| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free in x25_kill_by_neigh()
x25_kill_by_neigh() walks the global X.25 socket list looking for sockets
attached to a terminating neighbour. x25_list_lock protects list membership
while the lookup is in progress, but it does not pin a socket's lifetime
after the lock is dropped.
The function currently drops x25_list_lock before calling lock_sock(s). A
concurrent close can run x25_release(), remove the same socket from
x25_list, and drop the last socket reference in that window. The neighbour
teardown path can then lock or inspect a freed struct sock/struct x25_sock.
Take sock_hold(s) while x25_list_lock still proves that the list entry is
live, then drop the temporary reference after the socket has been locked,
rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(),
because another path may have disconnected the socket before this path
acquired the socket lock. Restart the list walk after each disconnect
because the list lock was dropped and the previous iterator state may no
longer be valid.
A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in
x25_kill_by_neigh(). |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
net: slip: serialize receive against buffer reallocation
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: fix out-of-bounds bitmap_set() with zero-length range
ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk
as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the
unsigned subtraction underflows to SIZE_MAX, producing a huge
last_blk and nr_blks value that causes bitmap_set() to write far
beyond the ifs->state allocation.
Regarding ifs_set_range_uptodate(), it is temporarily safe because len
cannot be passed in as 0. However, for ifs_set_range_dirty() this is
reachable from __iomap_write_end(): when copy_folio_from_iter_atomic()
returns 0 (e.g. user buffer fault) and the folio is already uptodate,
the guard at the top of __iomap_write_end() does not trigger because
!folio_test_uptodate() is false, and iomap_set_range_dirty() is called
with copied == 0.
Add a !len guard to both functions before the computation, so that a
zero-length range is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Add missing superblock check in find_or_insert_direct_key()
The legacy 'fscrypt_direct_keys' table caches master keys that are used
by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY.
It's just a global table for all filesystems (since the keys can be
provided by the legacy process-subscribed keyrings mechanism, which
makes it difficult to reuse super_block::s_master_keys).
The entries in it ('struct fscrypt_direct_key') do contain a super_block
pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when
the last inode that references the key is evicted.
However, when finding the fscrypt_direct_key for an inode, we weren't
actually comparing the super_block pointer. As a result, inodes with
different super_blocks could point to the same fscrypt_direct_key. That
could extend the lifetime of a fscrypt_direct_key beyond the
super_block it points to, causing a use-after-free later.
Fix this by creating distinct fscrypt_direct_key structs for distinct
super_block structs.
Note that this problem doesn't exist in the v2 policy equivalent
("per-mode keys"), since the data structures there are per super_block. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: preserve ACL_DONT_CACHE state in forget_cached_acl()
The ACL_DONT_CACHE state is meant to be a constant state for the inode
for filesystems that want to opt out of posix acl caching.
Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api")
used this facility to opt out of posix acl caching for fuse inodes with
fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl).
The commit also takes care to gate the forget_all_cached_acls() call in
fuse_set_acl() on fc->posix_acl because there is no need for it, but
there are other placed in fuse code which call forget_all_cached_acls()
unconditional to fc->posix_acl and those cause the loss of the
ACL_DONT_CACHE state.
This is not only a functional bug. Properly timed, a get_acl() from this
fuse filesystem can return a stale cached value, as was observed in tests,
because set_acl() does not invalidate the unintentional acl cache.
We could fix this in fuse, but it actually makes no sense for the vfs
helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so
let it not do that to fix fuse and future users of ACL_DONT_CACHE. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/super: fix emergency thaw double-unlock of s_umount
do_thaw_all() iterates over all superblocks via __iterate_supers()
with SUPER_ITER_EXCL, which acquires s_umount exclusively before
calling the callback and releases it afterwards. However, the
callback do_thaw_all_callback() calls thaw_super_locked() which
unconditionally releases s_umount on every code path. This results
in a second unlock attempt in __iterate_supers() that corrupts the
rwsem state, triggering a DEBUG_RWSEMS warning:
[ 182.601148] sysrq: Emergency Thaw of all frozen filesystems
[ 182.601865] ------------[ cut here ]------------
[ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty
[ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53
[ 182.604578] Modules linked in:
[ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy)
[ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014
[ 182.606417] Workqueue: events do_thaw_all
[ 182.606750] RIP: 0010:up_write+0xaf/0x170
[ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d
[ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246
[ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870
[ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10
[ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80
[ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000
[ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800
[ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000
[ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0
[ 182.613722] Call Trace:
[ 182.613946] <TASK>
[ 182.614130] __iterate_supers+0x128/0x150
[ 182.614463] do_thaw_all+0x1b/0x30
[ 182.614759] process_scheduled_works+0xbb/0x3f0
[ 182.615150] ? __pfx_worker_thread+0x10/0x10
[ 182.615499] worker_thread+0x129/0x270
[ 182.615816] ? __pfx_worker_thread+0x10/0x10
[ 182.616201] kthread+0xe2/0x120
[ 182.616469] ? __pfx_kthread+0x10/0x10
[ 182.616792] ret_from_fork+0x15b/0x240
[ 182.617115] ? __pfx_kthread+0x10/0x10
[ 182.617426] ret_from_fork_asm+0x1a/0x30
[ 182.617761] </TASK>
[ 182.617968] ---[ end trace 0000000000000000 ]---
[ 182.618412] Emergency Thaw complete
Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount
in the callback via super_lock_excl() before calling
thaw_super_locked(). This matches the locking pattern expected by
thaw_super_locked() and eliminates the double unlock.
While at it, remove the dead 'return;' at the end of
do_thaw_all_callback(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. For dynamic
events, the union member is 'refcnt', which acts as an active
reference counter.
When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or
wprobe) has a non-zero reference count (e.g. due to active event
triggers or perf attachments), its 'call->module' evaluates to a
small non-zero integer instead of NULL.
When filtering or setting events for a specific module (e.g., writing
':mod:<module>' to 'set_event'), the code in
'__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads
'call->module' directly without checking whether the event is dynamic.
This causes the kernel to treat the small integer (refcnt) as a
'struct module' pointer, leading to a NULL/invalid pointer dereference
(Oops) when dereferencing the module name.
Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked
before treating 'call->module' as a valid pointer in these code paths. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: fix use-after-free in AMT delayed works
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: prevent registration of special VMAs
Vova Tokarev says:
userfaultfd allows registration on shadow stack VMAs. With userfaultfd
access, you can register on the shadow stack, discard a page ... and
inject a page with chosen return addresses via UFFDIO_COPY.
Update vma_can_userfault() to reject VM_SHADOW_STACK.
While on it, also reject VM_SPECIAL so that if a driver would implement
vm_uffd_ops, it wouldn't be possible to register special VMAs with
userfaultfd.
Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude
hugetlb VMAs from the check for VM_SPECIAL. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix afs_edit_dir_remove() to get, not find, block 0
Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather
than afs_dir_find_block() as the latter caches the found block in the
afs_dir_iter and may[*] switch out the page it's on if another
afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does.
[*] There's more than one block per page. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: userspace: fix use-after-free in get_local_id
In mptcp_pm_userspace_get_local_id(), the address entry is looked up under
spinlock, but its id is read after dropping the lock. A concurrent deletion
can free the entry between the unlock and the read, leading to UAF.
The race window is narrow. It was reproduced only with a locally
constructed stress test that repeatedly overlaps an MP_JOIN SYN with a
MPTCP_PM_CMD_SUBFLOW_DESTROY request.
However, the KASAN report below confirms that the race is reachable:
[ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0
...
[ 666.319401] Call Trace:
[ 666.319405] <IRQ>
[ 666.319408] dump_stack_lvl+0x53/0x70
[ 666.319412] print_address_description.constprop.0+0x2c/0x3b0
[ 666.319418] print_report+0xbe/0x2b0
[ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319423] kasan_report+0xce/0x100
[ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319433] mptcp_pm_get_local_id+0x371/0x440
...
[ 666.319821] Allocated by task 45539:
[ 666.319844] kasan_save_stack+0x33/0x60
[ 666.319855] kasan_save_track+0x14/0x30
[ 666.319858] __kasan_kmalloc+0x8f/0xa0
[ 666.319863] __kmalloc_noprof+0x1e7/0x520
[ 666.319867] sock_kmalloc+0xdf/0x130
[ 666.319885] sock_kmemdup+0x1b/0x40
[ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500
[ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610
...
[ 666.319967] Freed by task 45560:
[ 666.319988] kasan_save_stack+0x33/0x60
[ 666.319991] kasan_save_track+0x14/0x30
[ 666.319994] kasan_save_free_info+0x3b/0x60
[ 666.319998] __kasan_slab_free+0x43/0x70
[ 666.320000] kfree+0x166/0x440
[ 666.320003] sock_kfree_s+0x1d/0x50
[ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200
[ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0
Fix by copying the id into a local variable while still holding the lock,
and use -1 as a "not found" sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix stale skb->sk reference on subflow close
The backlog list is updated by mptcp_data_ready() under
mptcp_data_lock(). The cleanup of backlog references to a closing
subflow, however, was performed in mptcp_close_ssk(), before
__mptcp_close_ssk() acquires the ssk lock, and while holding neither
the ssk lock nor mptcp_data_lock().
Because that traversal ran without mptcp_data_lock(), concurrent softirq
RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready()
-> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog
entry referencing the ssk while the cleanup loop was in progress. Such
an entry could be missed by the cleanup, or the concurrent list update
could corrupt the traversal, leaving skb->sk pointing at the ssk after
it is freed.
A later mptcp_backlog_purge() then dereferences the stale pointer,
triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0)
followed by a use-after-free in mptcp_backlog_purge().
Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after
subflow->closing is set to 1 and while the ssk lock is still held,
serialized under mptcp_data_lock(). The cleanup runs only on the push
path (MPTCP_CF_PUSH), where backlog references accumulate; on other
teardown paths the caller already handles cleanup.
With subflow->closing set and mptcp_data_lock() held across the purge,
any concurrent mptcp_data_ready() either completes its enqueue before
the purge runs and is caught, or observes closing=1 and bails out. Once
mptcp_data_unlock() is reached, no new skb referencing the ssk can be
enqueued, so the cleanup is exhaustive.
Remove the unprotected traversal from mptcp_close_ssk() entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Delay module ref count for "enable_event" trigger
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: only unlock nsm_dev on post-lock error paths
nsm_dev_ioctl() jumps to the common out label even when the initial
copy_from_user() fails before nsm->lock has been taken. The error path
then blindly unlocks a mutex that was never acquired.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the miscdevice ioctl entry and the pre-lock
copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing
NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the
shared out label before mutex_lock(&nsm->lock). Lockdep reported:
WARNING: bad unlock balance detected!
exploit/193 is trying to release lock (&global_nsm.lock) at:
nsm_dev_ioctl+0x5f/0xcf [vuln_msv]
but there are no more locks to release!
no locks held by exploit/193.
Return immediately on the pre-lock copy_from_user() failure and keep the
common unlock label for the post-lock paths only. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix MSC output device reference leak
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234da ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops. |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
