEL_ALL, __io_async_cancel() calls io_try_cancel()
until nothing is found, and io_poll_cancel() cancels one request per
call, starting each lookup at the beginning of the hash. A cancelled
request stays hashed until its task work runs, so every lookup walks
past the ones already cancelled. Cancelling K of N pending polls visits
about K*N/2 requests in one io_uring_enter(), with uring_lock held.
A single CANCEL_FD|ALL on 80000 polls on one eventfd takes 17.06s,
0.02s with this change. With voluntary preemption the soft lockup
watchdog fires:
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [repro:100]
RIP: 0010:io_cancel_req_match+0x19/0xa0
io_poll_cancel+0x73/0x170
io_try_cancel+0x7b/0xf0
__io_async_cancel+0x41/0x110
Walk the hash once and cancel every match, as io_cancel_remove() does
for futex and waitid. Cancel by user_data only needs its own bucket.
__io_async_cancel() still loops until nothing is found, so a request
that io-wq parks in the poll hash meanwhile is still cancelled.
A cancel that matches one request now walks the whole hash twice instead
of stopping at the match. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/register: enforce per-task restrictions in io_uring_register_blind()
When io_uring_register(2) is invoked with fd == -1, it dispatches
directly to io_uring_register_blind() without checking
current->io_uring_restrict.
As a result, a task with per-task register restrictions installed via
IORING_REGISTER_RESTRICTIONS can still invoke blind registration opcodes
such as IORING_REGISTER_SEND_MSG_RING even when those opcodes are not in
the task's allowed register_op bitmap.
Check current->io_uring_restrict->register_op in
io_uring_register_blind() before dispatching blind registration opcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: mask socket type with SOCK_TYPE_MASK in io_socket_bpf_populate()
When an IORING_OP_SOCKET request is prepared in io_socket_prep(),
sock->type retains creation flags such as SOCK_CLOEXEC and SOCK_NONBLOCK
until __sys_socket_file() masks them off with SOCK_TYPE_MASK during
execution.
However, io_socket_bpf_populate() copies sock->type into
bctx->socket.type without masking off ~SOCK_TYPE_MASK. As a result, a
cBPF filter inspecting bctx->socket.type against socket types such as
SOCK_DGRAM or SOCK_STREAM can be bypassed by ORing SOCK_CLOEXEC or
SOCK_NONBLOCK into the socket type.
Mask sock->type with SOCK_TYPE_MASK when populating bctx->socket.type. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't proceed with xattr repair if the live update fails
LOLLM observes that we ought to make one last check for failed live
updates before replacing the xattr structure. Let's be cautious here. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: always reset completion when disconnecting
When some tx or rx transfers were pending while closing the connection,
the completion handler could catch one pending completion call. To
ensure a normal start when mounting again, we have to reset the
completion and flush any pending completions. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: Fix use-after-free in disable_usb9pfs()
disable_usb9pfs() frees the IN and OUT usb_request objects before it
disables the corresponding endpoints. If either request is still queued,
the later usb_ep_disable() call cancels the endpoint queue and the UDC
driver can still access the already freed request.
With dummy_hcd and KASAN, this is reproducible by queueing the OUT
request and then disconnecting the configfs gadget:
BUG: KASAN: slab-use-after-free in dummy_disable+0x2b4/0x300
Read of size 8 at addr ffff888009702400 by task sh/1
usb_ep_disable+0x8e/0x1f0
usb9pfs_func_unbind+0x193/0x350
gadget_dev_desc_UDC_store+0x135/0x280
dummy_free_request() also warns because the request is freed while its
queue entry is still linked.
Disable both endpoints before freeing the request objects. This lets
usb_ep_disable() cancel any queued transfers and invoke the completion
callback while the request storage is still valid. The request objects
are then freed only after they have been removed from the endpoint
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Validate FFH register fields before hardware access
The x86 CPPC FFH accessors construct masks and shift values using the
firmware's Bit Width and Bit Offset without checking that the field fits
in an MSR. A zero-width field or a field extending beyond bit 63 can
therefore cause an invalid shift. The safe MSR accessors only handle an
access fault, not invalid field arithmetic after a successful read.
Also, the 64-bit GAS address is implicitly narrowed to the 32-bit MSR
number. A descriptor with nonzero upper address bits can access a different
MSR from the one described by firmware.
The arm64 AMU counter readers have the same unchecked field arithmetic.
Validate the field bounds before reading a counter, including both
descriptors in the paired counter path.
Dispatch FFH accesses before decoding the GAS Access Size in the common
read and write paths. Otherwise, a large access_width can trigger an
invalid shift in GET_BIT_WIDTH() before the architecture validates its
register. That field has architecture-specific FFH semantics and is not
needed by the generic memory/port accessor on this path.
Validate x86 MSR addresses and share the field-bounds checks between
related accessors within each architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix clearing folios in memfd_pin_folios()
memfd_pin_folios() pins folios obtained directly from the page cache
without checking whether they are uptodate. However, shmem fallocate()
can leave newly allocated folios uncleared and not uptodate. Callers
such as udmabuf can then expose uninitialized memory to userspace.
Clear non-uptodate folios and mark them uptodate under the folio lock
before returning them to the caller.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description and comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked
extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then
list_first_entry() without holding ptp->tsevqs_lock, the spinlock that
"protects tsevqs from concurrent access". Every other accessor of the
list honours it: ptp_open() (list_add_tail), ptp_release() (list_del
followed by kfree of the per-fd queue), ptp_clock_release() and
ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only
one that does not.
A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and
removed and freed on close(), both under tsevqs_lock:
scoped_guard(spinlock_irq, &ptp->tsevqs_lock)
list_del(&queue->qlist);
bitmap_free(queue->mask);
kfree(queue);
So a read of /sys/class/ptp/ptpN/fifo running concurrently with a
close() of a /dev/ptpN fd can have list_count_nodes() walk into the
queue that close() is removing and freeing, dereferencing freed memory
(use-after-free) or a poisoned list pointer.
Take tsevqs_lock around the list walk. The fifo only ever draws from the
first queue, which is the registration-time queue created in
ptp_clock_register() and freed only in ptp_clock_release(); that cannot
run while the sysfs attribute is being read, so the dequeue from
queue->buf under queue->lock may stay outside tsevqs_lock and the lock
order is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown
A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL
populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs()
*before* the ACL is linked onto tpg->acl_node_list by
target_add_node_acl():
core_tpg_check_initiator_node_acl():
...
core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */
target_add_node_acl(acl); /* only now listed */
The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only
tpg->acl_node_list, so a dev entry whose ACL is still in the window above
is invisible to the sweep and is never disabled. It is left on the
se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when
the same unpacked_lun is later re-added and the se_lun is reallocated at
the same address, the stale dev entry is rediscovered by
target_nacl_find_deve() and core_enable_device_list_for_node() corrupts
lun_deve_list:
BUG: KASAN: slab-use-after-free ...
core_enable_device_list_for_node+0x5ce/0x880
core_tpg_add_node_to_devs+0x169/0x190
core_dev_add_lun+0x146/0x190
target_fabric_port_link+0xe9/0x1b0
configfs_symlink+0x381/0xae0
__x64_sys_symlink+0x55/0x80
The demo-mode login path that drives the ACL/dev-entry creation is
reachable by an unauthenticated initiator; the colliding LUN add/remove is
a local configfs operation.
Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun
shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL
MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode
automatic path, core_tpg_add_node_to_devs() ->
core_enable_device_list_for_node(), was never given the equivalent guard,
and the publish-after-populate ordering in
core_tpg_check_initiator_node_acl() was left unchanged.
Fix it in three cooperating parts:
1) Publish the dynamic NodeACL onto acl_node_list *before* creating its
dev entries, so the teardown sweep can observe them.
2) Refuse to attach a dev entry to an se_lun that is shutting down,
checked under nacl->lun_entry_mutex -- the same lock the sweep takes --
so once the sweep has passed an ACL any later enable for that LUN
observes lun_shutdown and skips it.
3) In core_enable_device_list_for_node(), insert the new dev entry onto
lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both
the replace and the new-entry branch. Previously the entry was added
to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only
after dropping it; with the ACL now published early, the sweep could
take the mutex in that gap, find the entry on the hlist,
core_disable_device_list_for_node() it (list_del() on the not-yet-
linked lun_link succeeds and the entry is freed), and then the enable
would list_add_tail() the freed entry back onto lun_deve_list. Linking
both lists under the mutex makes enable and the sweep mutually
exclusive, closing that window.
core_tpg_add_node_to_devs() already ignores the return value of
core_enable_device_list_for_node(), so a shutting-down LUN is simply
skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: aic79xx: Fix NULL pointer dereference in device reset
Since commit c67e63800446 ("scsi: aic79xx: Do not reference SCSI command
when resetting device") the device reset SCB has no SCSI command, but
ahd_linux_dev_reset() still sets its residual, and ahd_abort_scbs(), which
completes it, sets its status. Seen on an AIC-7902 when a failing disk
triggered a device reset, which killed the SCSI error handler:
BUG: kernel NULL pointer dereference, address: 0000009c
EIP: ahd_linux_dev_reset.cold+0xee/0x26e
Add NULL command checks to the accessors in aic79xx_osm.h. Also skip
autosense for an SCB without a command and complete it with ahd_done()
right away: the REQUEST SENSE path can clear SCB_DEVICE_RESET, after which
ahd_done() would dereference the missing command. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm4: use a full socket for local errors
xfrm4_local_error() passes skb->sk to inet_sk() and ip_local_error()
without ensuring it points to a full socket. TCP SYN-ACK skbs can be owned
by TCP_NEW_SYN_RECV request sockets.
xfrm4_tunnel_check_size() already checks sk_fullsock() since commit
1620c88887b1 ("xfrm: Fix the usage of skb->sk"), so iptfs_is_too_big() is
the only remaining IPv4 caller passing a request socket here: the sk it
tests is the listener, while skb->sk is the request socket.
When IP-TFS rejects such an skb because it exceeds its payload MTU, the
local error path treats the request socket as a struct inet_sock. KASAN
reports a slab-out-of-bounds read in ip_local_error() beyond the
request_sock_TCP allocation.
Resolve the skb owner with skb_to_full_sk() before accessing inet_sock
state or reporting the error. This maps a request socket to its listener
and rejects sockets that cannot be used as full sockets, matching what
commit 6973a21ee73c ("ipv6: xfrm: use full sockets in local error paths")
did for xfrm6_local_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_crtc: fix race with dma_fence_signal() in ::get_driver_name()
Since commit 541c8f2468b9 ("dma-buf: detach fence ops on signal v3"),
I'm seeing the BUG_ON() triggering in drm_crtc's fence_to_crtc() via
drm_crtc_fence_get_driver_name() regularly:
Call trace:
panic+0x58/0x5c
die+0x160/0x178
bug_brk_handler+0x70/0xa4
call_el1_break_hook+0x3c/0x1a0
do_el1_brk64+0x24/0x74
el1_brk64+0x34/0x54
el1h_64_sync_handler+0x80/0xfc
el1h_64_sync+0x84/0x88
drm_crtc_fence_get_driver_name+0x60/0x68 (P)
sync_file_get_name+0x184/0x45c
sync_file_ioctl+0x404/0xf70
__arm64_sys_ioctl+0x124/0x1dc
This looks to be caused by a code flow similar to the following:
+++ snip +++
thread A thread B
ioctl(SYNC_IOC_FILE_INFO)
sync_file_ioctl()
sync_file_get_name()
dma_fence_signal_timestamp_locked() dma_fence_driver_name()
ops = rcu_dereference(fence->ops)
if (!dma_fence_test_signaled_flag())
ops->get_driver_name(fence) i.e.
drm_crtc_fence_get_driver_name()
test_and_set_bit(SIGNALED)
RCU_INIT_POINTER(fence->ops, NULL)
drm_crtc_fence_get_driver_name()
BUG_ON(rcu_access_pointer(fence->ops)
!= &drm_crtc_fence_ops)
+++ snap +++
In other words, a fence's ops pointer can now change to NULL on signal,
which wasn't the case before the culprit commit and hence the BUG_ON()
triggers.
Simply drop the BUG_ON() as it's usage of fence ops is invalid now, and
because using BUG_ON() and friends to take down the system is an
unacceptable way to handle a failure.
Note that the adjacent drm_crtc_fence_get_timeline_name() has the same
problem and is fixed by this patch as well. |