Export limit exceeded: 370492 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (88398 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64296 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer. | ||||
| CVE-2026-64293 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read The bound-check in iommufd_veventq_fops_read() for the normal vEVENT path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr): if (!vevent_for_lost_events_header(cur) && sizeof(hdr) + cur->data_len > count - done) { hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr) evaluates to the size of the pointer. Surrounding code uses sizeof(*hdr) consistently: if (done >= count || sizeof(*hdr) > count - done) { ... if (copy_to_user(buf + done, hdr, sizeof(*hdr))) { ... done += sizeof(*hdr); struct iommufd_vevent_header is currently 8 bytes (two __u32 fields, flags and sequence), so on 64-bit (sizeof(void *) == 8) the two expressions happen to be equal and the check works as intended. On 32-bit (sizeof(void *) == 4) the check under-counts the header by 4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed count - done while 4 + cur->data_len does not will pass the check, then the loop will copy_to_user 8 bytes of header followed by data_len bytes of payload, writing past the user-supplied buffer. It is also a latent bug for any future expansion of struct iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check should not depend on the type happening to match the host pointer width. Use sizeof(*hdr) to match the rest of the function and the actual amount that will be copied. | ||||
| CVE-2026-64286 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vCPU context into the hyp's private vCPU on every run. ctxt_to_vcpu() expects a guest context to have a NULL __hyp_running_vcpu, which is only ever set on the host context, so that it resolves the vCPU via container_of(). While this is generally the case, flush_hyp_vcpu() copies the context verbatim and does not enforce this, so a value provided by the host is dereferenced at EL2 (host -> EL2). Fix by clearing __hyp_running_vcpu after the copy. | ||||
| CVE-2026-64281 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] | ||||
| CVE-2026-64280 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. | ||||
| CVE-2026-64277 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting. | ||||
| CVE-2026-64276 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. | ||||
| CVE-2026-64266 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning. | ||||
| CVE-2026-64261 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues fuse_uring_async_stop_queues() might run when the last reference on ring->queue_refs was already dropped. In order to avoid an early destruction a reference on struct fuse_conn is now taken before starting fuse_uring_async_stop_queues() and that reference is only released when that delayed work queue terminates. | ||||
| CVE-2026-64260 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid queue->stopped races and set/read that value under lock There are several readers of queue->stopped that check the value under lock, but fuse_uring_commit_fetch() did not and actually the value was not set under the lock in fuse_uring_abort_end_requests() either. Especially in fuse_uring_commit_fetch it is important to check under a lock, because due to races 'struct fuse_req' might be freed with fuse_request_end, but another thread/cpu might already do teardown work. | ||||
| CVE-2026-64259 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: make a fuse_req on SQE commit only findable after memcpy Bad userspace might try to trick us and send commit SQEs request unique / commit-id of requests that are not even send to fuse-server (io_uring_cmd_done() not called) yet. fuse_uring_commit_fetch() ends the fuse request when the ring entry has a wrong state, but that could have caused a use-after-free with the memcpy operations in fuse_uring_send_in_task(). In order to avoid such races the call of fuse_uring_add_to_pq() is moved after the copy operations and just before completing the io-uring request - malicious userspace cannot find the request anymore until all prepration work in fuse-client/kernel is completed. This also moves fuse_uring_add_to_pq() a bit up in the code to avoid a forward declaration. Also not with a preparation commit, to make it easier to back port to older kernels. | ||||
| CVE-2026-64255 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: validate sta_mask before ffs() in BA session handlers Three BA session handlers use ffs(ba_data->sta_mask) - 1 to derive a station ID without checking that sta_mask is non-zero. When sta_mask is zero, ffs() returns 0 and the subtraction wraps to 0xFFFFFFFF, causing an out-of-bounds access on fw_id_to_link_sta[]. Add WARN_ON_ONCE(!ba_data->sta_mask) guards before each ffs() call, consistent with the existing check in iwl_mld_ampdu_rx_start(). | ||||
| CVE-2026-64251 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next() pwrseq_debugfs_seq_next() declares 'next' with __free(put_device), which causes put_device() to be called on the returned pointer when the variable goes out of scope. This results in a use-after-free since the seq_file framework receives a pointer whose reference has already been dropped. Simply removing __free(put_device) would fix the UAF but would leak the reference acquired by bus_find_next_device(), as stop() only calls up_read(&pwrseq_sem) and never releases the device reference. Fix this by making the reference counting consistent across all seq_file callbacks, matching the standard pattern used by PCI and SCSI: - start(): use get_device() so it returns a referenced pointer. - next(): explicitly put_device(curr) to release the previous device's reference (no NULL check needed - the seq_file framework only calls next() while the previous return was non-NULL). - stop(): put_device(data) to release the last iterated device's reference, with a NULL guard since stop() may be called with NULL when start() returned NULL or next() reached end-of-sequence. | ||||
| CVE-2026-64247 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Failure to check the bounds of the VP ID leads to an out-of-bounds read when testing the sparse bank, and super strictly speaking could lead to KVM performing an unnecessary TLB flush for an L2 vCPU. ================================================================== BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm] Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802 CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5d0 kasan_report+0xb4/0xe0 kasan_check_range+0x35/0x1b0 hv_is_vp_in_sparse_set+0x85/0x100 [kvm] kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm] kvm_hv_hypercall+0xe6b/0x1e60 [kvm] vmx_handle_exit+0x485/0x1b60 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm] kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0xb9/0xcf0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f0e62d1a9bf </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f flags: 0x4000000000000000(zone=1) raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000 raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Opportunistically add a compile time assertion to ensure the maximum number of sparse banks exactly matches the number of possible bits in the passed in mask. [sean: add KASAN splat, drop comment, add assert, massage changelog] | ||||
| CVE-2026-64243 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-64223 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. | ||||
| CVE-2026-64222 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. | ||||
| CVE-2026-64221 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | ||||
| CVE-2026-64219 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) | ||||