Export limit exceeded: 378655 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378655 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74376 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: reset read_slot when reusing r10bio for discard put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. | ||||
| CVE-2026-74365 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh. | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-74330 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix lockless traversals of ->s_children Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. | ||||
| CVE-2026-74316 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Handle layout stid in nfsd4_drop_revoked_stid() nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a client sends FREE_STATEID for an admin-revoked layout stid, the default branch releases cl_lock and returns without unhashing or releasing the stid. The stid remains in the IDR and on the per-client list until the client is destroyed. Remove the layout stid from the per-client list and call nfs4_put_stid() to drop the creation reference. When the refcount reaches zero, nfsd4_free_layout_stateid() handles the remaining cleanup: cancelling the fence worker, removing from the per-file list, and freeing the slab object. | ||||
| CVE-2026-74310 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vhost/net: complete zerocopy ubufs only once vhost-net initializes one ubuf_info per outstanding zerocopy TX descriptor and hands it to the backend socket. The networking stack may then clone a zerocopy skb before all skb references are released. For example, batman-adv fragmentation reaches skb_split(), which calls skb_zerocopy_clone() and increments the same ubuf_info refcount. vhost_zerocopy_complete() currently treats every ubuf callback as a completed vhost descriptor. It dereferences ubuf->ctx, writes the descriptor completion state, and drops the vhost_net_ubuf_ref even when the callback only releases a cloned skb reference. A backend reset can therefore wait for and free the vhost_net_ubuf_ref while another cloned skb still carries the same ubuf_info. A later completion then dereferences the freed ubufs pointer. KASAN reports the stale completion as: BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x1d7/0x1f0 BUG: KASAN: slab-use-after-free in vhost_zerocopy_complete+0x101/0x1f0 vhost_zerocopy_complete skb_copy_ubufs __dev_forward_skb2 veth_xmit The freed object was allocated from vhost_net_ioctl() while setting the backend and freed through kfree_rcu()/kvfree_rcu_bulk after backend removal, while delayed skb completion still reached vhost_zerocopy_complete(). Honor the generic ubuf_info refcount before touching vhost state, and run the vhost descriptor completion only for the final ubuf reference. This matches the msg_zerocopy_complete() ownership rule for cloned zerocopy skbs. | ||||
| CVE-2026-74305 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Tighten cgroup storage cookie checks for prog arrays The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge. | ||||
| CVE-2026-74287 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded address parameter length sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths. | ||||
| CVE-2026-74285 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: Stop leased rxq before uninstalling its memory provider netif_rxq_cleanup_unlease() tears down the memory provider that was installed on a physical RX queue through a netkit queue lease. It currently revokes the provider's DMA mappings before stopping the physical queue: __netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */ __netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */ This inverts the ordering used by the regular teardown paths (normal device unregister and the io_uring zcrx close path), which stop the queue before revoking the provider's mappings. With the physical queue still live, its NAPI can keep consuming net_iov entries from the page_pool alloc cache after the __netif_mp_uninstall_rxq() has already cleared their dma_addr, opening a window for the device to DMA to a stale or zero address. Fix it by swapping the two calls so the queue is stopped (and its NAPI quiesced) before the provider is uninstalled. No functional regression was observed across repeated runs of the nk_qlease.py HW selftest, which exercises the lease teardown path; this was tested against fbnic QEMU emulation. | ||||
| CVE-2026-74268 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too. | ||||
| CVE-2026-74264 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | ||||
| CVE-2026-74260 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers. This patch also disables BH when transmitting the skb to address a possible migration to different CPU leading to imbalanced decrementation of the recursion counters. This is modeled after Florian Westphal's dev_xmit_recursion*() API available since commit 97cdcf37b57e ("net: place xmit recursion in softnet data") according to its current state in the tree. | ||||
| CVE-2026-72496 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.2 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status. | ||||
| CVE-2026-72495 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid repeated requests to allocate WC pages Applications can request multiple WC pages for the same ucontext. As of now, only 1 WC page per ucontext is supported. Add a lock to avoid concurrent access and a check to fail repeated requests. Also, if the mmap entry insert fails for the WC, free the Doorbell page index mapped for the WC page. | ||||
| CVE-2026-72492 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in same_client_has_lease() same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned reference in smb_grant_oplock() after copying the lease state. | ||||
| CVE-2026-72462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72407 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated on gs->gro_hint, geneve_gro_complete() re-derives the inner dispatch type and length from the packet and the current gs->gro_hint, independently of geneve_gro_receive(). The two can disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/ geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if the re-read option bytes differ from the ones receive parsed. geneve_gro_receive() already records the inner network header position in NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case where eth_gro_complete() steps over the inner MAC header, and bail out if it lands past inner_network_offset. Use a lower bound rather than exact equality: between gh_len and the inner L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag (vlan_gro_receive() advances the recorded offset past it), which only moves inner_network_offset further out. A valid frame therefore always satisfies inner_nh <= inner_network_offset, while a gh_len inflated by a hint gro_receive() did not honour dispatches past the validated inner header, i.e. the out-of-bounds completion. Only the latter is rejected. | ||||