| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling ->init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nstree: check listing permission before taking a namespace reference
legitimize_ns() takes a reference on the candidate namespace before
may_list_ns() has decided whether the caller may see it. The
__free(ns_put) cleanup on the denied path can drop the last reference to a
mount namespace while we still hold the rcu read lock, and put_mnt_ns()
may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make
sure reference are dropped outside of rcu lock") fixed for the put_user()
path. Neither ns_requested() nor may_list_ns() needs a reference, both
only look at the namespace type and at the caller's own namespaces, so do
the checks first and take the reference last.
Splat:
Voluntary context switch within RCU read-side critical section!
WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442
CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy)
RIP: 0010:rcu_note_context_switch+0x238/0x2a0
Call Trace:
<TASK>
__schedule+0xcf/0x650
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
exp_funnel_lock+0xb2/0x260
synchronize_rcu_expedited+0xe7/0x220
namespace_unlock+0x26a/0x320
put_mnt_ns+0xd3/0x120
mntns_put+0xe/0x20
do_listns+0x13e/0x560
__do_sys_listns+0x126/0x2d0
__x64_sys_listns+0x20/0x30
x64_sys_call+0x2366/0x2390
do_syscall_64+0x105/0x5a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK> |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where improper cleanup of reference counts during error paths could lead to a use-after-free condition. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp->mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where an unprivileged user could cause a use-after-free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: fix use-after-free in unregister_virtio_device()
device_unregister() is device_del() plus put_device(). When the caller
holds no extra reference, that drops the last one and runs the release
callback, which for several transports frees the memory the embedded
struct virtio_device sits in. unregister_virtio_device() then calls
virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed
object.
Affected transports are the ones whose release callback frees and whose
remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml,
mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because
virtio_pci_remove() brackets the call with get_device() and put_device().
Remove the debugfs entries before the device can go away. They are only
accessed through the protected debugfs interface, so
debugfs_remove_recursive() waits for in-progress file operations before
returning. Tearing them down while the device is still alive is therefore
safe.
Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG
by unbinding a virtio-uml device:
BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d
Read of size 8 at addr 00000000616e0b10 by task init/1
__asan_report_load8_noabort
virtio_debug_device_exit+0x36/0x4d
unregister_virtio_device+0x48/0x75
virtio_uml_remove
platform_remove
device_release_driver_internal
unbind_store
Freed by task 1:
kfree
virtio_uml_release_dev
device_release
kobject_put
put_device
device_unregister
With this applied, the report is gone and unbind is clean. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the firmware where an attacker could cause an access of an uninitialized pointer. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability where an unprivileged user could cause a use-after-free condition by issuing a sequence of driver commands. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service and information disclosure. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where an unprivileged user may cause a use-after-free condition by issuing a sequence of driver commands. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, and information disclosure. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where an unprivileged user may cause a use-after-free condition by issuing a sequence of driver commands. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, and information disclosure. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where an unprivileged user may cause a use-after-free condition by issuing a sequence of driver commands. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, data tampering, and information disclosure. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel mode layer where an attacker could cause a use-after-free. A successful exploit of this vulnerability might lead to code execution, denial of service, or escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability where an unprivileged user could cause a use-after-free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user can cause improper release of memory resources, leaving a mapping accessible after the underlying memory is reused. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| The NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel mode driver through which a user might trigger a use-after-free condition. Successful exploitation of this issue could lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the open-source kernel module Resource Server where an unprivileged local user could cause a use-after-free through a missing self-reference guard in the map cleanup path. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode driver where a local user can cause the driver to dereference an untrusted pointer. A successful exploit of this vulnerability might lead to denial of service and information disclosure. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the open-source kernel module event delivery path where an unprivileged local user could cause a use-after-free through a race between asynchronous event delivery and file close. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. |
