| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In updateProvidersWhenServiceRemoved of CredentialManagerService.java, there is a possible way to override settings across users due to a permissions bypass. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from a "STACKTRACE" histogram key
"cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined
with an offset and a size of zero so that the filter code can match them
by name. parse_field() maps them onto their common_* equivalents for
backward compatibility, but unlike the common_* names it hands the
placeholder back to the caller instead of NULL.
create_hist_field() takes a non-NULL field as a promise that the record
carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc
word is read from offset 0, that is from common_type, and its low 16
bits are followed as an offset into the record. What is found there
becomes the length of an unbounded memcpy. Pick an event whose id is
small enough that the offset stays inside its own record and the length
is a kernel text address:
# cd /sys/kernel/tracing
# echo 'hist:keys=STACKTRACE' > events/ftrace/print/trigger
# echo hello > trace_marker
Oops: general protection fault, probably for non-canonical address
RIP: 0010:rb_next+0x23/0x60
</IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x2e7/0x12c0
Kernel panic - not syncing: Fatal exception in interrupt
Leave the field NULL, which is what the comment above the branch says
the code does and what common_stacktrace already does. FILTER_CPU and
FILTER_COMM are left alone, their create_hist_field() branches never
look at the field. |
| A stored cross-site scripting vulnerability via appended strings in email form fields exists in baserCMS. If this vulnerability is exploited, an arbitrary script may be executed in the user's web browser. |
| The BackupSheep WordPress Backup Plugin WordPress plugin through 1.8 does not properly validate its integration key, treating an unset or blank key as valid, which allows unauthenticated attackers to create and download full site backups, including the database with user password hashes, and to delete arbitrary files on the server, leading to sensitive data disclosure and site takeover.
The BackupSheep WordPress Backup Plugin WordPress plugin through 1.8 has been closed on WordPress.org since July 2024 and no fixed version is available. Remove it from any site where it is installed. |
| The Paytm Payment Gateway WordPress plugin before 2.8.9 does not properly escape data taken from payment callbacks before using it in a SQL statement, and the integrity check on those callbacks can be forged when the gateway is enabled without credentials, allowing unauthenticated users to perform SQL injection attacks. |
| The If-So Dynamic Content WordPress plugin before 1.10.2 does not escape a request-supplied value before reflecting it in an unauthenticated AJAX response that is served as HTML, allowing attackers to execute arbitrary JavaScript in the browser of a visitor who opens a crafted link. |
| The Payments for Hubtel WordPress plugin before 1.0.2 does not verify that the requester is authorized to view an order before redirecting a public payment-callback request, allowing unauthenticated attackers to obtain the order key of an arbitrary order and view its contents. |
| Tugtainer is a self-hosted app for automating updates of Docker containers. Prior to version 1.30.3, Tugtainer's OIDC authentication can still be initiated even when OIDC_ENABLED=false. The /auth/oidc/enabled endpoint correctly reports that OIDC is disabled. However, a direct request to /auth/oidc/login still starts the OIDC login flow, returns HTTP 302, sets an oidc_state cookie, and redirects the user to the configured OIDC authorization endpoint. This bypasses the intended OIDC disable switch. This issue has been patched in version 1.30.3. |
| basic-ftp is an FTP client for Node.js. Prior to 6.2.1, Client.list() can be forced by a malicious or compromised FTP server to spend quadratic CPU time parsing a directory listing because the RE_LINE expression in src/parseListUnix.ts backtracks across adjacent variable-length owner and group fields when a long Unix-style line has a valid prefix but cannot satisfy the later size and date fields. parseList() selects a parser from the last nonblank line and then applies it to every line, so a normal final line can select the Unix parser while an earlier crafted line blocks the Node.js event loop and freezes the process. This issue is fixed in version 6.2.1. |
| Kiteworks Core before version 9.5.0 is vulnerable to Arbitrary File Write. An improper restriction of a user-supplied file path in a Kiteworks administrative export feature could allow an authenticated administrator to write a file to an arbitrary location on the underlying host, potentially leading to command execution on the appliance. Exploitation requires an existing, authenticated administrative account with access to the affected export function. |
| A system notification template on the Kiteworks appliance was rendered by a template engine that evaluated expressions contained in the stored template body. An authenticated System Administrator could potentially store a crafted template that executed operating-system commands on the appliance when the notification was next sent. |
| A stored cross-site scripting (XSS) weakness in Kiteworks Core could allow an administrator holding only a single, narrowly scoped delegated permission to store crafted content that later executes arbitrary JavaScript in the authenticated session of a System Administrator who views the affected page. This could have permitted the lower-privileged administrator to escalate to full administrative control of the tenant, including the creation of a new administrative account. |
| A privilege escalation vulnerability in Kiteworks could have allowed an attacker who had already obtained code execution on one node of a clustered Kiteworks deployment to run operating system commands with elevated privileges on another node of the same cluster. Insufficient input validation in an internal cluster management function let attacker-supplied values reach a privileged execution context; exploitation requires existing access to a node in the cluster, and the affected function is not reachable from outside the cluster. |
| MISP contains a vulnerability in its two-factor authentication (TOTP) verification process that permits a valid one-time code to be accepted more than once within its time-based validity window.
The issue exists in the user login flow where a TOTP code is verified as a second authentication factor. Because the system did not record whether a given TOTP period had already been consumed, the same code remained valid for its entire time window (typically 30 seconds). An attacker who captures a legitimate code during a user's login could replay it to authenticate a second session as that user.
Preconditions:
- The target user has TOTP-based two-factor authentication enabled.
- The attacker is in a position to observe or intercept the TOTP code during a legitimate login (e.g., network-level interception, shoulder surfing, or a compromised client).
- The replay must occur within the TOTP validity period.
Security impact:
- Unauthorized account access by replaying a captured one-time code.
- Potential compromise of threat-intelligence data and administrative functions accessible to the targeted user.
Affected versions: <v2.5.48. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| A stored cross-site scripting vulnerability via custom content descriptions exists in baserCMS. If this vulnerability is exploited, an arbitrary script may be executed in the user's web browser. |
| Tugtainer is a self-hosted app for automating updates of Docker containers. Prior to version 1.30.4, Tugtainer Agent allows unauthenticated access to Docker management APIs when AGENT_SECRET is not configured. The Agent uses request signatures to protect its API routes. However, in agent/auth.py, the signature verification function returns successfully if Config.AGENT_SECRET is empty. This causes protected Agent APIs to become accessible without authentication. This issue has been patched in version 1.30.4. |
| Tugtainer is a self-hosted app for automating updates of Docker containers. Prior to version 1.30.6, Tugtainer allows an authenticated user to make the backend server send outbound HTTP requests to arbitrary user-supplied URLs through the notification test endpoint. The /settings/test_notification endpoint accepts a urls field and passes it directly to Apprise without restricting protocols, hostnames, localhost addresses, private IP ranges, or cloud metadata addresses. This can be abused as an authenticated blind server-side request forgery (SSRF). This issue has been patched in version 1.30.6. |
| The Featured Image from URL (FIFU) WordPress plugin before 6.0.8, Featured Image from URL (FIFU) Premium WordPress plugin before 8.2.8 do not correctly enforce the REST API nonce, disabling the check for the whole request when a crafted URL is used, which could allow attackers to make a logged-in administrator perform any REST API action, such as creating a new administrator account, via a CSRF attack. |
