| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Several buffer-growth sites in libmime performed size arithmetic in 32-bit types without overflow checks. On a sufficiently large message the growth guard could fail open, or the buffer could be reallocated smaller than required, and a subsequent memcpy would then write attacker-controlled data across adjacent heap allocations. This vulnerability was fixed in Thunderbird 158. |
| A malformed header in the binary file fed to QBinaryJson::fromBinaryData() can cause undefined behaviour because of out-of-bounds read. |
| Use after free in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to elevate privileges locally. |
| A flaw was found in EAP's jboss-remoting. A remote unauthenticated attacker who can reach :8080 (or :9990, or :4447) and complete an Upgrade: jboss-remoting handshake can cause OOM errors that degrade requests server-wide, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb->csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: at76c50x-usb: avoid length underflow in at76_guess_freq()
at76_guess_freq() checks only that the received frame is at least a bare
802.11 header (24 bytes) before subtracting the fixed management-body
offset:
len -= el_off;
For both beacon and probe response frames, el_off is 36. If the frame is
shorter than el_off, subtracting it causes the calculated IE length to
wrap. The length is eventually passed to cfg80211_find_elem_match() as a
very large unsigned value, so the element walk runs beyond the RX skb.
This path is reached from at76_rx_tasklet() while scanning. If the device
delivers a truncated beacon or probe response, the oversized IE length
causes an out-of-bounds read during scanning.
Skip the IE lookup if the frame does not reach the variable elements,
before subtracting el_off. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate stream count in sctp_process_strreset_inreq()
When processing a RESET_IN_REQUEST from a peer,
sctp_process_strreset_inreq() derives the stream count from the
parameter length but does not check whether the resulting
RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN.
The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes
larger than the IN request header (sctp_strreset_inreq, 8 bytes).
Generally, the IP payload is bounded to 65535 bytes, so the stream
list cannot be large enough to trigger the overflow. However, on
interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a
stream list that fits within the incoming IN parameter can cause a
__u16 overflow in sctp_make_strreset_req() when computing the OUT
request size, leading to an undersized skb allocation and a kernel
BUG:
net/core/skbuff.c:207 skb_panic
net/core/skbuff.c:2625 skb_put
net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk
net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req
net/sctp/stream.c:655 sctp_process_strreset_inreq
The local setsockopt path validates the generated reset request size.
However, for an incoming-only reset, it accounts for the smaller IN
request even though the peer must generate an OUT request with the same
stream list. Such a request cannot be completed successfully by the
peer.
Reject peer IN requests whose corresponding OUT request would exceed
SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an
IN request that would require an oversized OUT request from the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix u16 MTU truncation in media and bearer MTU validation
Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied
MTU values but only enforce a minimum bound, not a maximum. When a user
sets the MTU to a value exceeding U16_MAX (65535), it passes validation
but is silently truncated when assigned to u16 fields l->mtu and
l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000)
truncate to 0, causing a division by zero in tipc_link_set_queue_limits()
which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing
values (e.g. 65537-131071) produce small incorrect MTU values, resulting
in link malfunction behaviors.
Crash stack (triggered as unprivileged user via user namespace):
tipc_link_set_queue_limits net/tipc/link.c:2531
tipc_link_create net/tipc/link.c:520
tipc_node_check_dest net/tipc/node.c:1279
tipc_disc_rcv net/tipc/discover.c:252
tipc_rcv net/tipc/node.c:2129
tipc_udp_recv net/tipc/udp_media.c:392
Two independent paths lack the upper bound check:
1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET)
2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET)
Fix both by rejecting MTU values above U16_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix 32-bit overflow in CWSR total size calculation
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
[ idryomov: rename new_state_len -> new_state_item_size, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: fix out-of-bounds bitmap_set() with zero-length range
ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk
as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the
unsigned subtraction underflows to SIZE_MAX, producing a huge
last_blk and nr_blks value that causes bitmap_set() to write far
beyond the ifs->state allocation.
Regarding ifs_set_range_uptodate(), it is temporarily safe because len
cannot be passed in as 0. However, for ifs_set_range_dirty() this is
reachable from __iomap_write_end(): when copy_folio_from_iter_atomic()
returns 0 (e.g. user buffer fault) and the folio is already uptodate,
the guard at the top of __iomap_write_end() does not trigger because
!folio_test_uptodate() is false, and iomap_set_range_dirty() is called
with copied == 0.
Add a !len guard to both functions before the computation, so that a
zero-length range is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: llsec: reject frames shorter than the authentication tag
llsec_do_decrypt_auth() computes the associated-data length for the
AEAD request as
assoclen += datalen - authlen;
where datalen is the number of bytes after the MAC header and authlen
(4, 8 or 16) is the length of the authentication tag. Nothing verifies
that the frame actually carries at least authlen payload bytes. A
secured frame whose payload is shorter than the tag makes
datalen - authlen negative; assoclen is then passed to
aead_request_set_ad() as an unsigned value close to 4 GiB, so
crypto_aead_decrypt() walks far off the end of the scatterlist that
only spans the real frame.
The frame is fully attacker-controlled and reaches this path from any
IEEE 802.15.4 peer in radio range. Reject frames whose payload is
shorter than the authentication tag before the subtraction.
Dynamically reproduced on a KASAN kernel as a general-protection-fault
in the AEAD scatterwalk, and the fix confirmed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: fix integer overflow in image size
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
When the scatterlist ring is full or nearly full, bpf_msg_push_data()
enters a copy fallback path and computes copy + len for the page
allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING
and both are u32, a crafted len can wrap the sum to a small value,
causing an undersized allocation followed by an out-of-bounds memcpy.
BUG: unable to handle page fault for address: ffffed104089a402
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:105)
bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788)
bpf_prog_9ed8b5711920a7d7+0x2e/0x36
sk_psock_msg_verdict (net/core/skmsg.c:934)
tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584)
__sys_sendto (net/socket.c:2206)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add an overflow check before the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject oversized nested action attrs
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3ff ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
