| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix DPT allocation paths.
Remove the fallback for VRAM to system memory, I tested it and that
doesn't work at all, only a black screen with pipe fault errors were
observed.
On systems with media GT, extra latency is added when accessing stolen
memory when the GT is in MC6. Since we additionally aren't counting how
much memory is used for stolen and we could in theory fill up the
entire stolen area with DPT's, avoid using stolen and only use the
default memory region.
Using stolen may also result in random system hangs under load.
(cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0) |
| Two case-insensitive comparisons on request-derived usernames outside the main authorization path in CUPS's scheduler (printer ACL validation and private-attribute filtering) could allow bypass of username-based access controls in certain configurations. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and lock_sock(), the reference taken by iso_get_sock() may be the last
one: the close path drops the link-list reference, and once
iso_conn_ready() drops its own reference at the end of the function the
socket is freed. The child socket, however, is already linked to the
freed parent, and a later disconnect of the child runs iso_chan_del()
-> bt_accept_unlink(), which dereferences the dangling parent pointer
into the freed accept queue (a use-after-free). The same dangling
pointer is also dereferenced through parent->***() in
iso_chan_del().
Fix it the same way the connected (non-BIS) path was fixed in commit
0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"):
after taking the socket lock, re-check that the parent is still a
listening, alive socket, and bail out otherwise. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity (XXE) injection flaw. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity (XXE) injection. |
| MantisBT is an open source bug tracker. Versions 2.28.3 and earlier contain a critical authentication bypass in the SOAP API's mci_check_login() function. Any user knowing any valid cookie_string can authenticate as any other user (knowing their username), including the administrator, without knowing the target's password. The vulnerability is exploitable with zero prior access on default MantisBT installations because self-registration is enabled by default ($g_allow_signup = ON). A self-registered user can use their own cookie_string (readable from their browser's MANTIS_STRING_COOKIE cookie after login) to impersonate the administrator via the SOAP API. The REST API is NOT affected. The REST API's AuthMiddleware derives the username server-side from the API token or session cookie, so the username cannot be spoofed. The Web UI is NOT affected. The Web UI authenticates via PHP session cookies (PHPSESSID) and validates the MANTIS_STRING_COOKIE against the logged-in user through auth_is_cookie_valid(). The username is derived server-side from the cookie, not supplied by the client. Version 2.28.4 contains a patch. No known workarounds are available. |
| A flaw was found in the OCAPI modules (ocapi_command, ocapi_info) of the
community.general Ansible collection. The shared OCAPI request helper disables
TLS certificate validation on every request and the modules expose no parameter
to re-enable it, while sending HTTP Basic-Auth credentials to an https endpoint.
An attacker positioned on the network path between the Ansible controller and the
OCAPI-managed storage/enclosure device can present any certificate, intercept the
session, capture the credentials, and tamper with responses. |
| The cupsUTF32ToUTF8() function in CUPS's cups/transcode.c lacks a source-length bound and can read past the end of the source buffer, resulting in a heap out-of-bounds read. This is reachable via SNMP supply-description parsing in backend/snmp-supplies.c with attacker-controlled content. |
| A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user. |
| A flaw was found in the memcached cache plugin of the community.general Ansible
collection. Although its documentation states that records are stored in JSON
format, the plugin performs no explicit serialization and relies on
python-memcached, which pickles values on write and unpickles them on read.
Because memcached is unauthenticated and cache keys are predictable, an attacker
able to reach a network-exposed or shared memcached instance can write a crafted
pickle payload that is deserialized and executed on the Ansible controller when
the poisoned fact cache is next read, leading to remote code execution. |
| A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination. |
| A double free issue has been identified in libarchive's RAR5 reader. During parsing of a specially crafted RAR5 archive, the filtered_buf pointer may remain stale after being freed during unpacking state reinitialization. Subsequent processing of another archive entry can trigger a second free of the same memory region, resulting in a double-free condition. Successful exploitation may cause applications using the vulnerable libarchive API to terminate unexpectedly, leading to a denial of service. |
| Dell iDRAC9, 14G versions prior to 7.00.00.184, 15G/16G versions prior to 7.30.10.50, and Dell iDRAC10, 17G versions prior to 1.30.30.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command injection. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
