| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authentication bypass was found in an unknown area of the SiteOmat source code. All SiteOmat BOS versions are affected, prior to the submission of this exploit. Also, the SiteOmat does not force administrators to switch passwords, leaving SSH and HTTP remote authentication open to public. |
| IBM Controller 11.0.1, 11.1.0, 11.1.1, and 11.1.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. |
| Use of Hard-coded Credentials, Storage of Sensitive Data in a Mechanism without Access Control vulnerability in E-Kent Pallium Vehicle Tracking allows Authentication Bypass.
This issue affects Pallium Vehicle Tracking: before 17.10.2024. |
| FreePBX is an open source IP PBX. From 15.0.42 to before 16.0.45 and 17.0.7, unauthenticated users may be able to access the User Control Panel (UCP) using hard-coded initial template credentials if these were not immediately changed by the Administrator who enabled UCP. Authenticated access to ACP is required for the initial setup of UCP generic templates, but after that, without further steps by the admin, unauthenticated users may be able to gain access. This vulnerability is fixed in 16.0.45 and 17.0.7. |
| Hardcoded credentials in the Basic Authentication setup tool (bin/solr auth enable) in Apache Solr versions 9.4.0 through 9.10.1 and 10.0.0 allows a remote attacker to gain full administrative access to the cluster via publicly known default credentials installed silently alongside the user-specified account.
As an immediate workaround without upgrading, delete the template users (superadmin, admin, search, index) from security.json or change their passwords.
The future, not yet released, versions 9.11.0 and 10.1.0 will not be vulnerable, and it will be enough to upgrade to solve the issue.
Not affected:
* Clusters where bin/solr auth enable was not used to bootstrap BasicAuth
* Clusters where template users have been assigned strong passwords after bootstrap |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). From 0.27.0 to before 0.29.3, a hardcoded BETTER_AUTH_SECRET fallback ("better-auth-secret-123456789") lets an unauthenticated attacker forge email verification JWTs, trigger auto-sign-in as admin, and execute commands on the host via the built-in SSH terminal. This vulnerability is fixed in 0.29.3. |
| Netis AC1200 Router NC21 V4.0.1.4296 contains a hard-coded root credential stored in /etc/shadow.sample. The password for the root account is set to the trivially weak value root, allowing an attacker with access to the device to authenticate as root and gain full control of the underlying operating system. |
| Jinan USR IOT Technology Limited (PUSR) USR-W610 RS232/485 to Wi-Fi/Ethernet Converter
device firmware contains plaintext administrative credentials embedded in the firmware image. These credentials can be extracted through firmware analysis and used to authenticate to device services. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.2, the internode RPC layer authenticates every request with an HMAC-SHA256 signature using a shared secret. The function that produces this secret, get_shared_secret() in crates/ecstore/src/rpc/http_auth.rs, falls back to the public, source-tree-embedded DEFAULT_SECRET_KEY = "rustfsadmin" when neither the RUSTFS_RPC_SECRET environment variable nor the global S3 secret key has been configured. This vulnerability is fixed in 1.0.0-beta.2. |
| SDMC NE6037 cable modem routers running firmware 7.1.6.0.25 and 7.1.6.1.9_B9 contain a hardcoded password vulnerability in the web management interface recovery endpoints (mgmt.php, npcmd.php) that allows unauthenticated attackers to gain root access by submitting the hardcoded credential to the recovery endpoint via HTTP. Attackers can leverage this hardcoded password to enable filtered SSH and Telnet services on the device, resulting in unauthenticated root-level remote access to the underlying system. |
| Weak authentication between the Wireless Control Module (WCM) and the Engine Control Module (ECM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with read access to the in-vehicle network to recover the per-vehicle ECM immobilizer secret by passively observing a single seed/key exchange. The WCM derives its response using a reversible, non-cryptographic operation rather than a cryptographic challenge-response, so the persistent immobilizer secret can be reconstructed from one captured exchange. With this secret the attacker can authenticate to the ECM independently of the WCM and start the engine, defeating the immobilizer. Specific protocol details have been withheld pending vendor remediation. |
| Schneider Electric SoMachine Basic 1.4 SP1 and Schneider Electric Modicon TM221CE16R 1.3.3.3 devices have a hardcoded-key vulnerability. The Project Protection feature is used to prevent unauthorized users from opening an XML protected project file, by prompting the user for a password. This XML file is AES-CBC encrypted; however, the key used for encryption (SoMachineBasicSoMachineBasicSoMa) cannot be changed. After decrypting the XML file with this key, the user password can be found in the decrypted data. After reading the user password, the project can be opened and modified with the Schneider product. |
| Hard-coded cryptographic keys in Admin UI of EZCast Pro II before version 1.17478.177 allows attackers to bypass authorization checks and gain full access to the admin UI |
| Huawei HG630 V2 router contains an authentication bypass vulnerability that allows unauthenticated attackers to obtain administrative access by retrieving the device serial number. Attackers can query the /api/system/deviceinfo endpoint without authentication to extract the SerialNumber field, then use the last 8 characters as the default password to log in to the router. |
| In ScadaBR version 1.2.0, a Use of Hard-Coded Credentials vulnerability could allow an attacker to access the SCADA system as admin. |
| Use of Hard-coded Credentials vulnerability in Utarit Information Technologies SoliPay Mobile App allows Read Sensitive Strings Within an Executable.
This issue affects SoliPay Mobile App: before 5.0.8. |
| A vulnerability has been identified in Teamcenter V2312 (All versions < V2312.0014), Teamcenter V2406 (All versions < V2406.0012), Teamcenter V2412 (All versions < V2412.0009), Teamcenter V2506 (All versions < V2506.0005), Teamcenter V2512 (All versions). The affected application contains hardcoded key which is used for obfuscation stored directly into the application.
This could allow an attacker to obtain these keys and misuse them to gain unauthorized access. |
| Netmaker is a platform for creating and managing virtual overlay networks using WireGuard. Prior to versions 0.8.5, 0.9.4, and 010.0, there is a hard-coded cryptographic key in the code base which can be exploited to run admin commands on a remote server if the exploiter know the address and username of the admin. This effects the server (netmaker) component, and not clients. This has been patched in Netmaker v0.8.5, v0.9.4, and v0.10.0. There are currently no known workarounds. |
| Netmaker makes networks with WireGuard. Prior to versions 0.17.1 and 0.18.6, hardcoded DNS key usage has been found in Netmaker allowing unauth users to interact with DNS API endpoints. The issue is patched in 0.17.1 and fixed in 0.18.6. If users are using 0.17.1, they should run `docker pull gravitl/netmaker:v0.17.1` and `docker-compose up -d`. This will switch them to the patched users. If users are using v0.18.0-0.18.5, they should upgrade to v0.18.6 or later. As a workaround, someone who is using version 0.17.1 can pull the latest docker image of the backend and restart the server. |
| Comarch ERP Optima client makes use of a hard-coded password for a database user. These credentials cannot be changed. It is possible for a remote attacker to gain an access to the database with elevated privileges including executing system commands on a server.
This issue has been fixed in version 2026.4 |
