| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host
lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to
__swap_cgroup_id_lookup() without checking that the type was ever
registered via swap_cgroup_swapon(). On a swapless host every ctrl->map
is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled
swp_offset().
Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for
zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls
lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a
real swap entry, without first validating it against swap_info[]. A
single PTE corrupted into a type-0 swap entry takes the host down at
process exit.
We hit this in production on a swapless 6.12.58 host: ~1s of
"get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being
correctly defensive about the same entry) followed by
BUG: unable to handle page fault for address: 000003f800204220
RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60
Call Trace:
swap_pte_batch+0xbf/0x230
zap_pte_range+0x4c8/0x780
unmap_page_range+0x190/0x3e0
exit_mmap+0xd9/0x3c0
do_exit+0x20c/0x4b0
syzbot has reported the identical stack.
The source of the PTE corruption is a separate bug; this change makes the
teardown path as robust as the fault path already is. Every other caller
of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has
already validated the entry, so the new branch is cold. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psample: fix info leak in PSAMPLE_ATTR_DATA
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B. |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
Due to a race condition between nf_tables netlink control plane transaction and nft_set element garbage collection, it is possible to underflow the reference counter causing a use-after-free vulnerability.
We recommend upgrading past commit 3e91b0ebd994635df2346353322ac51ce84ce6d8. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
